BAOFENG F22

Contents

Baofeng F22 Mini Walkie Talkie User Manual

Model: F22

Introduction

The Baofeng F22 Mini Walkie Talkie is a versatile FRS transceiver designed for reliable communication. It combines advanced radio communication technology with a sturdy mechanical frame, making it an ideal solution for both professionals and leisure users who need to stay connected. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and safety.

For a more detailed guide, a PDF version of the user manual is available: User Manual (PDF)

Safety Information

Important Warnings

  • Replacement or substitution of transistors, regular diodes, or other parts with non-recommended components may violate technical regulations.
  • The radio transmits a regulated signal on an assigned frequency. Any adjustments must be made by qualified technicians.
  • This device complies with FCC Part 15 rules. Operation is subject to not causing harmful interference and accepting any interference received.

Operating Prohibitions

  • Do not operate the product in locations containing fuels, chemicals, explosive atmospheres, or other flammable/explosive materials.
  • Do not operate near or in any blasting area.
  • Avoid operating near medical or electronic equipment vulnerable to RF signals.
  • Do not hold the product while driving.
  • Do not operate in areas where wireless communication equipment is prohibited.

Important Tips for Use

  • Use only authorized or undamaged accessories.
  • Keep the product at least 2.5 centimeters away from your body during transmission.
  • Avoid prolonged reception at high volume.
  • In vehicles with airbags, do not place the product in the airbag deployment area.
  • Keep the product and accessories out of reach of children and pets.
  • Operate within the specified temperature range.
  • Continuous transmission may lead to heat accumulation; allow for cooling.
  • Handle the product with care.
  • Do not disassemble, modify, or repair the product or its accessories without authorization.

Precautions for Batteries

  • Do not charge or replace batteries in hazardous environments.
  • Do not charge wet batteries; dry them with a soft, clean cloth first.
  • Do not charge deformed, leaking, or overheated batteries.
  • Do not charge with an unauthorized charger.
  • Do not charge in locations with strong radiation.
  • Avoid overcharging, as it shortens battery life.
  • Do not dispose of batteries in fire.
  • Do not expose batteries to direct sunlight or other heating sources.
  • Do not squeeze, penetrate, or remove the battery housing.

Package Contents

The number of items may vary depending on the package purchased.

Package ContentGeneral (2pcs)Extreme (2pcs)Excellence (4pcs)Honorable (6pcs)
Radio2246
Li-ion Battery2246
Belt Clip2246
Lanyard2246
Desktop Charger0120
Six-unit Desktop Charger0001
Headset0246
Owner's Manual1111

Product Overview

Labeled diagram of the Baofeng F22 walkie talkie
Labeled diagram of the Baofeng F22 walkie talkie, showing antenna, LCD, buttons (MENU, CALL, SCAN, UP, DOWN, MONI, PTT), speaker, accessory port, Type-C USB charging port, battery release latch, flashlight, belt clip, and dimensions.

Key Components

  1. NOAA Weather Band Indicator
  2. Scan Indicator
  3. VOX Indicator
  4. Dual Watch Indicator
  5. CTC Indicator
  6. DCS Indicator
  7. Channel Indicator
  8. Emergency Alert Indicator
  9. Transmit Status Indicator
  10. Receive Status Indicator
  11. Keypad Lock Indicator
  12. Volume Level Indicator
  13. DCS / CTCSS Privacy Code Numbers
  14. Antenna
  15. Backlit LCD Display
  16. UP Button
  17. Menu/Lock Button
  18. Power/Call Button
  19. DOWN Button
  20. Speaker
  21. Flashlight
  22. Belt Clip Lock Tab
  23. Weather/Monitor Button
  24. Belt Clip
  25. Accessory Port
  26. Scan Button
  27. Type-C USB Charging Port
  28. Battery Release Latch
  29. PTT (Push-To-Talk) Button
  30. Flashlight/Emergency Button

Main Features

  • 22 FRS Channels
  • 12 NOAA Weather Channels (FRS Version only)
  • 2 Channels Watch
  • Channel Monitor
  • 155 Privacy Codes (50 CTCSS codes / 105 DCS codes)
  • Hands-Free Operation (VOX)
  • Roger Beep Tone
  • Battery Level Meter
  • Battery/Power Saver
  • Low Battery Audible Alert
  • 2pin Kenwood headset jack
  • Li-Ion 1400mAh battery pack
  • Output power: ≤2W (channels 1-7 and 15-22)
  • NOAA Weather Scan
  • Privacy Codes Scan and Store
  • Channel Scan Function
  • 10 Selectable Call Alerts
  • Call Alert
  • Keypad Lock
  • Emergency Strobe Light
  • Backlit LCD Display
  • TOT (Time out timer)
  • Type-C USB connector for charging
  • Keystroke Tones
  • Battery Life: up to 18 hours (under typical use conditions)

Setup

1. Installing the Battery

The radio can operate with either a Li-ion battery pack or optional 3 AA alkaline batteries. Remove the belt clip first to facilitate battery installation.

Installing the Li-ion Battery

  1. Turn the radio off.
  2. With the back of the radio facing you, remove the belt clip.
  3. Lift the battery cover latch up and remove the cover.
  4. Remove the Li-ion battery pack from its plastic bag.
  5. Insert the Li-ion battery pack with the diagram facing you. Incorrect installation may damage the unit.
  6. Close the battery cover and replace the belt clip, ensuring it locks into place.

Installing Three AA Ni-MH Batteries (Rechargeable)

Warning: Ni-MH batteries are rechargeable and must not be mixed with alkaline batteries.

  1. Turn off the radio.
  2. With the back of the radio facing you, lift the battery cover latch up and remove the cover.
  3. Insert three AA Ni-MH batteries with correct + and – polarity as shown. Incorrect installation will cause the unit to fail or be damaged.
  4. Close the battery cover and replace the belt clip, ensuring it locks into place.

Installing Three AA Alkaline Batteries (Non-rechargeable)

Warning: Alkaline batteries are for emergency use only and cannot be recharged. Charging alkaline batteries poses an explosion risk.

  1. Turn the radio off.
  2. With the back of the radio facing you, lift the battery cover latch up and remove the cover.
  3. Insert three AA Alkaline batteries with correct + and – polarity as shown. Incorrect installation will prevent operation or damage the unit.
  4. Close the battery cover and replace the belt clip, ensuring it locks into place.
Diagram showing power sources and charging options
Power sources diagram showing rechargeable battery pack and 3xAA non-rechargeable alkaline batteries, with Type-C USB charging options (wall adapter, power bank, PC, vehicle).

2. Installing the Belt Clip

To install, slide the clip down into the slot on the back of the radio until the belt clip-latch clicks. To remove, press the Lock-tab down and gently pull the belt clip up.

Steps for installing battery cover and belt clip
Installation steps for attaching the battery cover and belt clip, and wearing the radio on a belt.

3. External Speaker/Microphone Jack

The radio can be used with an optional external speaker/microphone or headset. This frees your hands for other tasks.

  1. Open the rubber cap on the side of the radio.
  2. Insert the plug(s) into the SPK/MIC jacks.
  3. Place the earbud into your ear and adjust the microphone to your desired position.

4. Using a Headset

For private communications, lift the rubber cover from over the headset jack and plug in the headset. Your radio is not submersible or waterproof when using a headset. When removing the headset, ensure the jack cover is fully pressed into place to restore its waterproof capability.

5. Charging the Battery

Warning: To avoid personal injury or property damage, use only accessories specifically designed for this product.

Charging the Radio via Type-C USB Port

  1. Connect the Type-C USB connector cable to the radio's Type-C USB port.
  2. Connect the other end to an outlet that provides USB charging power (e.g., wall adapter, power bank, PC).
  3. Charge the batteries for 6 hours until the battery indicator stops flashing.

Using the Charging Cradle (if included)

  1. Connect the AC adapter (not included) with a USB connector cable to the charging cradle's Type-C USB port. Connect the other end to a standard AC wall outlet.
  2. Place the charging cradle on a desk and place the radio in the cradle with the keypad facing forward.
  3. Charge the batteries for 6 hours.

Note: Use only supplied batteries, USB Charger, or approved accessories. Charge time may vary. Batteries must be installed for operation. If battery power is low, the radio cannot operate. If you try to transmit with low power, the radio will automatically turn off.

USB Type-C Charging options
USB Type-C Charging options: vehicle charging, USB wall adapter, power bank, PC charging.

Operating Instructions

1. Turning On/Off and Volume

  1. Press and hold the [U/CALL] button to turn the radio on.
  2. To change the volume level, press the UP or DOWN buttons to increase or decrease the volume.
  3. Press and hold the [U/CALL] button to turn the radio off.

2. Choosing a Channel

Your radio has 22 channels and 155 Privacy codes. For communication, both radios must be set to the same channel and Privacy code.

  1. Press the [MENU] button once.
  2. Use the UP or DOWN buttons to select one of the 22 FRS channels.
  3. Confirm selection by pressing the [PTT] button or press [MENU] again to move to the next feature setting.

Note: Channels 1-7 and 15-22 use high-power transmission. Channels 8-14 use low-power transmission.

3. Talking on Your Radio (PTT)

  1. Press and hold the [PTT] button. Speak in a clear, normal voice 2-3 inches away from the microphone. The TX icon appears on the display. Pause slightly after pressing [PTT] before speaking to avoid cutting off the beginning of your transmission.
  2. Release the [PTT] button when finished speaking to receive incoming calls. The RX icon will display when receiving.

4. Monitor Mode Feature

This feature allows you to listen for weak signals on the current channel.

  • To turn ON: Press and hold [MONI] for 2 seconds until two beeps sound. The receiver circuit opens, allowing all noise and weak signals to be heard. The RX icon blinks.
  • To turn OFF: Press and hold [MONI] for 2 seconds to return to 'Normal' mode. Two beeps sound, and the RX icon stops blinking.

5. Channel Scanning

Your radio can scan all 22 channels for activity.

  • To enter, quickly press the [SCAN] button. The radio will rapidly scan channels and stop on any active channel.
  • Scanning resumes after 5 seconds if the channel becomes inactive.
  • If you press [PTT] on an active channel, scanning stops for 10 seconds.
  • To resume scanning, quickly press the UP or DOWN button.

6. Scanning Privacy Codes

Press and hold the [SCAN] button to enter Privacy Codes scanning. A flashing 'CTC/DCS' indicator will appear. The lower display will cycle through privacy codes. Once a code is determined, the 'CTC/DCS' indicator will stop flashing. Press [PTT] to save the scanned tone.

7. Using the Flashlight

The radio has a high-intensity LED flashlight for emergencies.

  1. Press the Flashlight button once for continuous illumination (Always On mode).
  2. Press the Flashlight button again for Strobe SOS signal (Strobe SOS mode).
  3. Press the Flashlight button a third time to turn the light off.

8. Emergency Alert

This feature signals group members for help.

  • To activate: Press and hold the Flashlight/Emergency button for 3 seconds. The Emergency Alert icon appears, a loud siren sounds, and the flashlight flashes.
  • To deactivate: Press and hold the Flashlight/Emergency button again for 3 seconds.

WARNING: Use the Emergency Alert feature only in actual emergencies.

9. NOAA Weather Radio/Scan Weather Channel (Just for USA)

The NOAA Weather Radio function allows you to receive weather reports from designated NOAA stations. While in Weather Radio mode, FRS communications are not possible.

NOAA Service weather alerts
NOAA Service graphic showing weather alerts for blizzard, fires, earthquakes, rainstorm, and the walkie talkie in a stormy setting.
  1. To turn NOAA Weather Scan ON: Press and hold the [MONI] button for 5 seconds while in FRS mode. The NOAA icon appears, and the radio scans all 12 weather channels, stopping on any active one. Scanning resumes after 10 seconds of inactivity.
  2. To stop NOAA Weather Scan and set channel manually: Press the [SCAN] button during scan. The radio stops scanning, and the display shows the current Weather band channel.
  3. While in Weather band mode, press [MENU], then UP or DOWN to select a desired weather channel. Press [MENU] to confirm.
  4. To exit Weather Radio broadcast mode: Press and hold [MONI]. The NOAA icon disappears.

10. Working the MENU System

The FRS Menu List provides access to various settings.

Privacy Codes

The radio uses CTCSS (50 codes) and DCS (105 codes) to reduce interference. Both radios must use the same channel and privacy code for communication. Privacy codes can only be set on channels 1-22.

  1. Press [MENU] twice.
  2. Use UP or DOWN to select between 'OF/CT/DC'.
  3. Press [MENU] again, then use UP or DOWN to select a CTCSS or DCS code.
  4. Confirm with [PTT] or press [MENU] to move to the next setting.

Note: Selecting a CTCSS code cancels any pre-selected DCS code, and vice-versa. 'OF' disables the privacy feature.

VOX (Hands-Free Transmission)

The radio has 3 VOX level settings (oF/1/2/3).

  1. Press [MENU] until 'vox' blinks.
  2. Use UP or DOWN to select '1', '2', or '3'. '1' is most sensitive, '3' is least.
  3. Confirm with [PTT] or press [MENU] to move to the next setting.
  4. To turn VOX off, select 'oF'.

Ten Call Tone Settings

The radio has 10 selectable call alerts.

  1. Press [MENU] until 'cA' appears.
  2. Use UP or DOWN to select a call alert. The radio will emit a tone for each selection.
  3. Confirm with [PTT] or press [MENU] to move to the next setting.

Keypad Silent Operation

This mode disables keypad beeps and tones.

  1. Press [MENU] until 'bp' appears.
  2. Use UP or DOWN to select 'on' or 'oF'.
  3. Confirm with [PTT] or press [MENU].

Roger Beep (End of Transmission) Tone

A tone sounds when the [PTT] button is released, confirming transmission has ended.

  1. Press [MENU] until 'rb' appears.
  2. Use UP or DOWN to select 'on' or 'oF'.
  3. Confirm with [PTT] or press [MENU].

11. Dual Watch Function

This function allows scanning two channels for activity. The first channel is the current setting, and the second is selected in the MENU.

  1. Press [MENU] until 'oF' blinks and 'du' appears.
  2. Use UP or DOWN to select the second channel.
  3. Press [MENU] again, then use UP or DOWN to choose the Privacy Code (oF/dc/ct).
  4. Press [MENU] again, then use UP or DOWN to set the Privacy Code.
  5. Confirm with [PTT] or press [MENU]. The DW icon appears, and channels flash alternately.
  6. To turn off, press the [SCAN] button.

Maintenance

General Maintenance Instructions

  • Clean accumulated dust on the charging connector regularly with a clean, dry cloth.
  • Charge the battery between 5°C and 40°C. Violating this range may reduce battery life or cause leakage.
  • Turn off the product when charging an attached battery to ensure a full charge.
  • Do not remove the battery or unplug the power cord during charging.
  • Handle the product with care.
  • Do not disassemble, modify, or repair the product and its accessories without authorization.

Transportation Instructions

  • Damaged batteries must not be transported.
  • To avoid short circuits, separate batteries from metal parts or each other if transporting multiple batteries in one package.
  • The radio must be switched off and secured against accidental activation if the battery is attached.
  • Declare the shipment content in shipping documents and use a Battery Shipping Label on the packaging. Consult your hauler for local regulations.

Troubleshooting

PhenomenaAnalysisSolution
Cannot turn on the radio.Battery installed improperly, battery power low, or poor contact.Remove and reattach battery, recharge/replace battery, clean contacts.
Weak or intermittent voice during reception.Battery voltage low, volume low, loose/incorrect antenna, blocked speaker.Recharge/replace battery, increase volume, reattach antenna, clean speaker.
Cannot communicate with other group members.Inconsistent frequency/signaling type, too far from others.Verify TX/RX frequency and signaling type, move closer.
Hear unknown voices or noise.Interrupted by other radios, radio in analog mode without signaling.Change frequency, adjust squelch level, set signaling.
Unable to hear due to too much noise/hiss.Too far, unfavorable position (blocked by buildings), external disturbance.Move closer, move to open area, restart radio, avoid interference sources.
Radio keeps transmitting.VOX turned on or headset not installed correctly.Turn off VOX, check headset installation.

If these solutions do not resolve your issues, please contact your dealer for technical support.

Specifications

AttributeValue
Channels22 FRS / 12 Weather
Sub-Codes50 CTCSS Tones / 105 DCS Codes
Frequency Range446MHz (PMR) / FRS
Operation VoltageDC 3.7 V ±10%
RF Output Power0.5W-3W (max ≤2W for channels 1-7 and 15-22)
FM Modulation11K0F3E@12.5KHz
Adjacent Channel Power60dB @ 12.5KHz
Transmission Current≤1000mA
Battery Capacity1400mAh
Waterproof / Water-ResistantNo
MaterialPlastic
Dimensions (include antenna)5.48*17.5*3.4cm (2.16in width, 1.34in depth, 6.89in height)

Note: All specifications are subject to change without prior notice or liability.

FRS Frequency Chart (MHz)

CH.NoCH.Freq.RF PowerCH.NoCH.Freq.RF Power
1462.5625High12467.6625Low
2462.5875High13467.6875Low
3462.6125High14467.7125Low
4462.6375High15462.5500High
5462.6625High16462.5750High
6462.6875High17462.6000High
7462.7125High18462.6250High
8467.5625Low19462.6500High
9467.5875Low20462.6750High
10467.6125Low21462.7000High
11467.6375Low22462.7250High

NOAA Weather Radio Frequency List (US, CAN, AND INTL)

Channel No.RX Freq.(MHz)Channel No.RX Freq.(MHz)
1162.55007162.5250
2162.40008161.6500
3162.47509161.7750
4162.425010161.7500
5162.450011162.000
6162.500012163.275

User Tips

  • Ease of Use: The Baofeng F22 is designed to be user-friendly, making it a great tool for both adults and children.
  • Regional Frequencies: For European countries (e.g., Russia, Spain, France, Italy, Poland, Netherlands, Ukraine, Belarus, England, Germany), use the PMR 446MHz version.
  • Interoperability: These radios can communicate with other FRS radios regardless of brand, as long as they are set to the same channel and CTCSS/DCS codes.
  • Flexible Power Options: The radio can be powered by its included Li-ion battery pack or by three AA batteries (not included). This flexibility ensures you can always have power. Remember, alkaline AA batteries are for replacement only and cannot be recharged; NiMH AA batteries can be recharged.
  • Convenient Charging: The Type-C USB charging port allows for versatile charging in a car, with a power bank, or via a computer, which is especially convenient for outdoor activities or travel.
  • Range Expectations: While the walkie talkies can achieve a range of up to 3 miles in open areas, this range will be reduced in environments with buildings or other obstructions. Expect shorter ranges in urban or heavily forested areas.

Warranty and Support

Disclaimer

The Company strives for accuracy and completeness in this manual. However, no warranty of accuracy or reliability is given. All specifications and designs are subject to change without notice due to continuous technological development. No part of this manual may be copied, modified, translated, or distributed without the prior written consent of the Company. We do not guarantee the accuracy, validity, timeliness, legitimacy, or completeness of third-party products and content involved in this manual.

Precautions for Disposal

Once the service life of our products (including radios and batteries) has ended, they should not be disposed of as household garbage. Their recycling and disposal must comply with your local regulations.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.