XAG CM13600S

Contents

CM13600S Charger User Manual

For XAG P150 Pro and P60 Pro Agricultural Drones

1. Introduction

The CM13600S Charger is a high-performance, intelligent fast-charging solution designed specifically for XAG P150 Pro and XAG P60 Pro agricultural drones. This charger is engineered to deliver safe, efficient, and reliable power replenishment, supporting balanced charging of high-capacity lithium polymer (LiPo) drone batteries used in precision farming operations.

It features advanced temperature monitoring, over-voltage protection, short-circuit prevention, and automatic cell balancing to maximize battery lifespan and operational safety. With an optimized output, the CM13600S significantly reduces downtime between flights, making it ideal for time-sensitive field applications such as crop spraying, mapping, and scouting. Its compact, ruggedized design ensures durability in demanding outdoor environments. The intuitive LED display provides real-time status updates including voltage, current, and charge progress.

This charger is compatible exclusively with batteries designated for XAG P150 Pro and XAG P60 Pro systems and does not support third-party or non-XAG battery packs. It includes universal AC input (100–240V, 50/60Hz), making it suitable for global use, and comes with all necessary cables for immediate deployment. For professional agritech users seeking consistent, rapid, and secure charging without compromising on safety or performance, the CM13600S Charger is an essential addition to any farm drone workflow.

2. Safety Information

WARNING: Read all safety warnings and instructions before using the charger. Failure to follow these warnings and instructions may result in electric shock, fire, serious injury, or property damage.

General Safety Precautions

  • Always operate the charger in a clean, well-ventilated area.
  • Do not expose the charger to rain, moisture, or wet conditions.
  • Avoid operating the charger in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
  • Keep children and bystanders away from the charger during operation.
  • Ensure the charger is disconnected from the power source when not in use or before performing any maintenance.
  • Do not use the charger if it has been damaged or modified.
  • Avoid blocking ventilation openings on the charger.

Electrical Safety

  • Ensure the power outlet matches the charger's input specifications (100-240V~, 50/60Hz).
  • Do not modify the power plug in any way.
  • Avoid body contact with earthed or grounded surfaces (e.g., pipes, radiators).
  • Do not abuse the power cord. Keep it away from heat, oil, sharp edges, and moving parts.

Battery Handling Safety

  • Only charge batteries specified for XAG P150 Pro and P60 Pro drones. Using other batteries may cause fire or injury.
  • Do not short-circuit battery terminals. Keep batteries away from metal objects when not in use.
  • Do not expose batteries to fire or excessive temperatures (above 130°C / 265°F).
  • If battery liquid comes into contact with skin or eyes, flush with water immediately and seek medical attention.

The CM13600S charger incorporates advanced safety features including temperature monitoring, over-voltage protection, short-circuit prevention, and automatic cell balancing to ensure safe charging.

3. Product Overview

The CM13600S Charger is a robust and efficient power supply unit designed for XAG agricultural drone batteries. It features a durable aluminum alloy casing and a multi-pin connector for secure battery connection.

Components

  • Charger Unit: Main body housing the charging circuitry and controls.
  • Power Cable: Connects the charger to an AC power source.
  • Battery Connector Cable: Connects the charger to the drone battery.
  • LED Indicators: Provide visual feedback on charging status and errors.
  • Ventilation Grilles: Located on the sides for heat dissipation.
  • Label: Contains model information, input/output specifications, and safety warnings.

Visual Reference

Video: Overview of the CM13600S Charger, highlighting its features and compatibility with XAG P150 Pro and P60 Pro drones.

Close-up of CM13600S charger label showing model and electrical specifications

Image: Close-up view of the charger's information label, detailing model (M2CM13600C), working temperature, input, and output specifications.

Overall view of the CM13600S charger with its cable and multi-pin connector

Image: The CM13600S charger unit with its attached battery connector cable.

4. Setup

  1. Unpack the Charger: Carefully remove the CM13600S charger and all accessories from its packaging. Inspect for any signs of damage.
  2. Placement: Place the charger on a stable, flat, non-flammable surface in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Ensure adequate space around the charger for proper airflow.
  3. Connect to AC Power:
    • Ensure the charger is switched off.
    • Connect the AC power cable to the charger's AC input port.
    • Plug the other end of the AC power cable into a suitable electrical outlet (100-240V~, 50/60Hz).
    • The charger's LED indicators may briefly illuminate to confirm power connection.
  4. Prepare Battery: Ensure the XAG drone battery is clean and free from any debris or damage.

5. Operation

Charging Process

  1. Connect Battery: Carefully align the multi-pin connector of the charger's battery cable with the port on the XAG drone battery. Push firmly until it clicks into place, ensuring a secure connection.
  2. Initiate Charging: Once the battery is securely connected and the charger is powered on, the charging process should begin automatically. The LED indicators on the charger will display the charging status.
    • LED Indicators: Refer to the charger's specific LED patterns for charge progress (e.g., solid light for charging, blinking for errors, green for fully charged).
    • Real-time Status: The intuitive LED display provides real-time updates on voltage, current, and charge progress.
  3. Monitor Charging: Periodically check the charger and battery during the charging cycle. If any unusual heat, smoke, or odor is detected, immediately disconnect the charger from the power source and the battery.
  4. Charging Completion: The charger will automatically stop charging when the battery is full. The LED indicators will change to reflect a full charge status.
  5. Disconnect Battery: Once charging is complete, first disconnect the battery connector cable from the drone battery. Then, unplug the AC power cable from the wall outlet.

CAUTION: Do not leave charging batteries unattended for extended periods.

6. Maintenance

Cleaning

  • Regularly clean the exterior of the charger with a soft, dry cloth.
  • Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the casing and internal components.
  • Ensure ventilation grilles are free from dust and debris to maintain proper airflow. Use a soft brush or compressed air to gently clear any blockages.

Storage

  • When not in use, store the charger in a cool, dry place, away from direct sunlight, extreme temperatures, and moisture.
  • Keep the charger and cables neatly organized to prevent damage.
  • Store out of reach of children.

Inspection

  • Periodically inspect the power cable and battery connector cable for any signs of wear, cuts, or damage. Replace if necessary.
  • Check the charger casing for cracks or other physical damage.
  • If any issues are found, discontinue use and contact customer support.

7. Specifications

FeatureSpecification
ModelCM13600S (M2CM13600C)
CompatibilityXAG P150 Pro, XAG P60 Pro Agricultural Drone Batteries
Working Temperature-20°C to 40°C (-4°F to 104°F)
AC Input 1100-120V~, 50/60Hz, 15.0A
DC Output 159.92V — 35A (Max)
AC Input 2220-240V~, 50/60Hz, 16.0A
DC Output 259.92V — 80A (Max)
MaterialAluminum alloy
Package Dimensions (L x W x H)50 cm x 50 cm x 50 cm (approx.)
Package Weight3.0 kg (approx.)

8. Troubleshooting

No specific troubleshooting guide is provided with this product. If you encounter any issues with your CM13600S Charger, please refer to the LED indicators for error codes or status. Common issues might include:

  • No Power: Check AC power connection, wall outlet, and power cable for damage.
  • Not Charging: Ensure the battery is securely connected and compatible. Check for any error indications on the LED display.
  • Overheating: Ensure the charger is in a well-ventilated area and its vents are not blocked. Disconnect immediately if excessive heat is detected.

For persistent problems, contact customer support for assistance.

9. User Tips

No specific user tips were available from customer reviews or Q&A for this product. However, general best practices for drone battery chargers include:

  • Always use the charger in a clean, dry, and well-ventilated environment to prevent overheating and ensure optimal performance.
  • Regularly inspect both the charger and battery for any signs of wear or damage before each use.
  • For maximum battery lifespan, avoid fully discharging batteries frequently and store them at recommended charge levels if not used for extended periods.

10. Warranty and Support

For detailed warranty information, please refer to the official product documentation. A user manual in PDF format is available for download, which may contain specific warranty terms and conditions. You can access this document via the following link:

View User Manual (PDF)

For technical support, service, or any questions regarding your CM13600S Charger, please contact the seller or manufacturer directly. Ensure you have your product model and purchase details ready when seeking support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.