Loefme HB05/HB07

Contents

LOEFME 3x3M Pop Up Gazebo Instruction Manual

Model: HB05/HB07

1. Important Precautions

To ensure the best experience with your LOEFME Pop Up Gazebo and to ensure safety, please adhere to the following regulations:

  • Always follow the instructions provided for installing and dismantling the tent.
  • At least two people are required for assembly to ensure a smooth installation. Attempting to assemble the tent alone may cause uneven force on parts, potentially leading to damage.
  • Do not assemble or use the tent in rainy, windy, or snowy weather conditions, as this can damage the tent. The gazebo is designed for mild weather conditions.
  • Ensure ropes are tightened when using the gazebo. Avoid prolonged use in strong winds or severe weather.
  • Store the tent in a cool and dry place to promote repeated use and extend its service life.
  • Keep children away from the tent during setup and dismantling to prevent injury.
  • Ensure the tent is completely dry before storage to prevent mold and damage.
  • Avoid direct sunlight and humid environments when storing.
  • Keep the tent fabric away from open flames, as it is flammable.

Attention:

To avoid tent collapse or personal injury, strictly follow the instructions when installing the ropes and during all assembly steps.

2. Package Contents

The 3x3m Pop Up Gazebo package includes the following components:

  • Folding Rack: 1
  • Topside Cloth: 1
  • Rope: 4
  • Ground Spike: 8
  • Side Cloth: 4
  • Handbag: 1

3. Setup Instructions (Open Operation)

Follow these steps for quick and easy assembly:

  1. Step 1: Stand up the folding frame.

    Diagram showing the initial step of unfolding the gazebo frame.

    Image: Initial unfolding of the gazebo frame.

  2. Step 2: Gently spread the frame.

    With two people, hold the four corners of the tent and gently shake to slightly spread the cross pole of the tent frame.

    Diagram showing two people spreading the gazebo frame.

    Image: Two people spreading the gazebo frame.

  3. Step 3: Put on the topside cloth.

    Place the main canopy cloth over the top of the partially opened frame.

    Diagram showing the topside cloth being placed on the frame.

    Image: Placing the topside cloth.

  4. Step 4: Top off the frame and secure it.

    Fully extend the frame until it locks into place, ensuring the canopy is taut.

    Diagram showing the frame fully extended and secured.

    Image: Fully extended and secured frame.

  5. Step 5: Stretch up and secure at the same height.

    Adjust the legs to your desired height (74", 76", or 79" / 188cm, 194cm, or 200cm) using the thumb-pressed push buttons and leg extenders, ensuring all legs are at the same height for stability.

    Diagram showing the gazebo being stretched up and secured at a specific height.

    Image: Adjusting gazebo height.

  6. Step 6: Installation of side cloths, secured with Velcro.

    Attach the four side cloths using the integrated Velcro fasteners. Two side cloths feature windows, and two have zippers for entry/exit.

    Diagram showing side cloths being installed and secured with Velcro.

    Image: Attaching side cloths.

  7. Step 7: Tie off the rope and secure the ground spikes.

    For added stability, especially in light wind, tie the provided ropes to the d-rings on the tent and secure them to the ground using the eight ground spikes.

    Diagram showing ropes being tied and ground spikes being secured.

    Image: Securing the gazebo with ropes and ground spikes.

4. Operating Instructions (Close Operation)

Follow these steps to dismantle and store your gazebo:

  1. Step 1: Remove side cloths and lower the frame.

    Remove all four side cloths. Press the iron pellets on the legs to release the locking mechanism and begin lowering the frame.

    Diagram showing removal of side cloths and initial lowering of the frame.

    Image: Removing side cloths and starting to lower the frame.

  2. Step 2: Press the iron pellet.

    Continue pressing the iron pellets on each leg to fully collapse the frame.

    Diagram showing pressing the iron pellet to collapse the frame.

    Image: Collapsing the frame by pressing iron pellets.

  3. Step 3: Close the frame and focus on the center.

    Gently push the frame inwards from all sides, guiding it to fold compactly towards the center.

    Diagram showing the frame being closed towards the center.

    Image: Folding the frame inwards.

  4. Step 4: Finish and store it.

    Once fully collapsed, place the frame and all fabric components into the portable carry bag for storage.

    Diagram showing the gazebo fully folded and ready for storage.

    Image: Gazebo folded and ready for storage in its carry bag.

5. Maintenance

Proper maintenance will extend the life of your gazebo:

  • Cleaning: Clean the fabric with mild soap and water. Do not use harsh chemicals or abrasive cleaners.
  • Drying: Always ensure the canopy and side cloths are completely dry before folding and storing to prevent mold and mildew.
  • Storage: Store the gazebo in its carry bag in a cool, dry place, away from direct sunlight and excessive humidity.
  • Frame Inspection: Periodically check the steel frame for any signs of damage, rust, or loose connections. Tighten any loose bolts or screws.
  • Fabric Inspection: Regularly inspect the fabric for tears, holes, or weakened seams. Repair small damages promptly to prevent them from worsening.

6. Troubleshooting

Here are some common issues and their solutions:

  • Difficulty in Assembly/Dismantling: Ensure at least two people are assisting. Uneven force can make the process difficult and potentially damage parts.
  • Gazebo Instability: Verify that all legs are extended to the same height and locked securely. Ensure ropes are tightened and ground spikes are firmly secured, especially in breezy conditions.
  • Water Accumulation on Canopy: Ensure the canopy is taut and properly secured to the frame. In heavy rain, water can pool if the canopy sags. Adjust height if possible to create better runoff.
  • Damage from Weather: The gazebo is designed for mild weather. Avoid use in strong winds, heavy rain, or snow to prevent damage to the frame and fabric.

7. Specifications

FeatureSpecification
Product NamePop-Up Tent
Model NumberHB05/HB07
TypeGazebo
Assembly RequiredYes
Product Size (Assembled)3m x 3m (10ft x 10ft)
Height Positions3 positions: 74" (188cm), 76" (194cm), 79" (200cm) or 8.1FT (247cm), 8.3FT (253cm), 8.5FT (259cm)
Folded Frame Size119cm x 19cm x 22cm
Sail Material210D Silver-Coated Oxford Cloth
Frame MaterialReinforced Steel Frame
Iron Ejector & Crossbar10x18mm
Iron Leg Tube25x25/20x20x0.5mm
Sun ProtectionUV50+ Sun Protection
Side Cloths2 window cloths, 2 zipper cloths
CoverageFits up to 10 people
Special FeaturesOne-click pop-up design, tool-free pre-assembled canopy, smart lock tech, reinforced seam design

All sizes are approximate.

Product size diagram showing 3m x 3m x 2.5m dimensions and folded frame size.

Image: Product dimensions and folded size.

Diagram illustrating the three adjustable height positions of the gazebo.

Image: Adjustable height positions.

8. User Tips

  • Team Assembly: Always assemble with at least one other person. This prevents damage to the frame and makes the process much easier and safer.
  • Weather Awareness: While the gazebo offers sun and some rain protection, it's best suited for mild weather. For prolonged use or in unpredictable conditions, consider additional anchoring.
  • Secure Anchoring: Even in calm weather, use the provided ropes and ground spikes to secure the gazebo. This adds stability and prevents unexpected movement.
  • Dry Storage: After use, especially if it has been exposed to moisture, ensure all fabric parts are completely dry before packing away to avoid mildew and unpleasant odors.

9. Warranty and Support

LOEFME is committed to providing excellent after-sales service. If you encounter any product issues, please contact us promptly. We will work to resolve your problem satisfactorily.

Contact Information:

  • Email: support@loefme.com
  • Manufacturer/Exporter: SHEN ZHEN XIN SHENG SHANG TECHNOLOGY CO.,LTD.
  • Production Site: Room 303, Building 9, No. 54-6, Guanlan Avenue, Xinhe Community, Fucheng Street, Longhua District, Shenzhen City, Guangdong Province, China, 518000
  • Phone: +86 13048907387

For customers in the UK and EU, please refer to the following authorized representatives:

  • UK Representative (APEX CE SPECIALISTS LIMITED):
    Address: 6f East Union Street, Manchester, England, M16 9AE
    Contact: Wells Yan
    Tel: +441616371080
    E-Mail: info@apex-ce.com
  • EC Representative (Apex CE Specialists GmbH):
    Address: Grafenberger Allee 277, 40237 Düsseldorf, DE
    Contact: Wells Yan
    Tel: +4921312066043
    E-Mail: info@apex-ce.de

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.