JASIC WSME-200 E201II

Contents

JASIC WSME-200 E201II Pulse AC DC TIG Welder User Manual

Model: WSME-200 E201II | Brand: JASIC

1. Safety Information

WARNING: Welding operations can be hazardous. Always follow safety precautions to prevent injury or death.

  • Always wear appropriate Personal Protective Equipment (PPE), including a welding helmet with proper shade, flame-resistant clothing, welding gloves, and safety shoes.
  • Ensure adequate ventilation to remove welding fumes and gases. Work in a well-ventilated area or use local exhaust ventilation.
  • Protect bystanders from arc flash and hot metal. Use welding screens or barriers.
  • Ensure proper grounding of the welding machine and workpiece to prevent electric shock.
  • Inspect all cables, connections, and equipment for damage before each use. Do not use damaged equipment.
  • Keep flammable materials away from the welding area.
  • Do not weld on containers that have held flammable substances.
  • Be aware of hot metal and slag. Allow welded parts to cool before handling.
  • Read and understand the entire manual before operating the welder.

2. Product Overview

The JASIC WSME-200 E201II is a versatile and high-performance Pulse AC/DC TIG Welder designed for precision metal fabrication. It is suitable for a wide range of applications, from DIY projects to demanding industrial environments. This machine excels in welding stainless steel, aluminum, copper, and other non-ferrous or alloy metals, delivering exceptional arc stability, deep penetration, and spatter-free welds.

Key features include advanced pulse TIG technology, dual AC/DC capability, adjustable pulse frequency, background current, peak current, and AC balance for fine control, especially on thin-sheet welding and heat-sensitive materials. It incorporates a robust IGBT inverter design, efficient air-cooling, and built-in overheat and over-current protection for reliability. The compact and lightweight design, along with an ergonomic handle, ensures portability and flexibility for various job sites.

Front view of the JASIC WSME-200 E201II TIG Welder
Figure 1: Front view of the JASIC WSME-200 E201II TIG Welder.
Promotional image highlighting TIG Welding, Pulse AC/DC, MMA Welding, and IGBT Module features
Figure 2: Key features of the WSME-200 E201II, including TIG, Pulse AC/DC, MMA, and IGBT technology.

3. Package Contents

Upon unpacking, ensure all items listed below are present and undamaged. If any items are missing or damaged, contact your supplier immediately.

  • JASIC WSME-200 E201II Welding Machine
  • TIG Torch (likely WP-26 or similar)
  • Ground Clamp with Cable
  • Electrode Holder with Cable (for MMA welding)
  • Gas Hose
  • User Manual (this document)
  • Consumables (e.g., collets, collet bodies, ceramic nozzles, tungsten electrodes - specific types may vary)
JASIC WSME-200 E201II TIG Welder with included accessories and user manual
Figure 3: The welding machine and typical included accessories.

4. Specifications

Feature Description
Model WSME-200 E201II
Welding Process AC/DC TIG (GTAW), Pulse TIG, MMA (Stick)
Input Voltage Typically 220V/230V Single Phase (check product label for exact range)
Output Current Range Approx. 10-200 Amps (for TIG and MMA)
Duty Cycle High (e.g., 60% at 200A, check product label)
Material Compatibility Stainless Steel, Aluminum, Copper, Alloy Metals
Cooling Air-cooled
Technology IGBT Inverter
Weight Under 18 kg (approx. 39.7 lbs)
Dimensions Compact design (refer to product images for visual scale)
Safety Standards CE, RoHS, ISO compliant

5. Setup

5.1 Initial Inspection

Before connecting the machine, visually inspect it for any signs of damage during transit. Ensure all connections are clean and free from debris.

5.2 Power Connection

  • Connect the welder to a suitable power supply as indicated on the machine's rating plate (e.g., 220V/230V single phase).
  • Ensure the power outlet is properly grounded and capable of handling the welder's current requirements.
  • Use a dedicated circuit if possible to avoid overloading.

5.3 Gas Connection (for TIG Welding)

  • Connect one end of the gas hose to the gas inlet on the rear of the welding machine.
  • Connect the other end of the gas hose to your inert gas cylinder (typically pure Argon or Argon-Helium mix) via a gas regulator.
  • Ensure all gas connections are tight to prevent leaks. Open the cylinder valve slowly and set the gas flow rate on the regulator (e.g., 10-15 L/min for TIG).

5.4 Torch and Ground Clamp Connection

  • TIG Torch Connection:
    • Connect the TIG torch power cable to the appropriate terminal on the front panel (usually marked with a negative (-) symbol for DC TIG, or either for AC TIG depending on setup).
    • Connect the gas line from the TIG torch to the gas output on the machine.
    • If using a foot pedal or remote control, connect it to the designated receptacle.
  • Ground Clamp Connection:
    • Connect the ground clamp cable to the remaining terminal on the front panel (usually positive (+) for DC TIG, or the opposite of the torch for AC TIG).
    • Securely attach the ground clamp to the workpiece or welding table, ensuring good electrical contact.
  • MMA (Stick) Welding Connection:
    • Connect the electrode holder cable to the positive (+) terminal.
    • Connect the ground clamp cable to the negative (-) terminal.
Close-up of the control panel for the JASIC WSME-200 E201II TIG Welder
Figure 4: Control panel with various connections and settings.

6. Operating Instructions

6.1 Control Panel Overview

The control panel (Figure 4) features a digital display and various knobs and buttons for setting welding parameters. Familiarize yourself with:

  • Mode Selection: TIG (DC, AC, Pulse), MMA.
  • Current Adjustment: Main welding current.
  • Pulse Settings (for Pulse TIG): Pulse frequency, peak current, base current, pulse width.
  • AC Balance (for AC TIG): Adjusts cleaning action vs. penetration for aluminum welding.
  • Gas Pre/Post Flow: Time for gas to flow before/after arc.
  • Slope Up/Down: Time for current to ramp up/down.

6.2 TIG Welding (GTAW)

TIG welding provides precise control and high-quality welds, especially on thin materials and exotic metals.

  • DC TIG (for Stainless Steel, Copper, etc.):
    • Select DC TIG mode.
    • Set welding current based on material thickness and joint type.
    • Use a sharpened tungsten electrode (e.g., 2% Lanthanated).
    • Ensure proper gas flow (Argon).
    • Initiate arc (HF start or lift arc) and maintain a consistent arc length and travel speed.
  • AC TIG (for Aluminum, Magnesium):
    • Select AC TIG mode.
    • Set welding current and AC balance. Higher AC balance provides more cleaning action, lower provides more penetration.
    • Use a balled or pointed pure tungsten or Zirconiated tungsten electrode.
    • Ensure proper gas flow (Argon).
    • The AC current helps break up the aluminum oxide layer.
  • Pulse TIG:
    • Select Pulse TIG mode (available for both AC and DC).
    • Adjust pulse frequency, peak current, and base current to control heat input and puddle solidification.
    • Pulse TIG is ideal for thin materials, reducing distortion and improving bead appearance.
Welder performing TIG welding on a metal workpiece
Figure 5: TIG welding in progress, demonstrating precision.
Example of a clean TIG weld bead
Figure 6: A well-executed TIG weld bead.
Example of an aluminum TIG weld
Figure 7: Example of a TIG weld on aluminum.

6.3 MMA (Stick) Welding

MMA welding is suitable for thicker materials and outdoor use where gas shielding is difficult.

  • Select MMA mode.
  • Connect electrode holder and ground clamp as described in Setup.
  • Select the appropriate electrode type and diameter for your material.
  • Set welding current according to electrode manufacturer's recommendations.
  • Strike the arc by lightly touching and then quickly lifting the electrode from the workpiece.
  • Maintain a consistent arc length and travel speed.
Example of an MMA (Stick) weld bead
Figure 8: An example of an MMA (Stick) weld.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your welding machine.

  • Cleaning:
    • Periodically clean the inside of the machine using dry, compressed air to remove dust and metal particles. Ensure the power is disconnected before cleaning.
    • Wipe down the exterior with a clean, dry cloth. Do not use solvents or abrasive cleaners.
  • Cable and Connection Inspection:
    • Regularly inspect all welding cables, torch, and ground clamp for cuts, cracks, or loose connections. Replace damaged components immediately.
    • Ensure gas hose connections are secure and free from leaks.
  • Consumables:
    • Inspect and replace TIG torch consumables (collets, collet bodies, ceramic nozzles, tungsten electrodes) as needed.
    • Ensure proper tungsten preparation (sharpening for DC TIG, balled for AC TIG).

8. Troubleshooting

This section provides solutions to common issues. For problems not listed or if issues persist, contact qualified service personnel.

Problem Possible Cause Solution
No Arc / Weak Arc Poor ground connection, incorrect current setting, faulty torch, power supply issue. Check ground clamp, adjust current, inspect torch, verify power input.
Porosity in Weld Insufficient gas shielding, gas leak, contaminated workpiece, incorrect gas flow. Check gas cylinder, regulator, hose for leaks; clean workpiece; adjust gas flow.
Overheating / Thermal Overload Exceeding duty cycle, blocked ventilation, high ambient temperature. Allow machine to cool down, ensure clear ventilation, reduce welding time.
Unstable Arc (AC TIG) Incorrect AC balance, contaminated tungsten, improper tungsten preparation. Adjust AC balance, replace/re-prepare tungsten.

9. Warranty and Support

The JASIC WSME-200 E201II is backed by a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions, including warranty period and coverage details.

For technical support, service, or spare parts, please contact your authorized JASIC dealer or the manufacturer's customer service department. Ensure you have your product model and serial number available when contacting support.

© 2024 JASIC. All rights reserved.

This manual is subject to change without notice.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.