DH Beauty 210 LEDs Red Infrared Light Therapy Pad

Contents

DH Beauty 210 LEDs Red Infrared Light Therapy Pad User Manual

Your Guide to Effective Red Light Therapy

1. Introduction

This red light therapy pad is designed to target pain relief, speed up recovery, and enhance overall wellness. Adopting dual-spectrum technology (660nm red light + 850nm near-infrared light), it penetrates different skin layers to deliver all-round therapeutic effects. Whether you suffer from muscle soreness, joint pain, or need post-workout recovery, this pad is your go-to solution.

Red light therapy pad with controller and power adapter, user applying it to leg.
Figure 1: Red Light Therapy Pad in use with controller and power adapter.

2. Safety Information & Product Declaration

  • This product cannot be used as a direct substitute for any medicine, and it is not used to diagnose, alleviate, treat, cure or prevent any disease.
  • This product has higher power. When using with a mobile power supply, it is recommended to use a 12V 2A power bank.
  • The therapy belt features irradiance of higher than 130mw/cm², with 0 EMF output.
  • Always ensure the pad is positioned comfortably and securely on the target area.

3. Product Overview

3.1 Components

  • Red Infrared Light Therapy Pad
  • Multi-Functional Controller
  • Power Adapter
  • Adjustable Straps (for securing the pad)
Red light therapy pad, controller, power cable, and an EU plug.
Figure 2: Product components including the pad, controller, power cable, and EU plug.

3.2 Key Features

  • Dual-spectrum Technology: Combines 660nm visible red light and 850nm invisible near-infrared light for deeper penetration and comprehensive therapy.
  • High Power: Equipped with 210 LED beads (3 chips per bead), delivering up to 22W power for stronger therapeutic effects.
  • Large Coverage Area: Measures 31.5"x14" (80cmx35cm), fully covering the entire back for widespread therapy.
  • Multi-Functional Controller: Allows adjustment of 5 brightness levels (P1-P5), 3 lighting modes (Constant light, 10Hz Pulse, 40Hz Pulse), and timer settings (10-90 minutes).
  • Premium & Skin-Friendly Materials: Sweat-proof, easy-to-clean surface, and soft fabric ensure comfort during use.
Diagram explaining 660nm visible red light and 850nm invisible near-infrared light penetration into skin layers.
Figure 3: Explanation of Red Light (660nm) and Near-Infrared Light (850nm) penetration.

3.3 Specifications

AttributeValue
Brand NameDH Beauty
Type210 LEDs Red Infrared Light Therapy Pad
LED Bead Count210pcs (3 chips per bead)
Wavelengths660nm (Red Light), 850nm (Near-Infrared Light)
Max Power OutputUp to 22W
Coverage Area Dimensions31.5" x 14" (80cm x 35cm)
MaterialPlastic, Skin-friendly fabric
Power SourceElectric (EU, UK, US plug options available)
CertificationCE
Manufacturing ProcessMachine Made
OriginMainland China
Package Dimensions39cm (L) x 28cm (W) x 10cm (H)
Package Weight0.813 kg
Image showing the product size (31.5 inches / 80cm length, 14 inches / 35cm width) and the strap size.
Figure 4: Product and strap dimensions.

4. Setup

  1. Connect Controller: Plug the multi-functional controller cable into the therapy pad.
  2. Connect Power Adapter: Plug the power adapter into the controller.
  3. Power Source: Connect the power adapter to a suitable electrical outlet (110V or 220V depending on your region and plug type). If using a mobile power supply, ensure it is a 12V 2A power bank for optimal performance.
  4. Position Pad: Place the therapy pad on the desired body area (e.g., back, knee, shoulder). Use the adjustable straps to comfortably secure the pad in place if needed.
Diagram showing pad dimensions and various application areas on the body.
Figure 5: Various application areas for the therapy pad.

5. Operating Instructions

The multi-functional controller allows for easy customization of your therapy session.

Controller diagram with instructions for Power On/Off, 10Hz/40Hz pulse mode, Red Light Energy (P1-P5), and Time Setting (10-90min).
Figure 6: How to use the Red Light Therapy Controller.
  1. Power On/Off: Long press the ON/OFF button to turn the device on or off.
  2. Adjust Brightness (Energy Levels): Use the PWM + and PWM - buttons to cycle through 5 brightness levels (P1 to P5). P1 is the lowest intensity (approx. 13W), and P5 is the highest (approx. 29W).
  3. Select Lighting Mode: Gently press the ON/OFF button (short press) to switch between lighting modes:
    • Constant Light Mode: Activates continuous 660nm + 850nm light.
    • 10Hz Pulse Mode: Light flashes 10 times per second for gentle therapy.
    • 40Hz Pulse Mode: Light flashes 40 times per second for more intensive therapy.
  4. Set Timer: Use the TIME + and TIME - buttons to set the usage duration from 10 to 90 minutes, in 10-minute increments. The device will automatically shut off after the set time.
Image showing various therapy modes: Constant Light, 10Hz Pulse, 40Hz Pulse, with a woman and dog using the pad.
Figure 7: Various Therapy Modes and recommended usage.

6. Maintenance

  • Cleaning: The pad features sweat-proof and easy-to-clean materials. Wipe the surface with a soft, damp cloth. Do not immerse the pad or controller in water.
  • Storage: Store the device in a cool, dry place away from direct sunlight when not in use.
  • Handling: Avoid bending the pad excessively or placing heavy objects on it to prevent damage to the LED beads or internal wiring.
Image showing material features: Sweat-proof & easy to clean, Attach to fabric for fixing, Timing Setting, Skin-friendly fabric.
Figure 8: Premium materials and features for easy maintenance.

7. Troubleshooting

If you encounter any issues with your device, please consider the following:

  • Device not turning on: Ensure all cables are securely connected and the power adapter is plugged into a working outlet. If using a power bank, verify it meets the 12V 2A specification and is adequately charged.
  • Lights not illuminating: Check the brightness setting (P1-P5) on the controller. Increase the brightness if it's set too low.
  • Inconsistent operation: Disconnect and reconnect all components, then try operating the device again.

8. User Tips

  • For optimal results, consistent use is recommended. Many users report pain relief and faster wound healing within 1-2 weeks, with health improvements seen in 1-2 months.
  • The Constant Light Mode is often recommended for sessions of 20-30 minutes.
  • The lightweight and skin-friendly design makes it suitable for use at home, in the office, or while traveling.
  • The product is well-packaged and generally works as expected, providing a satisfactory user experience.
Woman lying on a mat with the pad on her back, and another woman sitting with the pad on her feet. Illustrates wider range of applications.
Figure 9: Full body treatment and wider range of applications.

9. Warranty & Support

For any questions, concerns, or support regarding your DH Beauty 210 LEDs Red Infrared Light Therapy Pad, please refer to the seller's contact information or the platform's customer service. A user manual in PDF format is also available for download: User Manual (PDF).

© 2024 DH Beauty. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.