1. Product Overview
The XINYI Sini Audio XY-C100L is a high-performance Bluetooth 5.0 HiFi digital power amplifier board. It delivers a powerful 100W+100W stereo output with low distortion and high-definition sound quality. This versatile board supports USB audio, AUX input, U disk playback, and mobile app control, making it an excellent choice for DIY audio projects, speaker upgrades, and compact audio systems.
2. Key Features
- 100W+100W Stereo Output: Delivers powerful, clear audio for speakers and subwoofers, suitable for home audio and DIY projects.
- Bluetooth 5.0 Connectivity: Provides stable, low-latency wireless streaming from smartphones, tablets, and laptops.
- USB Audio Function: Acts as a USB sound card, enabling high-quality audio playback from computers.
- App Control: Supports mobile app control for convenient operation, including volume adjustment and input selection.
- HiFi Sound Quality: Features low-distortion circuitry for high-definition audio reproduction.
- Easy Tuning: Front-panel volume knob allows precise adjustment of output level with 360-degree stepless tuning.
- Compact Design: Small form factor makes it easy to integrate into custom audio setups.
- Independent Bass/Treble Adjustment: Allows for fine-tuning of sound output for left and right channels, and independent adjustment of heavy bass.
- Protection Mechanisms: Includes power reverse connection protection, short circuit protection, and self-recovery overheating protection.
3. Specifications
| Item | Specification |
|---|---|
| Model | XY-C100L |
| Output Power | 100W + 100W (stereo) |
| Bluetooth Version | 5.0 |
| Inputs | USB Audio, AUX IN, Bluetooth 5.0, U Disk |
| Power Supply | DC 5-26V (recommended DC 12-24V) |
| Control | App control, front-panel volume knob |
| Features | HiFi sound quality, low distortion, easy tuning, independent high/bass adjustment |
| Number of Channels | Left and right dual channels (stereo) |
| Applicable Horn Impedance | 4-8 Ohms, 30-300W |
| Chip Solution | Class-D power amplifier chip |
| Transmission Distance | 15m (no shielding) |
| Volume Adjustment | Encoder 360 degrees stepless tuning |
| Audio Output | Passive speaker + 3.5mm (for active speakers) |
| Output Filter | Filter free |
| Heat Dissipation | Heat sink + shell |
| Dimensions (with shell) | 58mm x 53mm x 18mm (2.2in x 2.1in x 0.7in) |
| Weight | 70g |
Power Output by Voltage and Impedance:
- 12V: 8 Ohm: 12W + 12W, 4 Ohm: 22W + 22W
- 19V: 8 Ohm: 28W + 28W, 4 Ohm: 55W + 55W
- 22V: 8 Ohm: 37W + 37W, 4 Ohm: 72W + 72W
- 24V: 8 Ohm: 51W + 51W, 4 Ohm: 100W + 100W
4. Installation & Connection
4.1. Assembly (for DIY kit)
If you received the DIY kit version, the outer casing needs to be assembled. A screwdriver is provided for this purpose. Ensure the heat sink tape (3M glue) is pasted to the chip before assembly. The hotter the chip gets, the stickier the thermal conductivity will be.


4.2. Power Connection
Connect a DC 12-24V power supply to the DC 12-24V input terminals. Ensure the polarity is correct (positive to positive, negative to negative). The power supply should be DC 8-26V, 3A or above. A 12V/24V standard power adapter with a current output of more than 2A is recommended.
Caution: The power supply voltage should not exceed 26V, as this will burn the circuit board. The output power of the power supply should be greater than the output power of the amplifier to avoid affecting sound quality.
4.3. Speaker Connection
Connect the left and right speaker terminals to your passive speakers. Observe polarity markings to ensure correct phasing. Ensure the speaker impedance is compatible with the amplifier board (typically 4-8Ω).
For active speakers, connect them to the 3.5mm Audio Output jack.

4.4. Audio Inputs
- USB Audio: Connect the USB port to a computer. The board will be recognized as a USB sound card, enabling high-quality audio playback.
- AUX IN: Use a 3.5mm audio cable to connect external audio sources (e.g., phone, CD player). For best results, use a shielded cable to reduce noise.
- U Disk Playback: Insert a USB flash drive into the USB port. The file system must be FAT32, and the maximum supported size is 32GB. The sampling rate should not exceed 44100Hz.
- Bluetooth: Enable Bluetooth pairing mode on your device and connect for wireless streaming.
5. Operation Instructions
5.1. Basic Operation
- Connect the power supply, speakers, and audio inputs as described in the "Installation & Connection" section.
- Turn on the power supply. The board will initialize and enter standby mode.
- Select your desired input source (USB, AUX, or Bluetooth) via the mobile app or control buttons.
- Adjust the volume using the front-panel knob or the mobile app.
- Play audio from your source device; the board will amplify the signal and output to the speakers.
- When finished, turn off the power supply first, then disconnect all connections.
The power switch on the board is a standby switch. After the switch is off, the machine is in a low power consumption standby state. For complete power off or long-term storage, unplug the DC power plug.
5.2. Bluetooth Pairing
When the Bluetooth board is powered on, the blue LED will flash quickly, indicating it has entered Bluetooth connection mode. Search for "XinYi" on your mobile phone's Bluetooth settings and click to complete the connection. Once connected, the blue LED will enter a long light state. Open your mobile phone to play music, and the blue LED will flash slowly, indicating playback.

5.3. App Control
Download the dedicated mobile app "Sinilink" from the official website or app store (e.g., Google Market). Connect the app to the amplifier board via Bluetooth. Use the app to adjust volume, switch inputs, and access additional settings.
Important: When using the app, you must turn on all app permissions in your phone settings, especially location information, to avoid compatibility issues and Bluetooth connection failures.


Note: Do not connect to "Sinilink-APP" directly from your phone's Bluetooth settings. If it is connected, please unpair and search again through the dedicated app.
6. Safety & Maintenance
- Power Safety: Use only a DC 12-24V power supply. Do not exceed the recommended voltage.
- Heat Management: Ensure the board is installed in a well-ventilated area to prevent overheating. The use of special thermal silica gel paste and a large area heat sink, close to the shell of copper heat dissipation, doubles the heat dissipation area to ensure full power and high performance operation.
- Connection Safety: Double-check all connections before powering on to avoid short circuits.
- Cleaning: Use a dry, soft cloth to wipe the board. Do not use liquid cleaners or aerosols directly on the unit.
7. Troubleshooting
If you notice unusual noise, no output, or connectivity issues, check all connections and restart the board. Contact technical support if problems persist.
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound output | Loose connections, incorrect power supply | Check all cables, ensure the power supply is within 12-24V |
| Bluetooth pairing failure | Device out of range, Bluetooth disabled | Move closer, enable Bluetooth on your device |
| Distorted audio | Overloaded input, incorrect speaker impedance | Reduce input level, use speakers with 4-8Ω impedance |
| USB recognition issues | Faulty USB cable, missing drivers | Replace the USB cable, install the required drivers (if any) |
Additional Precautions:
- Audio Input Mode Switch: The default input is Bluetooth. If no external audio device is connected, the power-on default is Bluetooth. If AUX or U disk is connected, it prioritizes those inputs. If USB audio is connected, it immediately switches to AUX. The input mode can also be switched via the mobile app.
- U Disk File System: Must be FAT32, maximum support 32GB. High sampling rates (above 44100Hz) may cause playback failure.
- USB Sound Card: When using the USB sound card function, you can connect to a computer with a USB data cable without installing any drivers. If the computer switches to its own sound card, manually switch back to the amplifier board.
- Power Supply Considerations: If using an 8 ohm 50W speaker with a 24V power supply, and the current is less than 4A, the sound may be stuck. Reduce the volume or output power to resolve this. If the horn does not play when powered on and ticks, the power supply is insufficient; increase the power supply.
- Speaker Selection: If the power of the speakers is less than 50W, use an appropriate power supply. If the power of the speakers is greater than 50W, the power supply should be greater than the speaker power.
- "Hiccup" Phenomenon: If you experience a "hiccup" phenomenon when playing music, first consider insufficient power supply and a large power supply current. Second, consider the power amplifier's overheating protection; strengthen heat dissipation or reduce playback volume.
- Signal Problem: The product uses a PCB antenna, and the visible distance of the connection can reach 15 meters without obstruction. If you can't find Bluetooth or have signal problems, keep away from routers when using it. Avoid placing on a metal table. If using a metal shell, you must lead out an external antenna.
8. User Tips
- The amplifier board is very compact, often smaller than a cellphone, yet delivers good power when connected to an appropriate voltage source (e.g., 19V).
- While the 100W output might be perceived differently, the sound quality is generally good, making it suitable for PC speakers.
- The volume knob offers a wide adjustment range, allowing for fine-tuning of the audio output.
- For DIY enthusiasts, the assembly process is straightforward, and the kit includes necessary tools like a screwdriver.
9. Packaging Contents
- XY-C100L Digital Power Amplifier Board ×1
- User Manual ×1
- Warranty Card ×1
- DC Adapter (if included in package)
- Heat Sink
- M2 Screws
- M2x14 Copper Pillars
- Knob Cap
- Screwdriver (for DIY kit)

10. Warranty & Support
This product is covered by a manufacturer's warranty against defects in materials and workmanship for a period of 12 months from the date of purchase. For warranty claims, please contact the official customer service center with your purchase receipt and product details.
For additional item guides and documents, you may refer to the official PDF user manual: View User Manual (PDF)