1. Product Overview
The MCHOSE V9 Pro2 is a quad-mode wireless gaming headset designed for PC and other compatible platforms, featuring 7.1 surround sound, a high-quality microphone, and a lightweight design.
Package Contents
- MCHOSE V9 Pro2 Gaming Headset
- User Manual (this document)
- Charging Cable (USB Type-C)
- USB Type-C Adapter
- 2.4G Wireless Receiver (USB Dongle)
2. Setup
2.1. Driver Installation (M HUB Client)
For full functionality and customization, install the M HUB client driver on your PC.
- Open your web browser and navigate to: https://www.maicong.cn
- Click on the [Driver] section.
- Locate and click [Download M HUB Client] to install the software.
Note: The M HUB client driver currently supports Windows 10 or above. Windows 7 and macOS operating systems are not supported at this time.
2.2. 2.4G Wireless Connection
The headset and 2.4G receiver are pre-paired at the factory.
- Insert the 2.4G wireless receiver (USB dongle) into an available USB port on your computer.
- Press and hold the Power Button on the headset for approximately 3 seconds to power it on.
- Double-click the Power Button to switch to 2.4G mode. You will hear a voice prompt: "Adapter mode".
- The headset will automatically connect to the 2.4G receiver. The indicator light on the headset will show a slow green blinking light when connected.
2.4G Re-pairing (if needed)
If the headset loses its 2.4G connection or you need to re-pair:
- In 2.4G mode, press and hold the Power Button and Microphone Button simultaneously until the indicator light flashes white 3 times.
- Insert the USB receiver into your computer. When the receiver's green light stays steady, the re-pairing is successful.
Tip: For manual pairing, keep the headset as close as possible to the receiver.
2.3. Bluetooth Connection
To connect via Bluetooth:
- Press and hold the Power Button for approximately 3 seconds to power on the headset.
- Double-click the Power Button to switch to Bluetooth mode. The indicator light will blink alternately red and blue, indicating it's in pairing mode.
- On your device (phone, tablet, etc.), search for Bluetooth devices and select "MCHOSE V9 Pro" (or "MCHOSE V9" for the standard V9 model).
- Once connected, the indicator light will turn solid blue.
Friendly Reminder: If the headset disconnects due to exceeding the Bluetooth range, it will automatically reconnect upon returning within range. If no reconnection occurs within 5 minutes, the headset will power off automatically.
Reset Bluetooth to Factory Settings
If you experience issues with Bluetooth pairing, you can reset the headset:
- Ensure the headset is powered off.
- In Bluetooth mode, press and hold the Power Button for 8 seconds until the indicator light flashes white rapidly 3 times. This confirms a successful reset.
- The headset will then be available for pairing again. (If the original device has pairing records, please delete them manually from your device's Bluetooth settings).
2.4. Sound Card Mode (Wired USB)
To use the headset in wired sound card mode:
- With the headset powered on, connect it to your computer via the USB charging cable.
- The headset will automatically switch to Sound Card Mode.
- You can double-press the Power Button to cycle between [Adapter Mode] / [Bluetooth Mode] / [Sound Card Mode] if needed.
3. Operating Instructions
3.1. Headset Controls
| Control | Action | Function |
|---|---|---|
| Power Button | Press and hold for ~3s | Power On/Off |
| Power Button | Double press | Connection Mode Switch (2.4G / Bluetooth / Sound Card Mode) |
| Power Button | Triple press | Game/Music Mode Switch |
| Power Button | Single press | Play/Pause, Answer/End Call |
| Power Button | Press and hold for ~1.5s | Reject Call |
| Microphone Button | Single press | Microphone On/Off |
| Volume Scroll Wheel | Scroll upward | Volume Up |
| Volume Scroll Wheel | Scroll downward | Volume Down |
3.2. Indicator Light Status
| Status | Indicator Light Behavior |
|---|---|
| Bluetooth Pairing Mode | Red & blue lights alternate flashing |
| 2.4G Pairing Mode | Red & green lights alternate flashing |
| Low Battery | Red indicator light flashes slowly |
| Charging | Red light stays steadily lit |
| Fully Charged | Blue light stays steadily lit |
4. Charging and Maintenance
4.1. Charging Your Headset
Connect the headset to a power source using the provided USB Type-C charging cable. You can charge while gaming in 2.4G or Bluetooth mode.
- Low Battery: Red indicator light flashes slowly.
- Charging: Red indicator light stays steadily lit.
- Fully Charged: Blue light stays steadily lit.
4.2. Important Charging Instructions
To ensure the longevity and safety of your headset, please adhere to the following charging guidelines:
- Use only computer USB ports to charge the headset.
- Do not use fast-charging phone adapters to charge the headset.
- Do not use inferior non-standard power adapters to charge the headset.
- Do not use over-voltage or over-current power adapters to charge the headset.
- Keep the headset away from high-temperature devices while charging.
- Turn off the power switch when left unused for an extended period.
These charging instructions apply to all chargeable devices (keyboards/mice/earphones/speakers/etc.).
5. Troubleshooting
- Headset not connecting (2.4G): Try the 2.4G re-pairing procedure described in Section 2.2. Ensure the receiver is properly inserted and the headset is within range.
- Bluetooth connection issues: Reset Bluetooth to factory settings as described in Section 2.3. Remember to delete previous pairing records from your device.
- Headset powers off automatically: If the headset disconnects from Bluetooth and does not reconnect within 5 minutes, it will power off. Re-establish connection or power on again.
- Sound quality issues or unexpected behavior: Ensure the M HUB client driver is installed and up-to-date. Check the software settings for EQ and sound effects.
- Interference with other devices (FCC Statement): This device complies with Part 15 of the FCC Rules. If it causes harmful interference to radio or TV reception, try the following:
- Reorient or relocate the receiving antenna.
- Increase the separation distance between the device and receiver.
- Connect the device to an outlet on a different circuit from the receiver.
- Consult the dealer or an experienced radio/TV technician for assistance.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | MCHOSE |
| Model | V9 Pro2 |
| Department | Unisex-adult |
| Material | ABS |
| Weight | 265g |
| Battery Capacity | 2000mAh |
| Battery life up to | 248 hours |
| Charging Time | 3 hours |
| Voice assistant built-in | No |
| Maximum wireless range | 10m-20m |
| NFC Technology | No |
| Sound Isolating | Yes |
| Category | Earphones & Headphones |
| Earcups Type | Sealed |
| Number Of Drivers | 1 |
| Charging Method | Cable |
| Headphone Pads Material | Memory Foam |
| Magnet Type | Neodymium |
| Impedance Range | Up to 32 Ω |
| Bluetooth Version | Other |
| With Microphone | Yes |
| Is wireless | Yes |
| Support APP | No (M HUB Client is a driver/software, not a mobile app) |
| Audio latency | 15ms |
| Control Method | Push button |
| Waterproof | Yes |
| Electrical | No |
| Line Length | 1.5m |
| Frequency Response Range | 20 - 20000 Hz |
| Plug Type | Line Type |
| Speaker maximum output power | 20mW |
| Active Noise-Cancellation | Yes |
| Volume Control | Yes |
| Control Button | No |
| Vocalism Principle | Dynamic |
| Wireless Type | Bluetooth |
| Connectors | USB |
| Communication | Wireless+Wired |
| Style | Wireless headphone & headset |
| Origin | Mainland China |
| Resistance | 45 Ω |
| FCC ID | 2BERM-MZS |
6.1. Key Features (V9 Pro2 vs. V9 Pro)
| Feature | V9 Pro2 | V9 Pro |
|---|---|---|
| Sound Effects | THX Spatial Audio | 7.1 Virtual Surround Sound |
| Programme | Maicong Self-developed Sky Series Solution | C-Media Audio Solution |
| Calibration | EDG Valorant Pro Team Co-Tuned, FPS Layered Positioning Sound Effects | Esports-level FPS sound effects |
| Speaker unit | 53mm Three-layer High-molecular Composite Diaphragm Unit | 53mm bio-diaphragm unit |
| Cavity | Multi-Dimensional Ripple Acoustic Cavity | Honeycomb Acoustic Cavity |
| mHUB Function | Preset 3 Sound Modes, Cloud Community, Custom EQ Equalizer, Smart Parameter Memory (Support) | EQ adjustment |
6.2. Package Dimensions
- Length: 26 cm
- Width: 23 cm
- Height: 12 cm
- Weight: 0.849 kg
7. User Tips
- Optimal Sound Quality: For maximum sound quality and to utilize all features, ensure the M HUB client software is installed and properly configured.
- Comfort for Gym Use: If you plan to use the headset for workouts, consider purchasing fabric earcups for better comfort and breathability.
- Extended Battery Life: The headset offers excellent battery life. Monitor the battery level via the M HUB app (if available) or the indicator light.
- Wide Wireless Range: The 2.4G wireless connection provides a significant range, allowing you freedom of movement away from your PC.
- High-Quality Microphone: The omnidirectional AI noise-reduction microphone offers clear voice pickup, making it suitable for communication during gaming or calls.
- Positional Audio in Games: Leverage the FPS 7.1 surround sound effects to enhance positional audio, giving you a competitive edge in games by hearing opponents' movements clearly.
- Automatic Standby: Check the M HUB software for options to configure or disable automatic standby time to suit your usage patterns.
8. Warranty and Support
For further assistance, driver updates, or detailed product information, please visit the official MCHOSE website: https://www.maicong.cn
A digital version of this user manual is available in PDF format: User Manual (PDF)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.