1. Introduction
This manual provides instructions for setting up, operating, and maintaining your Custom Dactyl Manuform Split Keyboard. This ergonomic, hot-swappable, dual-mode (wired/wireless Bluetooth) mechanical keyboard is designed for comfort and customization.
Important Notes:
- This keyboard kit is a customized product.
- The shell is made by 3D printing, so minor layering and cosmetic imperfections are normal and within quality control standards.
- Keyboard assembly experience is recommended. If you are new to keyboard assembly, proceed with caution.
2. Package Contents
Please check the package for the following items:
- Left Keyboard Half
- Right Keyboard Half
- USB-C to USB-A Cable (1.5 meters)
- Adhesive Feet (if not pre-applied)
- (Switches and Keycaps are NOT included and must be purchased separately)

Figure 2.1: Package Contents (Switches and keycaps not shown)
3. Setup and Assembly
- Install Switches: This keyboard supports hot-swappable switches. Carefully align the pins of each mechanical switch with the sockets on the PCB and press firmly until the switch clicks into place. Repeat for all key positions on both keyboard halves.
- Install Keycaps: Once all switches are installed, press the desired keycaps onto the stems of the switches.
- Attach Feet: If adhesive feet are provided separately, attach them to the bottom of each keyboard half to prevent slipping.
- Power On: Locate the power switch on the side of each keyboard half (typically near the USB-C port). Slide the switch to the 'ON' position.
- Initial Charge: Connect the provided USB-C cable to the USB-C port on the left keyboard half and the other end to a computer or USB power adapter. The keyboard contains a 2500mAh rechargeable lithium battery.

Figure 3.1: USB-C Port and Power Switch Location
4. Operating Instructions
4.1. Bluetooth Connection
- Ensure both keyboard halves are powered on.
- On your computer or device, navigate to Bluetooth settings.
- Search for new devices. The keyboard should appear as "Dactyl Manuform" or similar.
- Select the keyboard to pair. The LEDs on the keyboard will indicate the connection status.
4.2. Wired Connection
For wired operation, connect the USB-C cable from the left keyboard half to your computer. The left side acts as the main keyboard. The right side will still connect to the left via Bluetooth, so both halves need to be powered on for full functionality.
4.3. LED Indicators
The keyboard features three LEDs to provide status information:
- Uppercase Status: Indicates when Caps Lock is active.
- Fn Layer 1: Indicates when the Function layer is active.
- Num Layer 2: Indicates when the Numeric layer is active, allowing for numeric keypad input.
Battery Level Indication (at startup):
- Green LED: Fully charged
- Yellow LED: Medium power consumption
- Red LED: Low battery
The right-hand keyboard half also has a dual-color LED to indicate low battery and Bluetooth connection status.
4.4. Keyboard Layers
The keyboard utilizes multiple layers for extended functionality. It comes with default layouts for the base, Function (Fn), and Numeric (Num) layers. You can switch between these layers using designated keys (e.g., an 'Fn' key).
4.5. Customizing Key Functions (ZMK Studio)
This keyboard supports ZMK Studio for direct key remapping and customization. You can access ZMK Studio via a desktop webpage, eliminating the need for complex configuration files.

Figure 4.1: ZMK Studio - Fn Layer Example

Figure 4.2: ZMK Studio - Num Layer Example
5. Maintenance
5.1. Cleaning
- To clean the keyboard, power it off and disconnect any cables.
- Use a soft, lint-free cloth lightly dampened with water or a mild electronics cleaner.
- Avoid spraying liquids directly onto the keyboard.
- For deeper cleaning, keycaps can be removed (using a keycap puller) and washed with mild soap and water. Ensure they are completely dry before reattaching.
5.2. Battery Care
- Avoid fully discharging the battery frequently.
- Store the keyboard in a cool, dry place if not used for extended periods.
- Do not expose the battery to extreme temperatures.
6. Troubleshooting
- Keyboard not responding:
- Ensure both halves are powered on.
- Check battery level.
- For Bluetooth, ensure it's paired and within range. Try re-pairing.
- For wired, ensure the USB-C cable is securely connected to the left half and the computer.
- Specific keys not working:
- Power off the keyboard.
- Carefully remove the keycap and then the switch for the problematic key.
- Inspect the switch pins for bends. Straighten if necessary.
- Reinsert the switch firmly into the socket.
- Bluetooth connection unstable:
- Ensure no other devices are causing interference.
- Move closer to the connected device.
- Try re-pairing the keyboard.
- Battery not charging:
- Ensure the USB-C cable is fully inserted into the left keyboard half and the power source.
- Try a different USB port or power adapter.
- Ensure the power source provides sufficient power.
7. Specifications
| Feature | Description |
|---|---|
| Keyboard Type | Split Ergonomic Mechanical Keyboard |
| Key Count | 61-key or 86-key variants |
| Operation Style | Mechanical |
| Switch Compatibility | Hot-swappable |
| Connectivity | Dual-mode (Wireless Bluetooth, Wired USB-C) |
| Backlight | No backlight |
| Battery | 2500mAh Rechargeable Lithium Battery |
| Tilt Angle | 22° |
| Customization | ZMK Studio support |
| Language | English layout (default) |
| Application | Desktop |
| Package Dimensions | Approx. 20cm (L) x 10cm (W) x 5cm (H) |
| Package Weight | Approx. 1.0 kg |
| Origin | Mainland China |
8. User Tips
- Embrace the Ergonomics: The unique split and curved design is intended to reduce strain. Give yourself time to adjust to the new hand positions for maximum comfort.
- Utilize Indicator Lights: Pay attention to the LED indicators for Caps Lock, Fn layer, Num layer, and battery status to enhance your typing experience.
- Customize Your Layout: The ZMK Studio offers powerful customization. Experiment with different key assignments, especially for modifier keys and the space key (often found on thumb clusters in ergonomic layouts), to find what works best for your workflow.
9. Warranty and Support
This product is a custom-made keyboard kit. Technical support is limited and can only provide guidance within the manufacturer's capabilities. Please refer to the seller for specific warranty terms, if any. For further assistance, contact your point of purchase.