SEMBO BLOCK Metal Cardbot 2

Contents

SEMBO Metal Cardbot 2 Building Block Figure Instruction Manual

Model: Metal Cardbot 2 (No. 900042)

1. Introduction

Thank you for purchasing the SEMBO Metal Cardbot 2 Building Block Figure. This manual provides essential information for the safe assembly, use, and maintenance of your new collectible toy. These building blocks are designed to enhance creative thinking, cognitive flexibility, and imagination development.

Please read all instructions carefully before beginning assembly.

2. Safety & Warnings

  • WARNING: Not suitable for children under 36 months.
  • This product contains small parts which may pose a choking hazard. Keep away from young children.
  • Do not swallow any parts.
  • Ensure all parts are securely connected during assembly and play to prevent detachment and potential hazards.
  • This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Read all instructions before use to ensure safety and prevent damage.

3. Product Information & Specifications

General Product Details
AttributeDetail
Product NameBuilding Blocks (Metal Cardbot 2 Figure)
Model NumberNo. 900042
Batch NumberA0001
MaterialABS Plastic
Block SizeSmall building block (Compatible with Lego)
Is ElectricNo Battery
CertificationCE
GenderUnisex
Recommended Age14+ years, 18+ years
OriginMainland China
TypeCreative Thinking, Cognitive Flexibility, Imagination Development

Dimensions

  • Product Size (assembled figure): Approximately 50 x 25 x 60 mm (Height varies slightly between models, e.g., 6cm for regular, 7cm for hidden edition).
  • Packaging Size (single blind box): 72 x 45 x 105 mm
  • Display Box Size (for multiple units): 222 x 141 x 108 mm

Each set typically includes: 1 main body, 1 weapon, 1 character card, and 1 instruction book.

Product information table showing dimensions and contents

Product information table with dimensions and contents.

Contents per set: main body, weapon, character card, instruction book

Typical contents included in each set.

4. Assembly Instructions (Setup)

Your Metal Cardbot figure comes as a building block kit. Follow these general steps for assembly:

  1. Preparation: Open all parts bags of building blocks. Carefully lay out all pieces on a clean, flat surface.
  2. Follow the Instruction Book: Refer to the specific instruction book included in your package for the detailed, step-by-step assembly order of your particular Metal Cardbot figure. Each figure has a unique design and assembly sequence.
  3. Connect Pieces Securely: Ensure each block is firmly connected to the next. A snug fit is important for the stability of the assembled figure.
  4. Attach Accessories: Once the main body is assembled, attach any weapons or additional accessories as indicated in the instruction book.

Figure Features & Articulation

The Metal Cardbot figures are designed with multiple points of articulation for dynamic posing:

  • Multi-angle shoulder joints for varied arm positions.
  • Rotatable wrists for weapon manipulation.
  • Enhanced foot grip for stable standing poses.
  • 360-degree waist rotation for flexible body movement.
Blue Cop figure demonstrating articulated joints: shoulder, wrist, foot, and waist rotation

Example of figure articulation points for dynamic posing.

Product Showcase Video

Watch this video for a dynamic showcase of the Metal Cardbot figures and their features:

Video showcasing various Metal Cardbot figures in action.

Explore the different Metal Cardbot figures available:

Detailed view of the Blue Cop figure
Blue Cop
Detailed view of the Phoenix Flame figure
Phoenix Flame
Detailed view of the Mega Ambler figure
Mega Ambler
Detailed view of the Deep Sea Overlord figure
Deep Sea Overlord
Detailed view of the Flame Dragon God of War figure
Flame Dragon God of War
Detailed view of the Star Interstellar Ranger figure
Star Interstellar Ranger
Detailed view of the Explosive Rock figure
Explosive Rock
Detailed view of the Heavy Iron figure
Heavy Iron
Detailed view of the Blue Lightning 5 figure
Blue Lightning 5
Detailed view of the Steel Power figure
Steel Power
Detailed view of the Blue Lightning 5 Gold Edition figure
Blue Lightning 5 (Gold Edition)
Detailed view of the Buffalo Crush figure
Buffalo Crush

5. Operating Instructions

Once assembled, your Metal Cardbot figure is ready for play or display:

  • Posing: Utilize the articulated joints (shoulders, wrists, waist, etc.) to create various dynamic poses for your figure.
  • Interchangeable Parts: Some figures may have interchangeable weapons or armor. Refer to your specific figure's instruction book for details on how to safely swap these parts.
  • Display: The figures are designed to be stable for display on shelves, desks, or in dioramas.

6. Maintenance

  • Cleaning: To clean your figure, gently wipe it with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Do not use harsh chemicals or abrasive cleaners.
  • Storage: Store the figure in a cool, dry place away from direct sunlight and extreme temperatures to prevent material degradation or discoloration.
  • Handling: Handle the figure with care to avoid accidental drops or impacts that could damage the plastic components.

7. Troubleshooting

Missing Parts

If any parts are found missing after receiving your package, please contact the manufacturer or seller immediately for assistance. Provide your order details and a description of the missing parts.

8. User Tips

  • Organize Parts: Before starting assembly, sort the building blocks by color, size, or type to make the process smoother.
  • Double-Check Connections: Ensure all connections are firm to prevent the figure from falling apart during play or display.
  • Creative Play: Encourage imaginative play by creating unique scenarios and stories for your Metal Cardbot figures.

9. Manufacturer & Support

Manufacturer Information

  • Manufacturer: Shenqiu Moran Trading Co., Ltd
  • Address: No. 232, 2nd floor, Shangyi 12, Huaidian Hui Town, Shenqiu County, Zhoukou City, Henan Province
  • Email: 260330370@qq.com

EU Representative Information

  • Name of Responsible Person: Sophie Dupont
  • Address: 8 bis rue Abel75012 Paris, France
  • Phone Number: 33-0780843245
  • Email: SophieDupont@proconseilfr.com

Additional Resources

A user manual in PDF format is also available for download:

View User Manual (PDF)

© 2024 SEMBO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.