XINYI Sini Audio C50L/C100L

Contents

XINYI Sini Audio C50L/C100L Stereo Bluetooth Digital Power Amplifier Board User Manual

Models: C50L, C100L | Brand: XINYI Sini Audio

1. Introduction

Thank you for choosing the XINYI Sini Audio Stereo Bluetooth Digital Power Amplifier Board. This manual provides detailed instructions for the setup, operation, and maintenance of your C50L or C100L amplifier board. These modules offer high-quality stereo audio amplification with versatile input options including Bluetooth 5.0, AUX, U disk, and USB sound card, along with convenient mobile APP control and 360-degree stepless tuning.

Note: This manual covers both C50L and C100L models. Please refer to the specific specifications for your model where indicated.

2. Safety Information

  • Ensure the power supply voltage is within the specified range (DC 8V-26V). Using an incorrect voltage can damage the device.
  • Always connect speakers and audio sources before applying power.
  • Avoid short-circuiting the speaker output terminals.
  • Do not expose the device to moisture or extreme temperatures.
  • Keep out of reach of children.
  • If you are assembling the DIY version, exercise caution with small components and tools.

3. Package Contents

The package typically includes:

  • XINYI Sini Audio C50L/C100L Amplifier Board
  • Heat sink
  • DC adapter (may vary by package)
  • Screwdriver (for DIY casing assembly)
  • Upper and Lower covers (for DIY casing assembly)
  • M2 screws and copper columns (for DIY casing assembly)
  • Knob cap
C50L components in packaging
Image: Typical package contents for the C50L model.

4. Product Overview

The amplifier board features various inputs, outputs, and controls for a comprehensive audio experience.

C50L Wiring Diagram and Controls
Image: C50L model showing DC power input, speaker outputs, 3.5mm audio output, USB audio input, AUX input, and volume/control knob. Note the 'Sinilink' logo.
C100L Wiring Diagram and Controls
Image: C100L model showing DC power input, speaker outputs, 3.5mm audio output, USB audio input, AUX input, and volume/control knob. Note the 'Sinilink' logo.

5. Setup and Assembly

5.1 DIY Casing Assembly (if applicable)

If you have purchased the version with a DIY casing, follow these steps:

  1. Carefully unpack all components.
  2. Attach the heat sink to the main chip on the amplifier board. Ensure the 3M glue on the heat sink tape is properly adhered.
  3. Place the circuit board between the upper and lower covers.
  4. Secure the assembly using the M2 screws and copper columns.
  5. Install the knob cap onto the rotary encoder.
C50L Installation Diagram
Image: Exploded view of C50L installation, showing M2 screws, heat sink, M2x13 copper column, knob cap, upper cover, circuit board, and lower cover.
C100L Installation Diagram
Image: Exploded view of C100L installation, showing M2 screws, heat sink, M2x14 copper pillar, knob cap, upper cover, circuit board, and lower cover.

5.2 Power Connection

  • Connect a DC power supply (8V-26V) to the DC-8-26V input port.
  • A 12V/24V standard power adapter with an output current of more than 2A is recommended.
  • The output power of the power supply should be greater than the output power of the amplifier to ensure optimal sound quality and prevent issues.
C50L with USB drive and power adapter
Image: C50L connected to a power adapter and a USB drive.

5.3 Speaker Connection

  • Passive Speakers: Connect your passive speakers to the SPKL (Left) and SPKR (Right) terminals. Ensure correct polarity (+/-).
  • Active Speakers: Connect active speakers to the 3.5mm audio output jack.
C50L connected to two passive speakers
Image: C50L amplifier board connected to two passive speakers.

5.4 Audio Input Connections

  • AUX Input: Connect an audio source (e.g., smartphone, MP3 player) via a 3.5mm audio cable to the AUX IN jack.
  • U Disk Playback: Insert a USB flash drive (formatted as FAT32, maximum 32GB) into the USB AUDIO port for direct music playback.
  • USB Sound Card Input: Connect the USB AUDIO port to a computer. The system should automatically recognize it as a sound card.

6. Operation

6.1 Basic Controls

  • Rotary Encoder: Turn the knob to adjust the volume.
  • Short Press: Press the knob briefly to play or pause audio playback.
  • Long Press: Press and hold the knob to turn the amplifier board on or off.
Video: Demonstration of sound quality, volume control, and play/pause functionality using the rotary encoder.

6.2 Bluetooth Pairing

  1. Power on the amplifier board. The blue LED will flash quickly, indicating it's in Bluetooth connection mode.
  2. On your mobile device, search for Bluetooth devices and select "XinYi" to connect.
  3. Once connected, the blue LED will enter a long light state.
  4. When playing music, the blue LED will flash slowly.

Important Note: Do not connect to "Sinilink-APP" directly from your phone's Bluetooth settings. If accidentally connected, please unpair and search again. The "Sinilink" connection is for the mobile application.

Bluetooth Connection Steps via Mobile APP
Image: Step-by-step guide for connecting Bluetooth via the mobile APP, highlighting to avoid connecting to "Sinilink-APP" directly from phone settings.

The amplifier board supports control via the Sinilink mobile application, available for both Android and iOS systems.

  1. Download the "Sinilink" app from your device's app store (e.g., Google Market).
  2. Ensure your phone's location information is turned on when using the APP.
  3. Open the app and follow the in-app instructions to connect to your amplifier board.
  4. The app provides visual controls for volume, sound effects, track navigation (up/down song), play/pause, and play mode.
Mobile APP Control Interface
Image: Screenshots of the mobile APP interface, demonstrating visual controls for volume, sound effects, and playback modes.

7. Specifications

C50L Model Specifications
FeatureDescription
Bluetooth Version5.0 (15 meters unobstructed)
Output Channel2.0 channel (Stereo)
Chip ModelAP3050D
Working ModeClass D
Audio InputBluetooth 5.0, AUX, U disk Play
Rated Output Power50W + 50W
Frequency Response20Hz to 20KHz
Working VoltageDC 8V to DC 26V
Recommended Power VoltageDC 19V
Fit Speaker Parameters4-8 ohms
Dimensions (L*W*H)56mm * 50mm * 18mm
Net WeightApprox. 61g
Protection MechanismPower reverse connection, short circuit, self-recovery overheating protection
C50L Product Specifications Table
Image: Detailed specifications for the C50L model, including dimensions and power output vs. voltage.
C100L Model Specifications
FeatureDescription
Bluetooth Version5.0 (15 meters unobstructed)
Number of ChannelsLeft and right dual channels (Stereo)
Chip ModelAP3050D
Working ModeClass D
Audio InputBluetooth 5.0, AUX, USB disk, USB sound card
Audio OutputPassive speaker + 3.5mm
Output Power100W * 2
Applicable Horn4-8 Ohms, 30-300W
Power Supply VoltageDC 5V to DC 26V
Volume AdjustmentEncoder 360 degrees stepless tuning
Output FilterFilter free
Heat Dissipation ModeHeat sink + shell
Protection MechanismPower reverse connection, short circuit, self-recovery overheating protection
Dimensions (with shell)58mm * 53mm * 18mm
Weight70g
C100L Product Specifications Table
Image: Detailed specifications for the C100L model, including dimensions and power output vs. voltage.

8. Troubleshooting

Precautions for Use Text
Image: Text detailing precautions for use, including audio input mode, power options, speaker selection, and signal problems.

8.1 Audio Input Mode

  • The product defaults to Bluetooth mode when no external audio device is connected.
  • If an external playback device (AUX or U disk) is inserted, the device will power on in AUX or U disk playback mode.
  • During Bluetooth playback, inserting an AUX or U disk will immediately switch to that input.
  • When using USB sound card input, connect to a computer. Most systems will automatically switch; if not, manually select the switch.

8.2 Power Options

  • Use a power supply between 5-26VDC. A standard 5.5-2.1/2.5 power adapter is recommended.
  • Ensure the power supply provides sufficient current (e.g., 12V/24V standard power adapter with >2A output). Insufficient current can lead to low volume, distortion, or even damage to the circuit board.
  • The power supply voltage should not exceed 26V to prevent burning the circuit board.

8.3 Speaker Selection

  • The amplifier can continuously output 50W per channel (C50L) or 100W per channel (C100L).
  • For optimal performance, use 4-8 ohm speakers.
  • If the output is within 50W, adjust the power supply voltage (e.g., 12V power supply) or turn down the playback volume. Higher power supply voltage (e.g., 26V) is better for higher output.
  • If you experience a "hiccup" phenomenon in the speaker playback, first check the power supply. If the power supply is insufficient or a larger power supply is used, the second consideration is overheating. Reduce playback volume or ensure adequate heat dissipation.

8.4 Signal Problems (Bluetooth)

  • The PCB antenna provides a visible distance of up to 15 meters in an unobstructed environment.
  • If you cannot find Bluetooth or experience connection issues, consider the following:
    • Stay away from routers or other sources of interference.
    • If the module is installed in a metal casing, the metal may affect the PCB antenna signal. Consider pulling the antenna out of the shell or using an external antenna to improve signal.

9. Maintenance

  • Heat Sink: Ensure the heat sink is properly attached to the main chip using the thermal adhesive. Proper heat dissipation is crucial for sustained high performance.
  • Power Switch: The power switch on the board acts as a standby switch. For complete power off or if the device will be unused for a long time, unplug the DC power adapter.
  • Cleaning: Use a dry, soft cloth to clean the device. Avoid using liquids or abrasive cleaners.

10. User Tips

  • Noise Reduction: If you encounter noise in the audio output, try adjusting (increasing) the volume. Sometimes, a low initial volume setting can be perceived as noise.
  • Heat Sink Application: When assembling, ensure the heat sink tape's 3M glue is firmly pasted to the chip. The hotter the chip gets, the better the thermal conductivity should be.
  • Sound Quality: Users have reported excellent sound quality with impressive signal-to-noise ratio, crystal-clear highs, and deep bass, especially when paired with appropriate speakers and power supply.
  • APP Functionality: The Sinilink app provides convenient control over volume, tone, and flash drive playback, enhancing the user experience.
  • Easy Assembly: The DIY assembly is generally straightforward, and a small screwdriver is usually included.

11. Warranty and Support

This product is CE certified, indicating compliance with European safety, health, and environmental protection requirements.

For further detailed instructions, diagrams, or technical support, please refer to the official user manual available in PDF format. You can typically find this document on the product's official page or by contacting customer support. A direct link to the PDF manual is: User manual (PDF)


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.