1. Introduction
Thank you for choosing the MICTUNING BB60 6-Gang Wireless Switch Panel. This product is designed to provide a clean, professional, and wireless solution for controlling multiple auxiliary devices in your vehicle. With its advanced features and robust design, it offers reliable control from up to 164 feet away, making it ideal for offroad trucks, marine applications, SUVs, UTVs, and cars. This manual will guide you through the installation, operation, and maintenance of your new wireless switch panel.
2. Package Contents
Please check the package carefully to ensure all items are present and undamaged:

Image: Complete package contents including control box, switch panel, and accessories.
- Control Box: 1
- Switch Panel: 1
- 140 Stickers (sheet): 1
- User Manual: 1
- Bracket: 1
- USB Cable: 1
- Wires: 2
- Fuses: 8
- AAA Batteries: 4
- Screws: 12
- Terminal Connectors: 12
- Screwdriver: 1
3. Specifications

Image: Wireless Switch Panel dimensions (1.5 in H, 5.4 in L) and power specifications.
| Feature | Description |
|---|---|
| Input Voltage | 12V/24V DC |
| Max. Power (12V) | 960W |
| Max. Power (24V) | 1920W |
| Max. Current | 80A |
| Operating Temperature | -30°C to 85°C (-22°F to 185°F) |
| Switch Panel Dimensions (approx.) | 1.5 inches (Height) x 5.4 inches (Length) |
| Control Range | Up to 164 feet |
4. Setup and Installation
4.1 Mounting the Control Box
Choose a suitable location for the control box, ensuring it is secure and protected from excessive moisture or heat. Use the provided screws to mount the control box firmly.

Image: Before and after installation, showing how the control box helps organize wiring in the engine bay.
4.2 Wiring the Power Hub
The control box acts as a power hub for your auxiliary devices. Follow the wiring diagram below for proper connection:

Image: Simplified wiring diagram for the 6-Gang control box, illustrating connections to the battery and various lights.
- Control Box Power Cable: Connect the main power cable of the control box to the ACC (Accessory) or the positive terminal of your vehicle's battery.
- Device Connections: Insert the positive and negative cables of your auxiliary devices into the corresponding ports on the control box. The 6-gang fuse block has the following circuit ratings:
| Circuit | Rating |
|---|---|
| Circuit 1 | 10A |
| Circuit 2 | 15A |
| Circuit 3 | 20A |
| Circuit 4 | 10A |
| Circuit 5 | 15A |
| Circuit 6 | 20A |
4.3 Powering the Switch Panel
The wireless switch panel can be powered by two AAA batteries (included) or via the provided USB cable. Ensure the batteries are correctly inserted or the USB cable is connected for the panel to function.
5. Operating Instructions
Video: Demonstrates control mode setting, wiring instructions, and panel pairing for the BB60 switch panel.
5.1 Control Modes
The BB60 switch panel offers four custom control modes, each indicated by a specific color:

Image: Visual examples of the four control modes: Toggle, Flash, Strobe, and Momentary.
- Toggle (Red): Press once to turn the device ON, press again to turn it OFF.
- Momentary (Blue): The device activates only when the button is held down. Releases when the button is released.
- Flash (Purple): The device flashes at a slower speed, similar to a turning signal.
- Strobe (Green): The device strobes rapidly, like a warning light.
5.2 Setting Control Modes
You can personalize each switch to your desired control mode:
- Enter Setting State: When the switch panel is powered on, press and hold any two switches simultaneously for 3 seconds. The white backlight will turn off, and the red mode indicator lights above each switch will light up and flash, indicating you are in setting mode.
- Cycle Through Modes: Press any individual switch repeatedly to cycle through the four modes (Red for Toggle, Blue for Momentary, Green for Strobe, Purple for Flash). Assign your desired mode to each switch.
- Save Settings: Once you have set all desired modes, press and hold any two switches simultaneously for 3 seconds again. All indicators will flash and then turn off, confirming your settings have been saved.
Note: After saving settings, please wait for 2 seconds before turning off the panel to ensure the settings are properly stored.
5.3 Panel Pairing
To establish a wireless connection between the switch panel and the control box:

Image: Step-by-step guide for easy pairing of the switch panel and control box.
- Activate Pairing on Control Box: Press and hold the pairing button on the control box (power hub). The pairing indicator light on the control box will light up.
- Initiate Pairing on Switch Panel: While the control box's pairing indicator is lit, press any button on the wireless switch panel.
- Confirm Pairing: The pairing indicator on the control box will flash three times, indicating that the pairing is successful.
Note: The control box must be connected to ACC (Accessory) or the positive battery terminal to operate normally and for pairing.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the switch panel and control box. Avoid using harsh chemicals or abrasive cleaners.
- Battery Replacement: For the wireless switch panel, replace the two AAA batteries after approximately 16 hours of continuous use to ensure smooth operation.
- Fuse Inspection: Periodically check the fuses in the control box. If an indicator next to a fuse does not light up when the corresponding switch is activated, it means the fuse is faulty and needs to be replaced with a spare fuse of the correct rating.
7. Troubleshooting
- Panel Not Responding:
- Check if the AAA batteries in the switch panel need replacement.
- Ensure the USB cable is securely connected if using USB power.
- Verify that the control box is properly powered (connected to ACC or battery positive).
- Attempt to re-pair the switch panel with the control box (refer to Section 5.3).
- Device Not Activating:
- Check the wiring connections between the device and the control box.
- Inspect the fuse corresponding to the device's circuit in the control box. If the indicator light next to the fuse is off, replace the fuse.
- Ensure the control mode for that switch is set correctly (e.g., Toggle for continuous power, Momentary for temporary power).
- Intermittent Control:
- Ensure the switch panel is within the 164-foot control range of the control box.
- Check for any obstructions or strong electromagnetic interference that might affect the wireless signal.
8. User Tips
- Easy Connection: Users have noted that the product is straightforward to connect, making installation hassle-free.
- Labeling: Utilize the included 140 stickers to clearly label each switch for quick identification of its function.
- Pre-configure Modes: Before final installation, take advantage of the setting mode to pre-configure your desired control modes for each switch. This saves time and effort during setup.
9. Warranty and Support
MICTUNING is committed to providing high-quality products. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For detailed warranty information, technical support, or assistance with any issues not covered in this manual, please contact MICTUNING customer service through their official channels. Keep your purchase receipt as proof of purchase for warranty claims.
For further information, you may also refer to the official user manual PDF: View User Manual (PDF)