Electric Scooter Finger Speed Accelerator User Manual

1. Safety Warnings

WARNING! Improper use may cause injury, choking, fire, or electric shock.

• Keep out of reach of children under 16 years of age.
• Do not use if damaged or modified.
• Do not expose to extreme heat, open flame, or prolonged moisture.

SAFETY INFORMATION:

• Read all instructions before use and retain for future reference.
• This is NOT a toy.
• No unsupervised use by children or persons with reduced physical, sensory, or mental capabilities.
• Avoid contact with eyes, mouth, or open wounds.
• Disconnect power and stop operation before cleaning or maintenance.
• Seek immediate medical assistance if injury occurs.

2. Product Information

3. Package Contents

The package typically includes:

• 1 x Electric Scooter Finger Speed Accelerator (Throttle)
• Integrated wiring for connection

Image: New model throttle with integrated wiring.

4. Setup and Installation

Follow these steps for correct installation:

1. Unpack the new throttle and carefully inspect it for any signs of damage.
2. Gather the necessary removal tools, such as a screwdriver and a pry bar, to safely detach the old parts from your scooter.
3. Carefully remove the existing throttle or damaged parts from your electric scooter.
4. Prepare the new throttle. Identify the connection interface on both the new part and your scooter. Ensure they match.
5. Connect the new throttle to the scooter's wiring harness correctly. Pay attention to the pin configuration if applicable.
6. Use your tools to securely reassemble the new throttle onto the scooter's handlebars.
7. After installation, perform a post-use test to verify proper functionality of the throttle and all associated buttons.

Image: Comparison of Old Model and New Model throttles. Ensure you have the correct model for your scooter.

Image: Example installation of the New Model throttle on scooter handlebars.

Image: Example installation of the Old Model throttle on scooter handlebars.

5. Operating Instructions

The finger speed accelerator allows for intuitive control of your electric scooter's speed and other functions. The button layout may vary slightly between old and new models.

New Model Throttle Controls:

Image: New Model throttle showing button layout.

• Power Button (Circle with Line): Typically used to power on/off the scooter or display.
• Light / Mode Button (Lightbulb with +/-): Controls the scooter's lights or cycles through different riding modes (e.g., Eco, Normal, Sport).
• Speed Up / Down Buttons (Arrows): Adjusts the speed or power level of the scooter.

Old Model Throttle Controls:

Image: Old Model throttle showing button layout.

• Light Button (Lightbulb): Controls the scooter's lights.
• Speed Up / Down Buttons (Arrows): Adjusts the speed or power level of the scooter.

Refer to your scooter's main user manual for specific functions and combinations of these buttons.

6. Care & Maintenance

• Clean the throttle only with a dry cloth. Avoid using liquids or harsh chemicals.
• Store the scooter and its components in a cool, dry place, away from direct sunlight.
• The estimated service life of the throttle is 5 years, assuming no man-made damage.
• If the throttle malfunctions, cracks, or breaks, replace it immediately to ensure safe operation.

7. Usage Restrictions

• This product is not intended for use by children under 18 years of age.
• Do not use or store the throttle near open flames or corrosive chemicals.
• Do not immerse the throttle in water.
• Ensure compatibility: This throttle is not compatible with all electric scooter models. Verify that it matches your scooter's specifications before installation.

8. Troubleshooting

• Throttle not responding:
  • Check all wiring connections to ensure they are secure and correctly seated.
  • Verify that the throttle is compatible with your specific scooter model. Mismatched models may not function correctly.
  • Inspect the throttle for any visible damage or breaks. Replace if damaged.
• Buttons not working:
  • Ensure the scooter is powered on.
  • Check for any physical obstructions or debris around the buttons.
  • If individual buttons fail, the throttle unit may need replacement.
• Physical damage upon arrival:
  • Inspect the product immediately upon receipt. If any damage is found, do not install and contact the seller.

9. Specifications

10. User Tips

• Always verify the model of your scooter and the throttle to ensure perfect compatibility before purchase and installation.
• When replacing parts, ensure all connections are firm and correct to avoid malfunctions.
• If you receive a damaged product, contact the seller immediately and do not attempt installation.
• Consider the quality of the replacement part; some users report good durability, while others experience early failure.

11. Frequently Asked Questions (FAQ)

Q: How many pins does the connector have?

A: The number of pins can vary depending on the specific scooter model and throttle version (old vs. new). It is crucial to check the connection interface of your existing throttle and compare it with the replacement part before purchase. Refer to product images for visual guidance on common connector types.

Q: Is this throttle compatible with the Hitway H18 scooter?

A: This throttle is specifically designed for AUSOM F1 MAX, K20 PRO, GOSOUL 2, DT2, L1, L2, and KUGOO F3 PRO MAX PLUS Electric Scooters. Compatibility with other brands like Hitway H18 is not guaranteed and should be verified by comparing the original part's specifications and connector type.

Q: Can I see a photo of the connection input?

A: Please refer to the product images provided in the listing, which often include detailed views of the wiring and connector interfaces to help you verify compatibility.

12. Manufacturer & Support Information

For further assistance or inquiries, please contact the manufacturer or your point of purchase.