1. Product Overview
The MEKEDE LA10 Series Wireless CarPlay Android Auto Decoder is designed to integrate advanced smartphone connectivity and multimedia features into your Mercedes Benz vehicle's existing NTG system. This device allows for seamless use of CarPlay and Android Auto, along with other multimedia functions like video playback and navigation, enhancing your driving experience.

2. Package Contents
The package contents may vary slightly depending on the specific model (LA9, LA10, LA10+TV BOX) and NTG system compatibility. Please verify all components upon receipt.
LA10 (NTG 5.0) Accessories:

LA10 (NTG 4.0) Accessories:

LA9 (NTG 4.5) Accessories:

3. Installation Guide
CAUTION: Never turn on the ignition with the factory radio removed.
This installation requires professional knowledge and careful handling of vehicle electronics. It is recommended to seek professional assistance if you are not familiar with car audio system installations.
3.1. Wiring Diagram

3.2. Connection Steps
- Power Connection: Connect the yellow wire to B+ (battery positive), red wire to ACC (accessory power), black wire to GND (ground), and blue wire to the camera power supply.
- LVDS Cable: Connect the LVDS cable from the decoder to the original vehicle's LVDS port. Ensure it is securely connected to the original car's host terminal.
- Camera Inputs:
- REAR-CVBS: Connect to the rearview camera or a 360-degree panoramic AHD output.
- FRONT-CVBS: Connect to the front-view camera.
- 360-TX/RX: If using a 360 panoramic universal box, connect 360-TX to the box's TXD and 360-RX (white and black wires) to the box's RXD.
- Brown Wire (Rear Detect): Connect this wire to the rearview light cable or the 360 panoramic detection cable.
- USB Connection: Use the USB port to connect your mobile phone, USB flash drive, or for software upgrades.
- AUX Audio Output: Connect the AUX audio output to your car's audio input.
- WIFI Antenna: Ensure the WIFI antenna is installed and not attached to any metal surfaces to prevent signal interference.
Attention: When inserting the decoder into the host, please check if it is stuck properly.
3.3. Dip Switch Configuration
The DIP switches on the decoder box are used to configure the device for your specific car model and screen size. Ensure the CarPlay POWER is disconnected when adjusting these switches. Once set, reconnect the power.

| Switch 1 | Switch 2 | Function | Setting |
|---|---|---|---|
| OFF | OFF | Car Model | C/GLC/V/S |
| OFF | ON | Car Model | A/B/E/CLA/CLS/GLA/GLE/GLS |
| Switch 3 | Switch 4 | Function | Setting |
| OFF | ON | Screen Size | 800*480 (7.4"/8.4") |
| ON | OFF | Screen Size | 960*540 (8.4") |
| ON | ON | Screen Size | 1440*540 (12.3") |
4. Operating Instructions
4.1. Wireless CarPlay Connection
- On your iPhone, open Wi-Fi and Bluetooth settings.
- Search for and connect to the device named "CX_BT....." in the Bluetooth list.
- Confirm pairing and allow CarPlay to connect.

4.2. Wireless Android Auto Connection
- On your Android phone, open Wi-Fi and Bluetooth settings.
- Search for and click on the device named "CX-BTXXXX" in the Bluetooth list.
- Confirm pairing to establish the Android Auto connection.

4.3. Core Features
- Wireless/Wired CarPlay & Android Auto: Use your smartphone apps (maps, music, calls) directly on the car screen.
- Phone Mirror Link: Supports both iOS and Android devices for mirroring content.
- HDMI IN: Synchronously plays pictures and videos from external HDMI sources.
- Voice Control: Utilize voice assistants like Siri for navigation, calls, and music playback.
- Dual System Switch: Seamlessly switch between the original car system and the CarPlay/Android Auto interface.
- Original Control Retention: Maintain control via touch screen, steering wheel buttons, and the original knob.
- GPS Navigation: Built-in global positioning system with support for various map applications (iGO, Sygic, Yandex, Google Maps, Waze, Goode Map).
- AHD Reversing Video: Provides clearer rear-view video quality compared to ordinary cameras.
- Third-Party Video Software Support: For LA10+TV BOX models, enjoy apps like YouTube, Netflix, Twitch, Bilibili, and TikTok.





4.4. Control Methods
- Steering Wheel Buttons:
- Long press: Switch systems.
- Short press: Connect/hang up phone.
- Short press: Increase/decrease volume.
- Press: Restart.
- Central Control Knob:
- Move knob: Navigate cursor.
- Short press: Confirm selection.
- Move left/right: Skip tracks.
- Long press: Activate voice control.
- Touch Screen: Direct interaction with the display.

4.5. Car Settings
Access the car settings menu to configure various options, including camera settings, audio settings, and display preferences. Ensure that the original car's Bluetooth is connected for calls and media, and select the original car audio in the Bluetooth stereo interface before entering the Retrofit system.

4.6. Video Demonstration
5. Specifications
| Parameter | Value |
|---|---|
| Operating Temperature | -30°C to +75°C |
| Stored Temperature | -30°C to +85°C |
| Environment Humidity | ≤98% (at 45°C), 65±5% (rated) |
| Power Consumption (Rated) | 500mA |
| Power Consumption (Max) | 3A |
| Shutdown Current | 3mA (Clock is on) |
| Quiescent Current | Less than 3mA |
| Charging Current | ≤ 2A (Host activates circuit protection if >1A, current controlled below 1.5A) |
5.1. Car Multimedia Player Parameters
| Feature | LA9 | LA10 | LA10+TV BOX |
|---|---|---|---|
| OS | Linux | Linux | Linux |
| HDMI IN | ✗ | ✓ | ✓ |
| WIFI | ✓ | ✓ | ✓ |
| CarPlay+Auto | ✓ | ✓ | ✓ |
| Support YouTube | ✗ | ✗ | ✓ |
| Mirror Link | ✓ | ✓ | ✓ |
| DSP | ✗ | ✓ | ✓ |
| AHD | 720P | 1080P | 1080P |
| BT module | 5.0 | 5.0 | 5.0 |
| USB | ✓ | ✓ | ✓ |
| 360° Panorama | 720P | 1080P | 1080P |
| Reverse rearview | 720P | 1080P | 1080P |
5.2. Compatible Car Models
| System | Model | Screen Size |
|---|---|---|
| NTG 4.0 (Square LVDS) | For GLK (2008-2011) For W207 E COUPE (2009-2010) For W212 E CLASS (2009-2010) For W204 C CLASS (2007-2010) For SLS (2011-2014) For W218 CLS CLASS (2010-2012) | 7 inch |
| NTG 4.5 (Round LVDS) | For W117 CLA CLASS (2013-2014) For W176 A CLASS (2013-2015) For W166 ML/GL CLASS (2013-2015) For W172 SLK CLASS (2012-2014) For W204 C CLASS (2011-2013) For W207 E COUPE (2011-2014) For W212 E CLASS (2011-2014) For W218 CLS CLASS (2013-2014) For W231 SL CLASS (2013-2015) For W242 B CLASS (2012-2014) For W156 GLA CLASS (2015-2016) For X204 GLK CLASS (2013-2015) | 5.8 inch 7 inch 8 inch |
| NTG 5.0 (Round LVDS) | For W176 A CLASS (2016-2018) For W246 B CLASS (2015-2018) For W205 C CLASS (2014-2018) For W207 E COUPE (2015-2016) For W212 E CLASS (2015-2016) For W156 GLA CLASS (2017-2019) For W253 GLC CLASS (2016-2019) For W292 GLE CLASS (2016-2019) For W117 CLA CLASS (2015-2018) For W203 CLS CLASS (2015-2017) For W231 SL CLASS (2016-2019) For SLC CLASS (2014-2017) | 7 inch 8 inch 8.4 inch |
6. Maintenance
To ensure optimal performance and longevity of your MEKEDE decoder, follow these general maintenance guidelines:
- Keep the device and its connections clean and free from dust and debris.
- Avoid exposing the unit to extreme temperatures or moisture.
- Ensure all cables are securely connected and not pinched or damaged.
- Periodically check for firmware updates to improve performance and add new features.
7. Troubleshooting
If you encounter issues with your MEKEDE decoder, please refer to the following troubleshooting tips:
- Screen Not Displaying Normally: Check the LVDS cable connection and verify the DIP Switch settings are correct for your car model and screen size.
- Sound Problems: Ensure that the Multimedia and install system settings of the original car are correctly configured. Also, confirm that the original car's Bluetooth is connected and selected for audio playback.
- Pilot Lamp Not Working: Check the power cable connection and inspect the fuse for any issues.
- Connectivity Issues (CarPlay/Android Auto): Ensure your phone's Wi-Fi and Bluetooth are enabled and correctly paired with the device. Try restarting both your phone and the car's infotainment system.
- Intermittent Signal: Verify that the WIFI antenna is properly installed and not obstructed by metal components.
8. User Tips
- Initial Setup: Always ensure the car's ignition is off when making or checking wiring connections to prevent damage.
- Audio Quality: For the best audio experience, ensure your phone is connected to the original car's Bluetooth for media playback, and then switch to the decoder's system.
- Screen Resolution: Double-check your car's screen resolution and set the DIP switches accordingly to avoid display issues.
- TV Box Functionality: If you intend to use third-party video apps like YouTube or Netflix, ensure you have the LA10+TV BOX variant.
- Voice Commands: Familiarize yourself with the voice command functions for hands-free operation, which can be activated via a long press on the central control knob.
9. Warranty and Support
For detailed warranty information and technical support, please refer to the official MEKEDE product documentation or contact your seller. A comprehensive user manual in PDF format is available for download: MEKEDE LA9-BZ5.0 User Manual (PDF).