Important Safety Information
Disclaimer: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.
Always wear a helmet and appropriate safety gear when riding. Ensure all components are securely fastened before each ride. Do not operate the e-bike under the influence of alcohol or drugs. Be aware of your surroundings and ride defensively.
1. Package Contents
Upon opening your iScooter EB1S Electric Bike package, please verify that all the following components are included:
- EB1S Electric Bike (partially assembled)
- Saddle and Seatpost Clamp
- Front Wheel and Axle
- Front Fender
- Pedals (Left and Right)
- Tool Bag
- Charger (42V 1.5A EU charger)
- User Manual and Safety Instructions (PDF available at User Manual PDF)

2. Setup and Assembly
The iScooter EB1S is designed for easy assembly. Follow these steps to get your bike ready for its first ride:
- Install the Handlebar: Lift the handlebar and ensure it clicks into place. Secure the quick-release lever on the handlebar.
- Install the Front Wheel: Place the front wheel axle through the wheel hub. Secure with nuts.
- Install the Front Fender: Attach the front fender to the fork using the provided screws.
- Install the Saddle: Insert the seatpost into the frame and adjust to your desired height. Secure with the quick-release clamp.
- Install the Pedals: Identify left (L) and right (R) pedals. Screw them into the crank arms, ensuring correct threading (left pedal counter-clockwise, right pedal clockwise).
- Install the Rear Fender: Attach the rear fender to the frame using the provided screws.
- Fully Charge the Battery: Before first use, fully charge the battery. Connect the charger to the charging port on the bike and then to a power outlet. The charger indicator will show red during charging and turn green when fully charged (approx. 5-6 hours).
- Check Tire Pressure: Ensure tires are inflated to the recommended pressure.


3. Operating Instructions
Familiarize yourself with the controls and features of your iScooter EB1S for a safe and enjoyable ride.
3.1 Power On/Off
Press and hold the power button on the LCD display to turn the bike on or off.
3.2 LCD Display Functions
The high-definition touchscreen display provides real-time cycling information:

- 1. Real-time battery level: Indicates remaining battery charge.
- 2. Assistance level: Shows the current pedal assist mode.
- 3. Real-time speed: Displays current riding speed.
- 4. ODO: Total mileage: Records the total distance traveled.
- 5. TRIP: Range per charge: Shows distance traveled on the current charge.
- 6. VOL: Real-time voltage: Displays the battery's current voltage.
- 7. CUR: Real-time current: Shows the motor's current draw.
- 8. T1: Range: Estimated remaining range.
- 9. Headlights on: Indicator for activated headlights.
- 10. Pedestrian assist mode: Indicates pedestrian assist is active.
- 11. Connected app: Shows if the bike is connected to the mobile application.
- 12. Brakes activated: Indicator for when brakes are applied.
3.3 Speed Modes
Briefly press the mode button on the display to cycle through the three adjustable speed modes: 10 km/h, 15 km/h, and 25 km/h. An unlock feature allows speeds up to 35 km/h in certain regions, subject to local regulations.

3.4 Braking System
The EB1S is equipped with front and rear disc brakes, along with a power cut-off brake for enhanced safety. Apply brakes gently and evenly to avoid sudden stops. The power cut-off feature immediately disengages the motor when brakes are applied.

3.5 Lighting
The bike features high-brightness headlights and rear lights/reflectors for improved visibility, especially during nighttime riding. Ensure lights are functional before riding in low-light conditions.

3.6 Folding and Portability
The EB1S features a foldable design for easy storage and transport. To fold, locate the folding mechanism on the frame and follow the instructions in the manual. Unfolded dimensions are 118 x 53 x 95 cm, and folded dimensions are 118 x 42 x 82 cm.

4. Maintenance
Regular maintenance ensures the longevity and safe operation of your iScooter EB1S.
- Battery Care: Charge the battery regularly, even if not in use, to maintain its health. Avoid fully discharging the battery. Store the bike and battery in a cool, dry place.
- Tire Pressure: Check tire pressure before each ride. Maintain recommended pressure for optimal performance and safety.
- Brake Inspection: Regularly check brake levers, cables, and pads for wear and proper function. Adjust or replace as needed.
- General Cleaning: Clean the bike with a damp cloth. Avoid using high-pressure water jets directly on electrical components.
- Fastener Check: Periodically check all bolts, nuts, and quick-release levers to ensure they are tight and secure.
5. Troubleshooting
This section addresses common issues you might encounter with your EB1S electric bike.
| Problem | Possible Cause | Solution |
|---|---|---|
| Bike does not power on | Low battery; Loose battery connection; Faulty power button | Charge battery; Check battery connection; Contact support if button is faulty |
| Motor not assisting | Low battery; Incorrect assist level; Brake lever engaged; Motor fault | Charge battery; Increase assist level; Ensure brake levers are released; Check LCD for fault codes |
| Reduced range | Under-inflated tires; Heavy load; Riding uphill frequently; Cold weather; Aging battery | Inflate tires to correct pressure; Reduce load; Adjust riding style; Battery performance may decrease in cold weather; Consider battery replacement if significantly degraded |
| Brakes feel weak | Worn brake pads; Loose brake cable; Contaminated rotors | Inspect and replace brake pads; Adjust brake cable tension; Clean rotors with disc brake cleaner |
| LCD shows fault code | Specific system error | Refer to the full user manual (PDF) for a list of fault codes and their corresponding solutions. If unable to resolve, contact customer support. |
6. Specifications
Key technical specifications for the iScooter EB1S Electric Bike:
| Feature | Specification |
|---|---|
| Model Number | EB1S |
| Brand Name | iScooter |
| Type | Folding Electric Bicycle |
| Motor | 250W Brushless (Peak power up to 500W) |
| Wattage | 200 - 250W |
| Battery | 36V 12Ah Lithium battery |
| Voltage | 36V |
| Max Speed | <25km/h (Unlockable up to 35km/h) |
| Range per Charge | 30-50km |
| Charging Time | 5-6 hours |
| Wheel Size | 14 Inches (350mm) Inflatable Tires |
| Frame Material | Carbon Steel |
| Shock Absorption | Mid Suspension |
| Max Climbing Angle | 15% slope climbing |
| Rated Passenger Capacity | One Seat |
| Folded Design | Yes |
| Smart Function | Support APP Control |
| Smart LCD Display | Battery level/gear/speed/total mileage/fault code display |
| Unfolded Dimensions (L x W x H) | 118 x 53 x 95 cm |
| Folded Dimensions (L x W x H) | 118 x 42 x 82 cm |
| Net Weight (bike only) | 24 kg |
| Gross Weight (with accessories) | 28.1 kg |
| Certification | CE |


7. User Tips
- App Control: The EB1S supports APP control for real-time data tracking and ride planning. Please refer to the official product page or the included user manual for the specific name of the companion application and download instructions.
- Battery Range: To maximize your battery range, maintain proper tire pressure, avoid sudden accelerations, and utilize lower assist levels when possible.
- Folding Mechanism: Practice folding and unfolding the bike a few times to become proficient, making it quicker and easier for transport and storage.
- Safety First: Always perform a quick safety check before each ride, including brakes, tire pressure, and battery level.
8. Warranty and Support
For detailed warranty information, please refer to the official iScooter website or the warranty card included with your product. If you encounter any issues not covered in this manual or require further assistance, please contact iScooter customer support through their official channels.
You can also refer to the comprehensive user manual PDF for more in-depth information and troubleshooting guides: Download User Manual (PDF)