Heli CBD15, CBD18, CBD20

Contents

Heli Electric Pallet Jack User Manual

Models: CBD15, CBD18, CBD20

Your guide to safe and efficient operation.

1. Introduction

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Heli Electric Pallet Jack. The Heli Electric Pallet Jack series (models CBD15, CBD18, CBD20) is designed for material handling tasks, offering a compact design with a small turning radius, making it suitable for narrow aisle operations. Key features include a full metal cover for durability, a portable lithium-ion battery for easy replacement, an integrated handle with intuitive controls and an electricity meter, and low voltage protection to prevent battery over-discharge.

Heli DC15 Electric Pallet Jack, front-side view
Figure 1: Heli DC15 Electric Pallet Jack, front-side view.

2. Specifications

The following table outlines the key specifications for the Heli Electric Pallet Jack models CBD15, CBD18, and CBD20.

FeatureUnitCBD15CBD18CBD20
Rated capacitykg150018002000
Load centermm600600600
Lift heightmm200200200
Controller model-DC
DIY Supplies-Electrical
Forklift Battery Type-Lithium-Ion Battery
Fork Lengthmm1150
Operating Mode-Standing Operation
Terrain Adaptability-Indoor Flooring, Outdoor Pavement, Other
Warranty-1 Year

Note: Product parameters may vary due to different national regulations or configurations. The above information is for reference only.

3. Setup

3.1 Unpacking and Inspection

  • Carefully unpack the pallet jack and all accessories.
  • Inspect the unit for any signs of damage during transit. Report any damage to the supplier immediately.
  • Ensure all components listed in the packing list are present.

3.2 Battery Installation and Charging

The Heli Electric Pallet Jack uses a portable lithium-ion battery for convenience and ease of replacement.

  1. Locate the battery compartment, typically accessible from the top or side of the main unit.
  2. Insert the fully charged lithium-ion battery into the compartment, ensuring it is securely seated and all connections are firm.
  3. Before first use, ensure the battery is fully charged. Connect the charger to a suitable power outlet and then to the pallet jack's charging port.
  4. Monitor the electricity meter on the integrated handle to check the battery charge level.
  5. Disconnect the charger once the battery is fully charged.
Heli DC15 Electric Pallet Jack in a warehouse, showing battery area
Figure 2: Pallet jack in a warehouse setting, highlighting the main unit where the battery is housed.

3.3 Initial Checks

  • Verify that all wheels and forks move freely.
  • Check that the integrated handle and controls respond correctly.
  • Ensure the emergency stop button (if present) is easily accessible and functional.

4. Operating Instructions

The Heli Electric Pallet Jack is designed for standing operation with an integrated handle for intuitive control.

4.1 Controls Overview

The integrated handle contains all necessary controls for movement, lifting, lowering, and an electricity meter to display battery status.

Close-up of Heli DC15 Electric Pallet Jack handle and controls
Figure 3: Integrated handle and control panel.

4.2 Basic Operation

  1. Power On: Turn the key switch (if equipped) or press the power button on the handle. The electricity meter should illuminate.
  2. Movement: Use the directional controls on the handle to move the pallet jack forward or backward. The speed can typically be adjusted.
  3. Lifting Load: Position the forks underneath the pallet. Use the lift control button on the handle to raise the forks until the pallet is clear of the ground.
  4. Transporting Load: Ensure the load is stable and centered on the forks. Drive the pallet jack carefully to the desired location, maintaining a safe speed.
  5. Lowering Load: Once at the destination, use the lower control button on the handle to gently lower the forks until the pallet rests securely on the ground.
  6. Power Off: After use, lower the forks completely, park the pallet jack in a safe location, and turn off the power.
Heli DC15 Electric Pallet Jack lifting a pallet
Figure 4: Pallet jack in operation, lifting a pallet.

4.3 Safety Precautions

  • Always operate the pallet jack on stable and level surfaces.
  • Do not exceed the rated capacity of the pallet jack (1500kg, 1800kg, or 2000kg depending on model).
  • Ensure clear visibility and be aware of your surroundings.
  • Avoid sudden starts, stops, or turns, especially with a loaded pallet.
  • Never operate the pallet jack if the battery charge is critically low, as this can lead to unexpected power loss. The low voltage protection system will help prevent over-discharge.
  • Wear appropriate safety footwear and personal protective equipment.

5. Maintenance

Regular maintenance is crucial for the longevity and safe operation of your Heli Electric Pallet Jack.

5.1 Daily Checks

  • Check battery charge level and recharge as needed.
  • Inspect forks for damage or deformation.
  • Verify that all wheels are free of debris and rotate smoothly.
  • Test all controls (lift, lower, forward, reverse) for proper function.
  • Ensure the emergency stop button is operational.

5.2 Battery Care

  • Always use the manufacturer-recommended charger for the lithium-ion battery.
  • Avoid completely draining the battery. Recharge before it reaches critically low levels.
  • Store the battery in a cool, dry place if not in use for extended periods.
  • The integrated low voltage protection helps prevent over-discharge, but it's best practice to recharge proactively.

5.3 Cleaning and General Care

  • Keep the pallet jack clean, especially the wheels and fork mechanisms, to prevent accumulation of dirt and debris.
  • Wipe down the full metal cover with a damp cloth. Avoid using harsh chemicals.
  • Regularly check for loose fasteners and tighten as necessary.

5.4 Spare Parts

LIEBTY is dedicated to providing genuine spare parts with the highest quality. If you require spare parts, please submit your request with the product name, model, equipment serial number, and description of required parts. This ensures proper fit and function.

After-Sales Service information including spare parts
Figure 5: After-Sales Service details, including information on spare parts.

6. Troubleshooting

This section provides basic troubleshooting steps for common issues. For more complex problems, please contact customer support.

ProblemPossible CauseSolution
Pallet jack does not power on.Battery discharged or not properly installed.Check battery charge level and recharge. Ensure battery is correctly seated and connected.
Forks do not lift or lower.Overload, hydraulic issue, or control malfunction.Ensure load is within rated capacity. Check for obstructions. If problem persists, contact support.
Pallet jack moves erratically or not at all.Low battery, motor issue, or control malfunction.Check battery charge. Inspect wheels for obstructions. If problem persists, contact support.
Unusual noises during operation.Loose components, worn parts, or lubrication needed.Inspect for loose parts and tighten. Check for wear on wheels or bearings. Lubricate moving parts as per maintenance schedule.

7. Warranty and Support

7.1 Warranty Information

Heli grants a twelve-month (1 Year) or 2000-hours warranty for any machine purchased from us, whichever comes first. During the warranty period, in case of a defect in material or workmanship that has occurred with spare parts under normal operation, the defective part will be repaired or replaced free of charge, at our discretion.

7.2 Customer Support

For technical assistance, spare parts inquiries, or warranty claims, please contact our support team:

  • Contact Person: Daphne Han
  • WhatsApp/WeChat/Mobile: +86-13665707853
  • Email: daphne@liebty.com
  • Company: Liebty Machinery Technology (Hangzhou) Co., Ltd
  • Address: Room 208, Building 3, No.1866, Binxing Road, Changhe Street, Bingjiang District, Hangzhou, Zhejiang, China
WhatsApp QR code for Daphne Han
Figure 6: Scan for direct contact via WhatsApp with Daphne Han.

8. User Tips

While no specific user reviews or Q&A were provided for this product, general tips for electric pallet jack users include:

  • Regular Cleaning: Keep the wheels and forks free of debris to ensure smooth operation and prevent wear.
  • Battery Management: Always charge the lithium-ion battery fully before use and avoid deep discharges to prolong its lifespan.
  • Load Distribution: Distribute loads evenly on the forks to maintain stability and prevent tipping.
  • Environmental Awareness: Be mindful of the terrain. While adaptable to indoor and outdoor pavements, avoid excessively rough or uneven surfaces.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.