ONIKUMA CW935 Wireless Gaming Mouse User Manual

1. Introduction

The ONIKUMA CW935 is a high-performance wireless gaming mouse designed for esports enthusiasts and general users. It offers versatile connectivity options, customizable features, and an ergonomic design for extended comfort during use. This manual provides detailed instructions for setting up, operating, and maintaining your CW935 mouse.

2. Product Overview

2.1. Key Features

• Tri-Mode Connectivity: Seamlessly switch between 2.4G wireless, Bluetooth, and wired modes for untethered performance.
• Adjustable DPI: Six customizable DPI levels (800-1200-1600-2400-4800-12800) for precise control in various scenarios.
• RGB Backlighting: Dynamic color-changing lighting effects with 7 free-switching modes to enhance visual appeal.
• Ergonomic Design: The curved back provides comfortable hand support for prolonged gaming sessions.
• Lightweight: Weighs approximately 79g for featherlight precision and quick movements.
• Rechargeable Battery: Built-in 500mAh battery, rechargeable via a convenient Type-C interface.
• Hidden USB Receiver Storage: Integrated storage compartment at the bottom for the 2.4G USB receiver, ensuring portability.

2.2. Mouse Layout

Refer to the diagram below for the location of buttons and features.

1. Left Button
2. Right Button
3. Middle Button (Scroll Wheel)
4. DPI Switch Button
5. Forward Button
6. Back Button
7. Light On/Off Switch (located on the bottom)

Image: Mouse layout showing 6 adjustable DPI levels.

Image: Ergonomic design providing comfortable hand support.

3. Setup and Connection

3.1. Initial Charging

Before first use, it is recommended to fully charge the mouse. Connect the mouse to a USB power source using the provided Type-C cable. The red light will be steadily on during charging and will turn off once fully charged.

3.2. Connecting the Mouse

The CW935 supports three connection modes: 2.4G Wireless, Bluetooth, and Wired.

Image: Hidden storage for the 2.4G USB receiver and bottom controls.

1. 2.4G Wireless Mode:
   • Locate the USB receiver stored in the bottom compartment of the mouse.
   • Plug the USB receiver into an available USB port on your computer.
   • Turn on the mouse using the power switch on the bottom. The computer should automatically detect and install the necessary drivers.
   • Note: If the receiver is not connected to the USB port, the mouse light will not illuminate.
2. Bluetooth Mode:
   • Turn on the mouse and switch to Bluetooth mode (refer to the switch on the bottom for mode selection).
   • On your computer, go to Bluetooth settings and search for new devices.
   • Select "ONIKUMA CW935" from the list of available devices to pair.
3. Wired Mode:
   • Connect the mouse to your computer using the provided Type-C USB cable.
   • The mouse will function as a wired mouse and will also charge simultaneously.

Image: Wired, Wireless, and 2.4G connection options.

4. Operating Instructions

4.1. DPI Adjustment

Press the DPI Switch Button (usually located behind the scroll wheel) to cycle through the six adjustable DPI levels: 800, 1200, 1600, 2400, 4800, and 12800. Each press will change the sensitivity, allowing you to find the optimal speed for your tasks or games.

Image: User operating the ONIKUMA CW935 mouse.

4.2. RGB Lighting Control

The mouse features dynamic RGB lighting effects. Use the dedicated Light On/Off Switch (located on the bottom of the mouse, near the power switch) to control the lighting. There are 7 different lighting effects that can be freely switched.

4.3. Sleep Mode

To conserve battery, the mouse enters sleep mode automatically:

• First-level sleep: After 30 seconds of inactivity, the mouse lights will turn off. Moving the mouse will wake it up.
• Deep sleep: After 8 minutes of inactivity, the mouse enters a deeper sleep state. Pressing any button will wake it up.

5. Maintenance and Care

To ensure the longevity and optimal performance of your ONIKUMA CW935 mouse, please observe the following precautions:

• Avoid using the mouse on surfaces with low finish or rough textures (e.g., carpets, rough wood) to prevent damage to the sensor and feet.
• Do not subject the mouse to strong impacts or violent pressure.
• Do not use the mouse in high temperatures or under direct strong light.
• Keep the mouse away from liquids. Do not immerse it in water.
• Clean the mouse regularly with a soft, dry cloth to remove dust and debris.

6. Troubleshooting

• Mouse not responding:
  • Ensure the mouse is sufficiently charged.
  • Check if the USB receiver is properly plugged into the computer's USB port (for 2.4G wireless mode).
  • Verify the mouse is powered on and in the correct connection mode (2.4G, Bluetooth, or Wired).
  • If in 2.4G wireless mode, remember that the mouse light will not illuminate if the receiver is not connected.
• Lag or disconnections:
  • Ensure the mouse is within the effective transmission distance (approximately 10 meters for 2.4G wireless).
  • Minimize interference from other wireless devices operating on similar frequencies.
  • Try switching to wired mode to rule out wireless interference or battery issues.

7. Specifications

Image: Product specifications and package contents.

8. User Tips

No specific user tips were available from provided reviews or Q&A content.

9. Warranty and Support

For detailed warranty information and further technical support, please refer to the official user manual PDF available at: ONIKUMA CW935 User Manual (PDF).