MEKEDE LA10+TV BOX

Contents

MEKEDE Carplay TV Box Wireless Android Auto Instruction Manual

Model: LA10+TV BOX

For BMW 1, 2, 3, 5, 7 Series, X1, X3, X4, X5, X6

MEKEDE LA10+TV BOX product overview

1. Introduction

The MEKEDE Carplay TV Box is an advanced multimedia interface designed to upgrade your BMW's original vehicle system. It seamlessly integrates wireless Apple CarPlay and Android Auto, provides HDMI input for external devices, and supports a wide range of third-party video applications like Netflix and YouTube. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and user experience.

Product Overview Video

2. Compatible Cars

This device is compatible with various BMW models and systems. Please refer to the table below to confirm compatibility with your vehicle's system (CCC, CIC, NBT, EVO) and screen size.

Compatibility table for BMW models

Please Note:

  • If your car model is BMW 6 Series and 535i (CIC system), please contact the seller before purchasing to prevent ordering errors.
LVDS Connection types for BMW systems

LVDS Connection Types: 10PIN for CCC, 4PIN for CIC, 6PIN for NBT, 6PIN for NBT_EVO.

3. Package Contents

Please check the package for the following items:

Accessories (LA9)

Accessories for LA9 model
  • Carplay BOX
  • Power Cable
  • LVDS Cable
  • WIFI Antenna
  • MIC

Accessories (LA10 / LA10+TV BOX)

Accessories for LA10 and LA10+TV BOX models
  • Carplay BOX
  • Power Cable
  • LVDS Cable
  • RCA Cable
  • MIC
  • WIFI Antenna
  • TV BOX (Only LA10+TV BOX has this cable)

4. Installation Instructions (LA9-BMCIC CIC System Example)

This section provides a general guide for installation. Professional installation is recommended. Ensure the vehicle's power is off before beginning installation.

LA9-BMCIC CIC installation wiring diagram and instructions

4.1 Wiring Connections

  • Power Connection: Connect Yellow to B+, Red to AC, Black to GND.
  • LVDS Connection: Connect to the original vehicle LVDS. If the original buttons are 4PIN, use the 4PIN connection. If 10PIN, use the 10PIN connection.
  • CAN Connection: Connect to CAN1. If the original button doesn't work, connect to CAN2 and cut the button to CAN2.
  • Camera Power Supply: Blue wire for camera power supply.
  • Rear Detect: Brown wire for rear detect, connect to the view light cable or 360 panoramic detection cable.
  • 360 Panoramic: White and Black wires for 360-RX, connected to 360 panoramic universal box TXD.
  • FRONT-CVBS: Connect to the front view camera.
  • AUX: Audio output.
  • USB: Connect mobile phone, USB flash drive, software upgrade.
  • MIC: Extra MIC interface.

4.2 Important Installation Notes

  • The antenna cannot be pasted with metal.
  • When inserting the Carplay BOX to the host, please check if it is stuck properly.
  • Before entering the installation system, cut the original car's voice way to AUX channel and set the voice to 8.
  • Check AUX and MIC connections for correctness.

4.3 CIC Setting

Refer to the table on the installation diagram for CIC settings:

Setting Description
Car Model Attach to CAN1 (default), Attach to CAN2 (set if iDrive joystick not work), Attach to CAN1 other1 (Need to plug in the knob adapter cable), Attach to CAN2 other2 (Need to plug in the knob adapter cable)
Screen Size 800*480 6.5", 1280*480-1 8.8"/10.25", 1280*480-2 8.8"/10.25", 1280*480-3 (Priority) 8.8"/10.25"

5. Operation

5.1 Dual System Switch

The device is compatible with the original car system. Dual systems can be switched freely and seamlessly, allowing you to retain original controls like touch screen, steering wheel control, and knob control.

Dual System Switch and original control retention

5.2 Wireless/Wired CarPlay

Connect your iPhone wirelessly via Bluetooth or with a USB cable. Once connected, you can use your iPhone apps on the car screen, including online maps, music playback, and making phone calls.

Wireless/Wired CarPlay interface demonstration

5.3 Wireless/Wired Android Auto

Connect your Android phone wirelessly or with a USB cable to access Android Auto. Get real-time alerts on Google Maps and Waze, make calls, check messages, reply, and use your favorite music apps while driving.

Wireless/Wired Android Auto interface demonstration

5.4 HDMI IN

The device supports HDMI IN, allowing you to synchronously play your favorite pictures and videos from external HDMI sources on your car's screen.

HDMI IN feature demonstration

5.5 Third-Party Video Software Support

Watch videos online or offline for an enhanced in-car entertainment experience. The system supports popular apps like YouTube, Netflix, Twitch, Bilibili, and Facebook. Note: To watch videos using third-party video apps, you need the LA10+TV BOX model.

Third-party video software logos TV Box for third-party video apps

Support wireless or wired mirror link for both iOS and Android phones. This feature allows you to display your phone's screen on the car's display, enabling navigation, video playback, and other app usage.

Phone Mirror Link demonstration

5.7 GPS Navigation

The built-in global positioning system provides omni-directional map display and synchronous display of real-time traffic conditions for rapid and accurate positioning. Supports various navigation apps.

GPS Navigation apps demonstration

5.8 AHD Reversing Video

Experience clearer rear-view video with AHD technology, offering superior picture quality compared to ordinary cameras for safer reversing.

AHD Reversing Video demonstration

5.9 Voice Control

Utilize the voice assistant to control navigation, make phone calls, play music, and execute other operational commands hands-free.

Voice Control demonstration with commands like 'Turn on the radio', 'Go Home', 'Play Music', 'Go to a nearby gas station'

5.10 Steering Wheel and Central Control Button Instructions (CIC System Example)

Steering Wheel Buttons:

  • Short press: Connect/hang up phone.
  • Long press: Activate voice control (without using original car Bluetooth).
  • Short press +/-: Increase/decrease volume.
  • Long press -: Reduce volume.

Central Control Buttons:

  • Long press: Switch between systems.
  • Rotate knob: Move cursor.
  • Short press: Confirm selection.
  • Flip left/right: Switch between previous/next songs.
  • Long press (Right dial for 15 seconds): Confirm activation of language control.

6. Specifications

The following table outlines the key parameters for the MEKEDE Car Multimedia Player variants:

Car multimedia player parameter table for LA9, LA10, LA10+TV BOX
Feature LA9 LA10 LA10+TV BOX
OSLinuxLinuxLinux
HDMI IN✗✓✓
WIFI✓✓✓
Carplay+Auto✓✓✓
Support YouTube✗✗✓
Mirror Link✓✓✓
DSP✗✓✓
AHD720P1080P1080P
BT module5.05.05.0
USB✓✓✓
360° Panorama720P1080P1080P
Reverse rearview720P1080P1080P

7. User Tips

No specific user tips or frequently asked questions were available from customer reviews or Q&A for this product at this time. For general usage advice, refer to the operation section.

8. Troubleshooting

  • No Power: Check all power connections (B+, AC, GND). Ensure the vehicle's ignition is on.
  • No Display: Verify LVDS cable connection. Ensure the correct screen size is selected in the CIC settings.
  • No Sound: Confirm the AUX audio output is correctly connected and selected as the audio source in your car's original system. Ensure the original car's voice way is cut to AUX channel and set to 8 as per installation notes.
  • CarPlay/Android Auto Not Connecting: Ensure Bluetooth is enabled on your phone and the device. For wired connection, try a different USB cable. Check phone settings for CarPlay/Android Auto permissions.
  • Buttons Not Responding: Check CAN connections. If using CAN2, ensure CAN1 is cut. Verify CIC settings for Car Model (CAN1/CAN2 selection).
  • Voice Control Issues: Ensure the MIC is properly connected. For steering wheel button voice control, long press the button.
  • Third-Party Video Apps Not Working: Ensure you have the LA10+TV BOX model. Check internet connection (WIFI).

9. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the device. Avoid using harsh chemicals or abrasive materials.
  • Software Updates: Periodically check for firmware and software updates from MEKEDE to ensure optimal performance and access to new features. Updates for Firmware, Software, UI, and GPS Navigation maps are provided for free.
  • Environmental Conditions: Avoid exposing the device to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.

10. Warranty and Support

All MEKEDE products undergo strict quality tests before shipment. This product comes with a 1-year warranty period from the date of receipt confirmation.

  • If the product has a problem within 365 days after receipt, you are eligible for free return and refund within 15 days, or a direct replacement of the new machine. Please contact customer support first to communicate the issue.
  • The warranty can be extended to 2 years if you provide a 5-star review and share installation photos on social media, then provide feedback to MEKEDE.
  • MEKEDE is committed to providing innovative hardware & software and offers free updates for Firmware, Software, UI, and GPS Navigation maps.

For technical support or warranty claims, please contact MEKEDE customer service through your purchase platform.

© 2024 MEKEDE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.