Seauto SAT 25

Contents

Seauto SAT 25 Robotic Pool Cleaner Instruction Manual

Model: SAT 25

Introduction

The Seauto SAT 25 is a powerful, cordless robotic pool cleaner designed for efficient and thorough cleaning of in-ground pools. Featuring advanced sonar navigation, Trace Drive technology, and a dual-brush system, it provides comprehensive cleaning of floors, walls, and waterlines. This manual provides essential information for the safe and effective operation and maintenance of your SAT 25 robotic pool cleaner.

Seauto SAT 25 Robotic Pool Cleaner

Figure 1: Seauto SAT 25 Robotic Pool Cleaner

Package Contents

Before you begin, please ensure all items are present in the package:

  • 1 x Seauto SAT 25 Robotic Pool Cleaner Device
  • 1 x Charger
  • 1 x User Manual
  • 1 x Hook
  • 1 x Set of Filters
Seauto SAT 25 Package Contents

Figure 2: Included accessories and main unit

Specifications

Feature Specification
Model SAT 25
Power Source Rechargeable battery (7800mAh capacity)
Applicable Pool Shapes In-ground pools, above-ground pools (flat ground)
Max Pool Size Up to 2000 sq ft (200 m²)
Water Depth Supported 1.6 - 16.4 ft (0.5 - 5 m)
pH Value Supported 7.0 - 7.8
Filter Fineness 250 μm
Debris Type Leaves, Algae, Stones, Pollen, Soil, etc.
Motor Type Dual 3200 RPM Brushless Motors
Motor Power 108W
Suction Motor Quantity 1
Flow Rate 80 GPM
Charging Time Approx. 2.5 hours
Continuous Cleaning Time Up to 3.0 hours
Battery Swap Time Only 10 seconds (swappable battery system)
Features Cordless, Press & Go, Auto-Dock When Low Battery, Floor Cleaning, Wall Cleaning, Waterline Cleaning, Sonar Navigation, App Control
Package Dimensions (L x W x H) 40cm x 30cm x 20cm
Package Weight 6.0 kg
Seauto SAT 25 Charging and Runtime

Figure 3: Quick Power and Full Coverage capabilities

Seauto SAT 25 Battery System

Figure 4: 10-Second Swappable Battery System details

Seauto SAT 25 Pool Types

Figure 5: Suitable for various pool shapes including Round, Rectangle, Kidney, and Irregular

Seauto SAT 25 Pool Materials

Figure 6: Compatible with various pool materials such as Concrete, Vinyl, Fiberglass, and Ceramic Tiles

Setup

  1. **Unpack the Cleaner**: Carefully remove the SAT 25 robotic pool cleaner and all accessories from the packaging.
  2. **Initial Charge**: Before first use, fully charge the device using the provided charger. The charging time is approximately 2.5 hours.
  3. **Filter Installation**: Ensure the filters are correctly installed in the cleaner. Refer to the maintenance section for filter access.
  4. **Placement in Pool**: Once charged, simply place the cleaner into the pool. It is designed for "Press & Go" operation.
Seauto SAT 25 Easy to Use

Figure 7: The Seauto SAT 25 is designed for easy use

Operating Instructions

Starting a Cleaning Cycle

  1. **Power On**: Press the Start button on the device.
  2. **Select Mode (Optional)**: If available, select your desired cleaning mode (e.g., Floor Mode, Wall Mode) via the device controls or the companion app.
  3. **Submerge**: Gently lower the SAT 25 into the pool. The cleaner will begin its operation automatically.
Seauto SAT 25 Spotless in 3 Hours

Figure 8: Set it, forget it – the SAT 25 cleans your pool in approximately 3 hours

Cleaning Modes and Features

  • **Floor Mode**: The cleaner scans, plans, and cleans the pool floor with smart routing for comprehensive coverage.
  • **Wall Mode**: Utilizes sonar-guided N-path coverage for precision cleaning of pool walls and waterlines.
  • **All-Terrain Mode**: Combines wall cleaning, self-cleaning, and floor parking functionalities for versatile operation.
  • **App Control**: For full customization and advanced settings, the SAT 25 can be controlled via a dedicated mobile application.
Seauto SAT 25 Sonar Navigation

Figure 9: Sonar Precision and Structured Coverage in action

Seauto SAT 25 Wall and Floor Cleaning

Figure 10: The SAT 25 cleans floors, walls, and waterlines

Seauto SAT 25 All-Terrain Mode

Figure 11: All-Terrain Mode for versatile cleaning, including wall cleaning, self-cleaning, and floor parking

Seauto SAT 25 Floor Mode

Figure 12: Floor Mode scans, plans, and cleans with smart routing

Seauto SAT 25 Wall Mode

Figure 13: Wall Mode provides precision cleaning with sonar-guided N-path coverage

Seauto SAT 25 App Control

Figure 14: App-controlled cleaning for full customization

Seauto SAT 25 Dual Brushes

Figure 15: Dual brushes provide quad-level performance for deep-scrub cleaning

Seauto SAT 25 Agile Design

Figure 16: Agile design with tank-like tracks for seamless movement and obstacle crossing

Retrieving the Cleaner

The SAT 25 features an auto-dock function when the battery is low. Use the provided hook to safely retrieve the cleaner from the pool.

Maintenance

Regular maintenance ensures optimal performance and longevity of your Seauto SAT 25.

  1. **Filter Cleaning**: After each cleaning cycle, remove and clean the filters. Rinse them thoroughly to remove collected debris.
  2. **Battery Care**: The SAT 25 features a 10-second swappable battery system. Ensure the battery is fully charged before each use. Store the cleaner and battery in a cool, dry place when not in use.
  3. **General Cleaning**: Periodically wipe down the exterior of the cleaner with a soft cloth to remove any residue.
Seauto SAT 25 Easy Maintenance Steps

Figure 17: Steps for easy maintenance and cleaning

Troubleshooting

If you encounter issues with your Seauto SAT 25, refer to the following common troubleshooting steps:

  • **Cleaner Not Moving/Operating**:
    • Ensure the battery is fully charged.
    • Check for any obstructions in the brushes or tracks.
    • Verify the cleaner is properly submerged and the start button has been pressed.
  • **Poor Cleaning Performance**:
    • Clean the filters thoroughly. Clogged filters can reduce suction power.
    • Ensure the pool's pH value is within the supported range (7.0-7.8).
    • Confirm the pool size is within the maximum supported area (2000 sq ft / 200 m²).
  • **Cleaner Not Climbing Walls**:
    • Check the battery level; wall climbing requires more power.
    • Ensure the pool surface is suitable (concrete, vinyl, fiberglass, ceramic tiles).
    • Verify the slope gradient is less than 90 degrees.

User Tips

  • **First Use**: Always ensure the robot is fully charged before its initial deployment for optimal performance.
  • **Pool Compatibility**: The SAT 25 is ideal for in-ground pools and above-ground pools with a flat bottom. It performs best in pools where the slope gradient is less than 90 degrees and the size is under 2000 square feet.
  • **Debris Handling**: The cleaner is effective at picking up various debris, including leaves, algae, stones, pollen, and soil.
  • **Ease of Use**: Many users find the SAT 25 to be very easy to operate, simply requiring a press of a button to start cleaning.
  • **Wall Climbing**: The robot demonstrates excellent wall-climbing capabilities, making it efficient for comprehensive pool cleaning.

Warranty and Support

The Seauto SAT 25 comes with a comprehensive 3-year protection plan. This plan includes full machine replacement, ensuring your pool stays clean without service delays or repair wait times. For any support inquiries or warranty claims, please contact Seauto customer service.

Seauto SAT 25 3-Year Warranty

Figure 18: 3-Year Full Replacement Protection Plan

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.