MEKEDE DSP amplifier

Contents

MEKEDE 32 EQ Car DSP Amplifier

Digital Sound Audio Processor for Car Radios

1. Introduction

The MEKEDE 32 EQ Car DSP Amplifier is a high-performance digital sound audio processor designed to enhance your car's audio system. It features 4*50W output power and offers advanced sound tuning capabilities, including a 32-band equalizer, delay adjustment, and various input options. This manual provides essential information for the proper installation, operation, and maintenance of your DSP amplifier.

MEKEDE Car DSP Amplifier front view
Front view of the MEKEDE Car DSP Amplifier.
MEKEDE Car DSP Amplifier rear view with 4x50W output
Rear view of the amplifier highlighting 4*50W output.

2. Setup and Installation

This DSP amplifier is designed for hidden, plug-and-play installation, minimizing the need for complex wiring modifications. Professional installation is recommended to ensure correct setup and prevent damage to the device.

2.1 Package Contents

Before installation, verify that all items are present in the package:

Package contents: DSP Amplifier, Packing box, Power cord
Included items: Car DSP Amplifier, Packing box, and Power cord.
  • Car DSP Amplifier
  • Packing box
  • Power cord

2.2 Installation Location

The compact size of the DSP amplifier allows for flexible placement within your vehicle, typically in discreet locations.

Suggested installation locations: under passenger seat or in passenger compartment
Recommended installation locations: under the passenger seat or within the passenger compartment.

2.3 Wiring Instructions

The DSP amplifier is compatible with most Android radios. The following diagram illustrates the standard wiring for an Android host.

Android host wiring diagram for DSP amplifier
Wiring diagram showing connections to DSP and Android host.
  • 20PIN connector: Connects to the DSP amplifier.
  • 16 PIN connector: Connects to the power line.
  • 16 PIN connector: Connects to the Android host.

Note: If you intend to use the DSP with an original car (non-Android) host, you may need to purchase an additional original car DSP harness. Contact MEKEDE for assistance if needed.

2.4 Interface Diagram

Familiarize yourself with the various input and output interfaces on the DSP amplifier:

DSP amplifier interface diagram with labeled ports
Detailed view of the DSP amplifier's interfaces.
  1. POWER IN: Power input interface.
  2. AUX IN L: External audio input to the left channel.
  3. AUX IN R: External audio input to the right channel.
  4. SW1: Includes ACC power supply and automatic antenna power supply.
  5. SW2: Contains the DSP status and original vehicle AUDIO IN for switching.
  6. 6-pin LRCA socket audio output.
  7. USB: For USB music playback.
  8. VOL/SEL: Volume adjustment and multi-function control.
  9. BASS: Bass adjustment.
  10. TRE: Treble adjustment.

3. Operation

The MEKEDE DSP amplifier offers comprehensive control over your car's audio environment.

3.1 DSP Equalizer Adjustments

The amplifier supports 32-band EQ adjustment via a dedicated APP (iOS/Android) or computer software. This allows for precise tuning of various audio parameters.

DSP Equalizer Adjustments interface
DSP Equalizer adjustment interface for fine-tuning sound.

Key adjustment features include:

  • Delay function
  • Mono adjustment
  • Mixing functions
  • HPF/LPF (High-Pass Filter/Low-Pass Filter)
  • Prime listening position adjustment
EQ adjustment segments for treble, midrange, and bass
Visual representation of EQ adjustment segments: Strong Treble, Comfortable Midrange, Gentle Bass.

3.2 Audio Input Options

The DSP amplifier supports multiple audio input sources:

  • USB Music: Insert a U disk into the USB port for direct playback of decoded audio files.
  • AUX Input: Connect external audio devices such as mobile phones and audio players via the AUX input.
  • Wireless BT Music: Stream audio wirelessly via Bluetooth.
  • Optical Fiber Input: For high-fidelity digital audio input.
  • Coaxial Input: Another option for digital audio input.
USB Music and AUX Input features
USB Music playback and AUX Input functionality.
Lossless audio transmission via USB
Lossless audio transmission through USB connection.

3.3 Sound Field Positioning

The DSP amplifier enables precise sound field positioning by controlling the timing of audio signals to each speaker. This creates a surround sound experience, enhancing the auditory enjoyment and making you feel immersed in the music.

Sound field comparison without and with DSP
Comparison of sound field without DSP (disordered) and with DSP (enhanced stereo and positioning).
Explanation of sound field positioning
Sound field positioning creates a concert hall-like experience by timing audio signals.

4. Maintenance

To ensure the longevity and optimal performance of your MEKEDE DSP amplifier, follow these general maintenance guidelines:

  • Keep the unit clean and free from dust and debris. Use a soft, dry cloth for cleaning.
  • Ensure all connections are secure and free from corrosion. Periodically check wiring for any signs of wear or damage.
  • Avoid exposing the unit to extreme temperatures or moisture.
  • Do not attempt to open the casing or perform repairs yourself, as this may void the warranty and cause further damage.

5. Troubleshooting

If you encounter issues with your DSP amplifier, refer to the following common problems and solutions:

5.1 Poor Sound Quality or Noise

Before and After DSP use comparison for sound quality
Visual comparison showing improved sound quality after DSP use.
  • Symptom: Sound is noisy or unclear.
  • Possible Cause: DSP settings are not optimized, or there is interference.
  • Solution: Use the APP or computer software to adjust the DSP equalizer settings. Ensure all cables are properly connected and shielded to minimize interference.
  • Symptom: Lack of bass or treble.
  • Possible Cause: EQ settings are flat or improperly adjusted.
  • Solution: Adjust the BASS and TREBLE controls on the unit or through the DSP software to achieve desired sound balance.

5.2 No Audio Output

  • Possible Cause: Power connection issue.
  • Solution: Check the power input (POWER IN) and ensure the unit is receiving power (LED indicator, if present).
  • Possible Cause: Incorrect input source selected or no signal from the source.
  • Solution: Verify that the correct audio input (USB, AUX, BT, Optical, Coaxial) is selected and that the source device is playing audio.
  • Possible Cause: Loose or incorrect speaker connections.
  • Solution: Inspect the 6-pin LRCA socket audio output connections to your speakers.

5.3 Connectivity Issues (Bluetooth/USB)

  • Bluetooth: Ensure the amplifier's Bluetooth is enabled and visible, and your device is in pairing mode. Try re-pairing the devices.
  • USB: Confirm the USB drive is formatted correctly and contains compatible audio files. Try a different USB drive.

If problems persist after attempting these solutions, please contact MEKEDE customer support for further assistance.

6. Specifications

Below are the detailed technical specifications for the MEKEDE 32 EQ Car DSP Amplifier:

Product size and specifications table
Product dimensions and key specifications.
Feature Specification
Model Name DSP amplifier
Output Power 50W*4
Signal-to-Noise Ratio >106dB
Standard Distortion 0.035%
Frequency Range 20Hz-20KHz
Standby Current 3mA
Voltage Range 9-16V
Maximum Working Current 15A
Item Weight 0.7kg
Item Size (L*W*H) 172mm * 110mm * 43mm
Audio Encoding Stereo
Certification CE
Origin Mainland China
DSP Adjustment Support
Wireless BT Music Support
AUX Input Support
Optical Fiber Input Support
Coaxial Input Support
RCA Output Support
APP Control (iOS/Android) Support
USB Connection Support

7. Warranty and Support

7.1 Product Warranty

The MEKEDE DSP amplifier comes with a 1-year factory warranty, covering manufacturing defects. Accessories are not included in this warranty. The warranty period can be extended to 2 years if you provide a 5-star review and share installation photos on AliExpress, followed by feedback to MEKEDE.

If the product experiences a problem within 365 days of receipt confirmation, MEKEDE supports free return and refund within 15 days, or direct replacement of the unit. Please contact customer support first to communicate any issues.

7.2 Firmware and Software Updates

MEKEDE is committed to providing a continuously improving user experience. We offer free updates for firmware, software, UI, and GPS navigation maps. Check the official MEKEDE website or contact support for the latest updates.

7.3 Customer Support

For any issues or questions regarding your DSP amplifier, please contact MEKEDE customer support. Many disputes arise from incorrect use or installation, so reaching out to support can often provide a quick and effective solution.

8. User Tips

  • Professional Installation: While designed for ease of installation, having a professional car audio technician install the unit can prevent common errors and ensure optimal performance.
  • Experiment with DSP Settings: Take time to explore the 32-band EQ and other DSP adjustments. Small changes can significantly impact sound quality.
  • Secure Connections: Always double-check all wiring connections to ensure they are firm and properly insulated to avoid signal loss or electrical issues.
  • Software Updates: Regularly check for software and firmware updates from MEKEDE to benefit from new features and performance improvements.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.