1. Introduction
Thank you for choosing the Avenli Rectangular Above-Ground Pool. This manual provides essential information for the safe assembly, operation, and maintenance of your pool. Please read all instructions carefully before setting up and using your pool to ensure a safe and enjoyable experience.
2. Package Contents
Please check to ensure all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.
- Rectangular Pool Liner (Multilayer PVC)
- Anti-Rust Steel Frame Structure
- Sand Filter Pump (3785 Lt/h)
- Safety Ladder
- Pool Cover
- Ground Cloth
- Repair Kit
- Instructional DVD
3. Specifications
| Feature | Detail |
|---|---|
| Model Number | 17728-1EU |
| Pool Type | Rectangular Above-Ground |
| Dimensions (L x W x H) | 549 x 305 x 122 cm (18 ft x 10 ft x 48 in) |
| Water Capacity (90%) | 15,233 Liters (approx. 4,024 Gallons) |
| Liner Material | Multilayer PVC (Lam-Tech Material) |
| Frame Material | Anti-Rust Steel Structure (U-Frame Support) |
| Filter Pump Type | Sand Filter Pump |
| Filter Pump Flow Rate | 3,785 Liters/hour |
| Estimated Assembly Time | Approximately 60 minutes (No tools required) |
4. Setup Instructions
-
Site Selection:
- Choose a firm, level surface free of sharp objects, debris, or loose soil.
- Ensure the area is large enough to accommodate the pool and allow for safe access around it.
- Avoid placing the pool under overhead power lines or near electrical outlets.
-
Ground Cloth Placement:
- Spread the included ground cloth evenly over the selected area. This protects the pool liner from punctures.
The rectangular pool placed on a ground cloth for protection. -
Liner Unfolding:
- Carefully unfold the pool liner onto the ground cloth. Position it so the drain valve is in a convenient location for drainage.
- Smooth out any wrinkles in the bottom of the liner.
-
Frame Assembly (No Tools Required):
- Assemble the steel frame according to the diagrams in the instructional DVD or included manual. The U-frame supports are designed for easy, tool-free connection.
- Ensure all frame components are securely locked into place.
-
Filling the Pool:
- Begin filling the pool with water. As the water level rises, continue to smooth out any remaining wrinkles in the bottom of the liner.
- Fill the pool to the recommended fill line, typically just below the top frame rail.
-
Filter Pump Installation:
- Connect the sand filter pump to the pool's inlet and outlet fittings as per the pump's specific instructions. Ensure all connections are tight to prevent leaks.
- Place the pump on a stable, level surface, away from the pool edge and any electrical sources.
Close-up view of the included sand filter pump. -
Ladder Assembly:
- Assemble the safety ladder following its dedicated instructions.
- Place the ladder securely at the pool edge, ensuring it is stable before use.
Image of the safety ladder for pool access.
5. Operating Instructions
5.1 General Pool Use
- Always supervise children and non-swimmers when the pool is in use.
- Do not dive or jump into the pool.
- Keep pets out of the pool to prevent damage to the liner.
- Use the safety ladder for entering and exiting the pool.
5.2 Sand Filter Pump Operation
- Refer to the separate manual provided with the sand filter pump for detailed operating instructions.
- Typically, the pump should run for several hours each day to ensure proper water circulation and filtration. The exact duration depends on pool size, usage, and water quality.
- Regularly backwash the sand filter as indicated by the pressure gauge or recommended schedule to maintain optimal filtration performance.
6. Maintenance
6.1 Water Chemistry
- Test pool water regularly (daily or every other day) for pH, chlorine, and alkalinity levels using a pool test kit.
- Maintain pH levels between 7.2 and 7.6.
- Maintain free chlorine levels between 1-3 ppm.
- Add appropriate pool chemicals as needed to balance water chemistry. Always follow chemical manufacturer's instructions.
6.2 Cleaning
- Skim the surface of the pool daily to remove leaves and debris.
- Brush the pool walls and bottom weekly to prevent algae growth.
- Vacuum the pool floor as needed to remove settled debris.
6.3 Pool Cover Use
- Use the included pool cover when the pool is not in use to keep out debris, reduce evaporation, and maintain water temperature.
6.4 Draining and Storage (Winterization)
- At the end of the swimming season, drain the pool completely. Connect a garden hose to the drain valve for controlled drainage.
- Clean and dry the pool liner and frame thoroughly before disassembling.
- Store all components in a dry, protected area, away from extreme temperatures and pests.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water is cloudy | Poor filtration, unbalanced chemicals, high organic load | Check pump/filter, test and adjust chemicals, shock treat pool |
| Algae growth | Low chlorine, high pH, poor circulation | Shock treat, brush pool, add algaecide, ensure pump runs sufficiently |
| Pump not filtering effectively | Clogged filter sand, air in system, pump malfunction | Backwash filter, check connections for air leaks, consult pump manual |
| Water level dropping | Evaporation, leak in liner or connections | Monitor evaporation, inspect liner for punctures (use repair kit), check pump connections |
8. User Tips
- Consider purchasing a pool vacuum or robotic cleaner for easier maintenance.
- Always have a supply of essential pool chemicals on hand.
- For prolonged periods of non-use, ensure the pool is covered to keep it clean.
- Regularly inspect the steel frame for any signs of rust or damage, especially at connection points.
9. Warranty and Support
For warranty information, technical support, or to order replacement parts, please refer to the contact details provided with your purchase documentation or visit the official Avenli website. Keep your proof of purchase for warranty claims.