1. Introduction
The ANDELI MCT-416P is a versatile 4-in-1 multiprocess welder designed for a wide range of welding and cutting applications. This single machine combines MIG (Gas/No Gas), Plasma Cutting, LIFT TIG, and MMA (ARC) functions, making it suitable for various materials and working environments. Featuring full digital control technology, it offers strong welding performance for carbon steel, stainless steel, alloy steel, galvanized steel, and can also cut different metal materials.
2. Safety Information
Always prioritize safety when operating welding and cutting equipment. Failure to follow safety precautions can result in serious injury or death. This machine is equipped with a patented HRD electric shock protection function for enhanced safety.
General Safety Guidelines:
- Wear appropriate personal protective equipment (PPE) including welding helmet, gloves, protective clothing, and safety shoes.
- Ensure adequate ventilation to avoid inhaling fumes.
- Keep a fire extinguisher nearby.
- Do not operate in wet conditions or near flammable materials.
- Always disconnect power before performing maintenance or changing accessories.
- Ensure proper grounding of the equipment.
- Read and understand all instructions before use.
3. Package Contents
The ANDELI MCT-416P Multiprocess Welder package typically includes the following items:

- ANDELI MCT-416P Main Unit
- Gas Pipe
- Ground Clamp
- MMA Holder
- Air Pressure Regulator
- Knurl Groove Drive Roller
- Hose Hoop
- Pneumatic Joint
- Hose Barb
- Graphene Liner
- Gas Hose for MIG Welding
- TIG Torch
- Power Adapter Cord
- Plasma Cutting Torch
- MIG Gun
4. Product Overview and Panel Introduction
The MCT-416P features a user-friendly interface with a large 5-inch LED digital display for easy parameter adjustment and real-time display of welding current. A transparent protective cover shields the display from sparks and debris, ensuring enhanced visibility in harsh environments.

Panel Components:
- Input Voltage Selector (110V/220V)
- MIG Parameters Adjustment
- Torch Process Methods Selection
- Wire Diameter Selection
- Voltage Display Area / Current Display Area
- MMA Parameters Adjustment
- Material/Gas Selection
- Modes Selection (HF CUT, HF TIG, PULSE MIG, SYN MIG, MAN MIG, MMA)

5. Setup
Before operating the welder, ensure proper setup for your desired welding or cutting process.
5.1. Power Connection
- The MCT-416P supports dual voltage (110V/220V). Select the appropriate input voltage using the selector on the front panel.
- Connect the power adapter cord to a suitable power outlet.
5.2. Ground Clamp Connection
- Attach the ground clamp securely to the workpiece or welding table. Ensure good electrical contact.
5.3. MIG Welding Setup
- Wire Installation: Install the appropriate welding wire (Φ 0.8 or Φ 1.0, 1kg or 5kg spool) into the wire feeder. For aluminum-magnesium welding, use a 100mm disc of 1.0mm wire or a 200mm disc of aluminum-magnesium welding wire with the single pulse function.
- MIG Gun Connection: Connect the MIG gun to the designated port on the front panel.
- Gas Connection (for Gas Shielded MIG): Connect the gas hose from your CO2 or mixed gas cylinder to the gas inlet on the machine. Ensure the gas regulator is properly installed and set to the correct pressure.
- Gas-Free Flux Cored Welding: No external gas cylinder is required for flux-cored welding.
5.4. MMA (Stick) Welding Setup
- Connect the MMA holder to the positive (+) terminal and the ground clamp to the negative (-) terminal (or vice-versa, depending on electrode polarity requirements).
- Insert the desired electrode (1.6mm, 2.0mm, or 3.2mm) into the MMA holder.
5.5. TIG Welding Setup
- Connect the TIG torch to the appropriate terminal (usually negative for DC TIG) and the ground clamp to the positive terminal.
- Connect the gas hose from your argon cylinder to the gas inlet.
- Ensure a tungsten electrode is correctly installed in the TIG torch.
5.6. Plasma Cutting Setup
- Connect the plasma cutting torch to the designated port.
- Connect an external air compressor to the air inlet on the machine. Ensure the air pressure regulator is set correctly.
6. Operating Instructions
Once the machine is set up, you can begin operation. Use the LED display and control knobs to select and fine-tune parameters.
6.1. General Operation
- Turn on the power switch.
- Use the mode selection knob to choose your desired process (MIG, TIG, MMA, CUT).
- Select the material type and wire/electrode diameter using the corresponding controls.
- Adjust the welding current/voltage and other parameters as needed for your application. The 5-inch LED screen will display real-time values.
6.2. MIG Welding
- Select 'SYN MIG' for synergistic MIG, 'MAN MIG' for manual MIG, or 'PULSE MIG' for pulse MIG.
- For gas-shielded MIG, ensure gas flow is active.
- For aluminum-magnesium welding, utilize the single pulse function for optimal results.
- The machine supports 2T (non-self-lock) for quick fixes and tacking, and 4T (self-lock) for production welding or critical welds requiring consistency.
6.3. MMA (Stick) Welding
- Select 'MMA' mode.
- Adjust the current based on the electrode size and material thickness.
- The adjustable Hot Start function enhances arc ignition, and the adjustable Arc Force Current helps stabilize the arc during voltage fluctuations.
6.4. TIG Welding
- Select 'HF TIG' for high-frequency arc striking TIG welding.
- This mode is suitable for welding stainless steel above 0.8mm and 0.8mm sheet steel material.
- Ensure proper gas shielding with argon.
6.5. Plasma Cutting
- Select 'HF CUT' mode.
- Ensure the external air compressor is connected and supplying adequate air pressure.
- The HF pilot arc ignition facilitates easy starting of the cut.
- The machine can cut various metals with a thickness range of 1mm to over 25mm.

6.6. Parameter Fine-Tuning
The machine allows for fine-tuning of various parameters to achieve optimal results:
- Slow wire feeding time
- Reburn time
- Pre-gas time
- After-gas time
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your ANDELI MCT-416P welder.
- Cleaning: Keep the machine clean and free from dust and debris. Use compressed air to blow out internal components periodically.
- Fan System: The intelligent fan system activates automatically based on real-time temperature monitoring, ensuring precise cooling. Ensure the fan vents are not obstructed.
- Cable Inspection: Regularly inspect all cables, torches, and clamps for wear, damage, or loose connections. Replace any damaged components immediately.
- Storage: Store the welder in a dry, clean environment when not in use.
8. Troubleshooting
If you encounter issues with your welder, consider the following common troubleshooting steps:
- No Power: Check the power cord connection, wall outlet, and circuit breaker. Ensure the input voltage selector is set correctly.
- No Arc/Weak Arc: Verify ground clamp connection, electrode/wire installation, and gas flow (if applicable). Check welding parameters on the LED display.
- Poor Weld Quality: Adjust welding parameters (current, voltage, wire speed), ensure proper material preparation, and check for correct gas shielding.
- Overheating: Allow the machine to cool down. Ensure fan vents are clear and the intelligent fan is operating.
- Error Codes: Refer to the specific error codes displayed on the LED screen and consult the full manual for detailed solutions.
9. Specifications
Below are the key technical specifications for the ANDELI MCT-416P Multiprocess Welder:

| Feature | Specification |
|---|---|
| Model | MCT-416P |
| Functions | MIG (CO2/MIX/FLUX), TIG (HF), PULSE, MMA, CUT |
| Input Voltage | 110V/220V Dual Voltage |
| Rated Output Current | 160A (MIG/MMA/TIG), 40A (CUT) |
| Cutting Thickness (Clean) | 110V: 10mm (0.39"), 220V: 15mm (0.60") |
| Cutting Thickness (Max) | 110V: 15mm (0.60"), 220V: 18mm (0.71") |
| Welding Material Thickness | 1-8mm |
| MIG Wire Compatibility | Φ 0.8, Φ 1.0 (1kg and 5kg spools) |
| MMA Electrode Compatibility | 1.6mm, 2.0mm, 3.2mm |
| Material | High strength steel |
| DIY Supplies Category | Electrical |
| Certification | CE |
| Insulation Grade | F |
| IP Rating | IP21S |
| Cooling Mode | Fan Cooling |
| Package Weight | 22.0 kg |
| Package Dimensions | 22cm (L) x 22cm (W) x 11cm (H) |
10. Warranty & Support
The ANDELI MCT-416P Multiprocess Welder comes with a two-year warranty and free replacement parts. For any issues or guidance, please contact customer service. Returns and exchanges are available within 30 days of receiving the goods.
