HGLRC Rekon7 PRO V2

Contents

HGLRC Rekon7 PRO V2 7-inch FPV Long Range Frame Kit User Manual

Model: Rekon7 PRO V2 | Brand: HGLRC

1. Introduction

The HGLRC Rekon7 PRO V2 is a high-performance 7-inch FPV long-range frame kit designed for enthusiasts seeking durability, stability, and advanced features for extended flight missions. This manual provides essential information for assembly, operation, and maintenance of your frame kit.

Key Features:

  • Enhanced Stability: Unique triangular reinforcement rib structure provides a more stable platform for flight and improved noise suppression.
  • Robust Camera Protection: The front section incorporates CNC aluminum parts, offering superior protection for your camera lens while maintaining aesthetic appeal.
  • Customizable Aesthetics: Features customizable colorful RGB lighting effects to personalize your drone's appearance.
  • Optimized Antenna Design: Equipped with a detachable, vertically mountable antenna design, ensuring compatibility with the latest ELRS dual-frequency receivers for a more stable and reliable flight link.

2. Package Contents

Please inspect the package carefully to ensure all components are present and undamaged. If any parts are missing or damaged, please contact your retailer.

Exploded view of HGLRC Rekon7 PRO V2 frame components and accessories

Figure 2.1: Exploded view of frame components and included accessories.

Included Components:

  • HGLRC Rekon7 PRO V2 Frame (main structure)
  • 2mm Bottom Plate (x1)
  • 2mm Top Plate (x1)
  • 3mm Middle Plate (x1)
  • Front Arms (x2)
  • Rear Arms (x2)
  • Foot Pads (x4)
  • Camera Vibration Damping Pads L/R (x2)
  • 915MHz Antenna Mount (x1)
  • Heatsink (x1)
  • Front Bumper Protector (x1)
  • 3-in-1 3D Printed Part (x1)
  • Frame Limiter (x1)
  • Camera Mount (x1)
  • Anti-Spark Module (x1)
  • Cable Management Clip (x1)
  • XT60EW-M Male Plug Connector (x1)
  • Adapter (x1)
  • Anti-Slip Pad (x1)
  • Dual Antenna Mount (x1)
  • Power Cable (x2)
  • PVC Transparent Black Wire Sleeve (x4)
  • Double-ended 4-pin Cable (x2)
  • Double-ended 6-pin Cable (x1)
  • CNC Nose Piece L/R (x2)
  • Battery Strap 20x280mm (x2)
  • Screws and Fasteners (various sizes, included in accessory kit)

3. Specifications

Detailed specifications for the HGLRC Rekon7 PRO V2 frame kit are provided below:

HGLRC Rekon7 PRO V2 Frame Specification Diagram

Figure 3.1: Detailed specifications of the frame.

FeatureDetail
Frame ModelHGLRC Rekon7 PRO V2 frame
Frame Type7-inch Frame
Top Plate Thickness2mm
Middle Plate Thickness3mm
Bottom Plate Thickness2mm
Arm Thickness6mm
Frame Wheelbase324mm
FC Mounting Holes30.5mm*30.5mm*M3 / 20mm*20mm*M3
VTX Mounting Holes25.5mm*25.5mm*M2 / 20mm*20mm*M2 / 30.5mm*30.5mm*M3
Motor Mounting Holes19mm*19mm*M3
Camera Mounting Spacing19-20mm
Overall Dimensions254mm*341mm
Frame Weight (bare)383g ±5g (includes antenna mounts, screws, anti-slip pads)
MaterialComposite Material
Recommended Age14+ years
Battery RequirementNo Battery (frame kit only)
Packaging dimensions and total weight of the HGLRC Rekon7 PRO V2 frame kit

Figure 3.2: Packaging dimensions and total weight.

4. Setup and Assembly

This section outlines the general steps for assembling your HGLRC Rekon7 PRO V2 frame kit. Please refer to the exploded view (Figure 2.1) for component identification. Assembly requires basic tools for FPV drone building (e.g., hex drivers, soldering iron for electronics, etc.).

4.1 Frame Assembly

  1. Begin by attaching the arms (Front Arms x2, Rear Arms x2) to the Bottom Plate (2mm) using the provided screws. Ensure proper orientation as shown in the exploded view.
  2. Secure the Middle Plate (3mm) to the assembled bottom section.
  3. Mount the Top Plate (2mm) to complete the main frame structure.
  4. Attach the Foot Pads (x4) to the underside of the arms.
  5. Install the CNC Nose Pieces (L/R x2) at the front of the frame, which also serve as part of the camera protection.
  6. Integrate the Side Plates (L/R x2) into the frame structure.

4.2 Component Mounting

  • Flight Controller (FC) & Electronic Speed Controller (ESC): Utilize the designated FC Mounting Holes (30.5mm*30.5mm*M3 or 20mm*20mm*M3) on the middle plate. Ensure proper isolation and secure mounting.
  • Video Transmitter (VTX): Mount your VTX using the VTX Mounting Holes (25.5mm*25.5mm*M2, 20mm*20mm*M2, or 30.5mm*30.5mm*M3).
  • Motors: Attach your motors to the Arm Thickness (6mm) using the Motor Mounting Holes (19mm*19mm*M3).
  • Camera: Install your FPV camera using the Camera Mount and secure it within the Camera Mounting Spacing (19-20mm). The CNC aluminum front section provides additional protection. Use Camera Vibration Damping Pads if desired.
  • Antenna: The frame features a detachable, vertically mountable antenna design. Install your 915MHz antenna mount and/or Dual Antenna Mount as needed. This design is optimized for ELRS dual-frequency receivers.
  • Battery: Secure your battery using the provided Battery Straps (20x280mm x2) and Anti-Slip Pad. Connect the XT60EW-M Male Plug Connector to your power distribution system.
  • Cable Management: Use the Cable Management Clip and PVC Transparent Black Wire Sleeves to keep wiring neat and secure.
  • RGB Lighting: If utilizing the customizable RGB lighting, ensure proper connection to your flight controller or dedicated RGB controller.
Front view of the assembled HGLRC Rekon7 PRO V2 FPV frame

Figure 4.1: Assembled frame, front view.

Angled view of the assembled HGLRC Rekon7 PRO V2 FPV frame

Figure 4.2: Assembled frame, angled view.

Side view of the assembled HGLRC Rekon7 PRO V2 FPV frame

Figure 4.3: Assembled frame, side view.

5. Operating Instructions

The HGLRC Rekon7 PRO V2 is a frame kit, and its operation depends on the electronic components you install. This section provides general guidance related to the frame's features.

5.1 General FPV Flight

Once your electronic components (Flight Controller, ESCs, Motors, VTX, Receiver, Camera) are correctly installed, wired, and configured according to their respective manuals, the Rekon7 PRO V2 frame provides a stable and durable platform for long-range FPV flights. Ensure all connections are secure before each flight.

5.2 RGB Lighting

The frame supports customizable RGB lighting effects. Connect the RGB lighting elements to a compatible port on your flight controller or a dedicated RGB controller. Refer to your flight controller's software (e.g., Betaflight, ArduPilot) for configuration options to customize colors and patterns.

6. Maintenance

Regular maintenance will help ensure the longevity and optimal performance of your Rekon7 PRO V2 frame kit.

  • Pre-Flight Checks: Before each flight, visually inspect the frame for any cracks, loose screws, or signs of damage. Pay close attention to the arms and mounting points.
  • Cleaning: After flights, especially in dusty or dirty environments, clean the frame using a soft brush or compressed air to remove debris. Avoid using harsh chemicals that could damage the composite material.
  • Screw Tightness: Periodically check and tighten all screws, especially those securing the arms, top plate, and bottom plate. Vibrations during flight can cause screws to loosen over time.
  • Component Integrity: Ensure all mounted components (FC, VTX, motors, camera) are still securely attached and their wiring is intact and free from abrasion.
  • Antenna Inspection: Check the antenna mounts and antennas for any damage or bending, which could affect signal quality.

7. Troubleshooting

This section addresses common issues that may arise with an FPV frame kit. Since this is a frame, most issues will be mechanical or related to component mounting.

ProblemPossible CauseSolution
Excessive VibrationLoose screws, damaged arms, unbalanced propellers (if installed)Check and tighten all frame screws. Inspect arms for cracks. Ensure propellers are balanced and undamaged.
Components Not FittingIncorrect component size, incorrect mounting hardware, misaligned holesVerify component dimensions against frame specifications. Ensure correct screws and standoffs are used. Check for any manufacturing defects or debris in mounting holes.
Antenna Signal IssuesDamaged antenna, incorrect mounting, interferenceInspect antennas for physical damage. Ensure they are securely mounted and oriented correctly. Check for nearby electronic interference.
RGB Lights Not WorkingIncorrect wiring, software configuration issue, damaged LED stripVerify RGB wiring to the flight controller. Check flight controller software settings for RGB configuration. Inspect LED strip for physical damage.

8. User Tips

  • Loctite for Screws: For critical screws, especially those holding motors or arms, consider using a small amount of non-permanent threadlocker (e.g., blue Loctite) to prevent loosening from vibration.
  • Cable Management: Proper cable management not only makes your build look cleaner but also prevents wires from being cut by propellers or interfering with other components. Use zip ties and the provided cable management clips.
  • Component Layout: Plan your component layout carefully before final assembly to ensure optimal weight distribution and easy access for maintenance or future upgrades.

9. Warranty and Support

For any questions, technical assistance, or warranty claims regarding your HGLRC Rekon7 PRO V2 frame kit, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.