1. Product Overview
The SUITU 2-in-1 Car Jump Starter with Air Pump is an essential multifunctional device designed for vehicle owners. It combines a powerful car jump starter and an efficient digital tire inflator into a single, compact unit, providing reliable assistance for common roadside emergencies and routine vehicle maintenance.
This device eliminates the need to carry separate tools, offering convenience and peace of mind. It delivers strong current to safely start dead 12V car, truck, and motorcycle batteries, even in low temperatures. The built-in high-speed air compressor features a digital LCD display for real-time tire pressure monitoring and an auto-stop function to prevent over-inflation.
Its portable and durable construction, along with a complete accessory kit, makes it a versatile solution for emergency roadside assistance, daily tire maintenance, and charging electronic devices.

2. Package Contents
Please check the package contents upon unboxing to ensure all items are present:
- Main Unit (Host) x 1
- USB Charging Cable x 1
- Inflation Tube x 1
- Air Nozzles (Conversion Heads) x 4
- Smart Jumper Clamps x 1 set
- Storage Bag x 1

3. Specifications
| Feature | Specification |
|---|---|
| Brand | SUITU |
| Model | ST-9645 |
| Input | 5V=2A |
| Rated Voltage | 14.8V |
| Starting Current | 300A |
| Peak Current | 600A |
| Max Inflation Pressure | 150PSI |
| Measurement Accuracy | ±1.0PSI |
| Pressure Units | PSI, BAR, KPA, KG/CM² |
| Outer Air Tube Length | 350mm ± 10mm |
| Working Temperature | -20°C to 60°C |
| Product Dimensions | 190mm x 108mm x 55mm |
| Item Weight | 1150g |
| Number of Built-in Batteries | 2 |
| Battery Capacity | 5000 - 8000 mAh |

4. Key Functions and Interface
Familiarize yourself with the device's buttons and ports:
- Power Key: Turns the device on/off and starts/stops inflation.
- Setup Key (M): Activates the display and allows selection of pressure units.
- Increase (+) Key: Increases the target pressure value.
- Decrease (-) Key: Decreases the target pressure value.
- LED Light Key: Controls the emergency lighting modes (steady on, strobe, SOS).
- Digital Display Screen: Shows battery level, current pressure, and target pressure.
- Tire Inflation Interface: Port for connecting the inflation tube.
- USB 5V-2A Charging Output: For charging external electronic devices.
- Input 5V/2A: USB-C port for charging the jump starter itself.
- LED High Brightness Lighting: Integrated flashlight for emergency situations.
- Car Start Interface: Port for connecting the smart jumper clamps.

5. Jump Starter Function
5.1. Setup for Jump Starting
Before attempting to jump start a vehicle, ensure the SUITU device is sufficiently charged (above 75% battery level). Insufficient charge may prevent successful starting or damage the product.
- Connect Jumper Cables: Insert the smart jumper clamp plug fully into the "Car Start Interface" (Port 11) on the SUITU device.
- Connect to Car Battery:
- Attach the red clamp to the positive (+) terminal of the car battery.
- Attach the black clamp to the negative (-) terminal of the car battery.
Note: The smart clamps should light up green. If a red light appears, it indicates either insufficient device power or reversed polarity. Correct the polarity immediately or charge the device.
- Turn off Car Electronics: Before starting, ensure all electronic devices in the car (e.g., air conditioning, lights, entertainment system) are turned off to conserve battery power.


5.2. Operating the Jump Starter
- Start the Car: Turn the car key to the start position or press the car's engine start button.
- Disconnect Device: Once the car engine starts successfully, immediately unplug the jumper clamp connector from the SUITU device within 30 seconds.
- Remove Clamps: Then, remove the red and black clamps from the car battery terminals.
- Repeat if Necessary: If the car does not start on the first attempt, wait at least 1 minute before trying again. Do not attempt to start continuously for more than 5 seconds.
6. Tire Inflator Function
6.1. Setup for Tire Inflation
- Connect Inflation Tube: Screw one end of the inflation tube onto the "Tire Inflation Interface" (Port 7) of the SUITU device.
- Attach to Valve Stem: Screw the other end of the inflation tube onto the tire's valve stem. For French valve stems, use the appropriate conversion nozzle.

6.2. Operating the Tire Inflator
- Activate Device: Press the Power Key (Port 1) to activate the device and the LCD screen. The device will automatically shut off after 60 seconds of inactivity.
- Select Pressure Unit: Press the Setup Key (M) (Port 2) to cycle through and select your desired pressure unit (PSI, BAR, KPA, or KG/CM²).
- Set Target Pressure: Use the Increase (+) Key (Port 3) and Decrease (-) Key (Port 4) to set the target tire pressure. Short presses adjust slowly, while long presses adjust rapidly. The set value will flash for 5 seconds to confirm.
- Start Inflation: Press the Power Key (Port 1) again to begin inflation.
- Automatic Stop: The intelligent control system will automatically stop inflation once the preset target pressure is reached.
- Disconnect: After inflation, carefully check the temperature of the inflation tube. Once cooled, quickly unscrew the tube from the tire valve stem, then detach it from the main unit.
Ball Inflation: When using the air needle for ball inflation, ensure the needle is not fully inserted into the inflation hose. The needle tip should be flush with the hose opening to prevent blockage and ensure proper inflation.

7. Additional Functions
7.1. Power Bank Function
The SUITU device can also serve as a portable power bank to charge your electronic devices.
- Ensure the device is in a "black screen" (off) state.
- Connect your device's USB charging cable to the "USB 5V-2A Charging Output" (Port 8) on the SUITU device.
- Connect the other end of the cable to your phone, tablet, or other compatible electronic device.

7.2. Emergency Lighting
The integrated LED high-brightness lighting (Port 10) provides illumination for nighttime emergencies or low-light conditions.
- Press the LED Light Key (Port 5) to cycle through different lighting modes: steady on, strobe, and SOS.

8. Maintenance
- Storage: If the product will not be used for an extended period, store it in a dry place.
- Long-Term Charging: For long-term storage, it is recommended to charge the device every six months to maintain battery health.
- Pre-Use Check: Always check if the product is fully charged before each use.
- Charging Cable: Only use the dedicated charging cable provided with the product for recharging.
9. Troubleshooting
- Jumper Clamps Show Red Light: This indicates either insufficient power in the SUITU device or reversed polarity when connecting to the car battery.
- Solution: Charge the SUITU device immediately if power is low. Correct the connection of the red (+) and black (-) clamps to the car battery terminals.
- Car Does Not Start: If the car fails to start after an attempt.
- Solution: Wait at least 1 minute before making another attempt. Do not attempt to start continuously for more than 5 seconds. Ensure all car electronics are off.
- Abnormal Sound or High Temperature During Inflation:
- Solution: Immediately turn off the device. Allow it to cool down for at least 15 minutes before resuming use.
- Inflation Tube is Hot:
- Solution: Exercise caution when detaching the inflation tube after use, as it may be hot. Allow it to cool before handling.
10. User Tips
- Regular Charging: Always keep your SUITU device charged, especially before long trips, to ensure it's ready for any emergency.
- Tire Pressure Check: Make it a habit to check your tire pressure regularly using the device's digital inflator to maintain optimal driving safety and fuel efficiency.
- Nozzle Familiarity: Familiarize yourself with the different inflation nozzles for various items (balls, inflatable toys) to ensure proper and efficient inflation.
- Cold Weather Performance: The device is designed to operate in cold temperatures (-20°C), but ensuring it's fully charged will maximize its performance in extreme conditions.

11. Safety Precautions
WARNING: Failure to follow these safety instructions may result in fire, electric shock, or other injury or damage.
- Children: This product is not a toy. Keep it out of reach of children.
- Inflation Safety: Never insert the air hose into the mouth, ears, or eyes of people or animals.
- Flammable Environments: Do not use the product in areas with flammable or explosive liquids and gases, such as gas stations.
- Heat Generation: Inflation generates heat. To ensure proper function and extend product life, allow the device to rest for 10 minutes after every 15 minutes of continuous use. If you hear an abnormal sound or notice excessive temperature during inflation, immediately turn off the device and let it cool for at least 15 minutes. Be cautious when handling the inflation tube as it may be hot.
- Storage Conditions: Store the product in a dry place at temperatures between -10°C and 35°C. Avoid high temperatures and humid environments. Do not throw the product into fire, as it may cause an explosion. Keep away from heat sources and ensure adequate ventilation.
- Jump Starter Compatibility: The jump starter function is suitable for gasoline engines with a displacement of less than 3.5L. It is NOT suitable for diesel engines with a displacement greater than 1.2L.
- Thunderstorms: Disconnect any external chargers during thunderstorms to prevent damage from lightning strikes.
12. Warranty and Support
12.1. Situations Not Covered by Warranty Service
- Exceeding the warranty period.
- Lack of valid warranty certificate, invoice, or other valid sales proof.
- Warranty certificate model does not match the product model or has been altered.
- Damage caused by not using, maintaining, or caring for the product according to the instruction manual, or by using non-original accessories.
- Unauthorized repairs, alterations, misuse, collision, dropping, crushing, liquid ingress, or corrosion.
- Torn, altered, or unrecognizable product labels, seals, and serial numbers (SN).
- Damage caused by irresistible forces such as floods, fires, lightning strikes.
- Defects caused by normal wear and tear or normal aging of the product.
- Products not sold in mainland China.
12.2. Paid Service Guarantee
If the product does not meet the warranty conditions but requires repair, a suitable repair fee will be calculated based on parts and labor costs. A quotation will be provided, and upon your agreement, repair services will be rendered.
For further support, please refer to the official user manual PDF: SUITU User Manual (PDF)