intelamp YL005-16A

Contents

intelamp Solar Outdoor Light YL005-16A Instruction Manual

Model: YL005-16A

1. Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture beyond its IP65 rating.
  • Handle with care to avoid cuts or injuries.

WARNING: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with the applicable legal requirements.

2. Product Overview

The intelamp Solar Outdoor Light YL005-16A is a high-brightness, dual motion sensor flood security light with remote control, designed for outdoor use. It features a large solar panel, a high-capacity battery, and intelligent sensing capabilities for enhanced security and convenience.

Intelamp Solar Light Outdoor, main product view showing the solar panel, LED lights, and motion sensors.

Image: Intelamp Solar Light Outdoor, main product view showing the solar panel, LED lights, and motion sensors.

Key Features:

  • High-Brightness Long Illumination: 12500mAh battery, 3000LM brightness, providing 8-12 hours of nighttime lighting after 6-8 hours of sufficient sunlight.
  • Intelligent Mutual Control and Sensing: When one light is activated, it signals other intelamp solar lights within a 66ft (20m) radius to illuminate simultaneously.
  • Dual Sensing, Dual Light Surfaces: Equipped with 2 motion sensors for enhanced sensitivity and dual wide-angle illumination faces offering a 240° lighting angle.
  • Adjustable Solar Panel: The solar panel angle is adjustable in three levels to ensure optimal charging efficiency.
  • Durable and Waterproof: Made from high-quality ABS material with an IP65 waterproof rating, suitable for various outdoor weather conditions.

3. Setup and Installation

3.1 Unpacking and Initial Preparation

  • Carefully remove all protective films from the solar light casing and the solar panel.
  • Ensure the solar panel is unobstructed and free of stains for optimal charging.

3.2 Choosing an Installation Location

Select a well-lit, unobstructed location that receives direct sunlight for at least 6-8 hours daily. Recommended installation height is 1.8-2.5 meters (approximately 6-8 feet).

3.3 Installation Methods

The intelamp Solar Outdoor Light supports both wall and pole installations.

Diagram showing wall mounting and pole mounting options for the solar light.

Image: Diagram showing wall mounting and pole mounting options for the solar light. Wall installation requires drilling for mounting, while pole installation suits more scenarios and activities.

  • Wall Installation: Requires drilling for mounting. Secure the bracket to the wall using appropriate screws and anchors (not included).
  • Pole Installation: Suitable for various outdoor scenarios. Use appropriate clamps or straps (not included) to secure the light to a pole.

3.4 Adjusting the Solar Panel Angle

The solar panel angle is adjustable in three levels to ensure optimal charging efficiency. Adjust the panel to face direct sunlight for maximum exposure.

Video: Product demonstration showing intelligent sensing, linkage, dual illumination, dual sensors, adjustable solar panel, and installation methods.

4. Operating Instructions

4.1 Power On

Locate the power switch on the side or bottom of the light fixture. Switch it to the "ON" position to turn it on. For models supporting a light-controlled mode, switch it to the "Auto" position; the light will automatically turn on after dark and turn off at dawn.

4.2 Lighting Modes

A short press of the mode button (if available) cycles through different lighting modes:

  • Constant Light Mode: The light remains on at a steady brightness.
  • Flashing Mode: The light flashes intermittently.
  • Sensor Mode: The light automatically turns on to full brightness when it detects human activity and switches to a dim light or turns off after a 30-second delay when no one is around. This mode is energy-efficient.

4.3 Intelligent Sensing and Linkage

Diagram illustrating the intelligent mutual control sensor where one light activates others nearby.

Image: Diagram illustrating the intelligent mutual control sensor where one light activates others nearby. The light activates bright illumination upon detecting motion, automatically switching to dim light after the person leaves.

Image showing the intelligent linkage feature with 240° wide-angle lighting.

Image: Image showing the intelligent linkage feature with 240° wide-angle lighting. Once one light is triggered, others nearby also light up simultaneously.

The light is equipped with dual motion sensors covering a 180° sensing angle for larger detection and greater distance.

Diagram showing the dual sensors with a 180° sensing angle.

Image: Diagram showing the dual sensors with a 180° sensing angle.

5. Maintenance

5.1 Cleaning

  • Regularly clean the solar panel to ensure it is free of dust, dirt, and debris. A clean panel ensures optimal sunlight absorption and charging efficiency.
  • Wipe the light fixture with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.

5.2 Storage

If storing the light for an extended period, ensure it is fully charged, then turn it off and store it in a dry place, away from direct sunlight and extreme temperatures.

5.3 Longevity Tips

The design of the intelamp solar light, with its solar panel providing shade, helps reduce the lamp's temperature during hot summers, contributing to the extended lifespan of the battery and the product.

Image showing the solar panel providing shade to the light fixture, enhancing longevity.

Image: Image showing the solar panel providing shade to the light fixture, enhancing longevity.

6. Troubleshooting

  • Light not turning on at night: Ensure the power switch is in the "ON" or "Auto" position. Verify the solar panel is clean and receiving direct sunlight for at least 6-8 hours during the day. Check for any obstructions blocking sunlight.
  • Light is dim or short-lived: This usually indicates insufficient charging. Ensure the solar panel is clean and exposed to direct sunlight for the recommended duration. Cloudy weather or shaded installation can reduce performance.
  • Motion sensor not working: Check if the light is in sensor mode. Ensure there are no obstructions in front of the sensors. Test the sensor by moving within its detection range.
  • Intelligent linkage not working: Ensure all linked lights are within the 66ft (20m) radius and are powered on.

7. Specifications

FeatureSpecification
Model NumberYL005-16A
Brand Nameintelamp
Power SourceSOLAR
Battery Capacity3.2V/12500mAh (Lithium battery)
Brightness3000 lumen
Light SourceLED bulbs (142 pcs LED)
Charging Time6H (fully charged under sufficient sunlight)
Lighting TimeAbout 36H (actual duration depends on weather and sunlight intensity)
Protection LevelIP65 (Waterproof)
Body MaterialABS
Installation MethodSelf-contained (Wall/Pole mount)
Is DimmableYes
CertificationsCE, FCC, GS, LVD, ROHS, UL
Solar Panel5V/2000mA, 98 inch² (L13.4"*W7.3")
Product DimensionsL13.4" x W7.3" x H10.6" (approximate, based on images)
Detailed product dimensions and specifications table for Model YL005-16A.

Image: Detailed product dimensions and specifications table for Model YL005-16A.

Comparison table showing Intelamp's larger solar panel, battery, and higher brightness.

Image: Comparison table showing Intelamp's larger solar panel (98 in²), battery (12500 mAh), and higher brightness (3000 lumen) compared to other products.

8. Warranty and Support

8.1 Warranty

This product comes with a 1-year warranty.

8.2 Manufacturer Information

Manufacturer: Shenzhen Jindian Electronic Technology Co., Ltd.
Address: No. 9, Tianyang 1st Road, Datianyang Industrial Zone, Dongfang Community, Songgang Street, Bao'an District, Shenzhen City, Guangdong Province, China
Email: service@intelamp.com

8.3 EU Authorized Representative

Representative: SUCCESS COURIER SL
Address: CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain
Email: successservice2@hotmail.com

8.4 Additional Resources

For a detailed user manual in PDF format, please refer to the official document: User manual (PDF)

9. User Tips

  • For best performance, ensure the solar panel is angled directly towards the sun, especially during peak sunlight hours.
  • Consider installing multiple intelamp solar lights within the 66ft (20m) range to fully utilize the intelligent linkage feature for a seamlessly lit pathway.
  • In areas with frequent cloudy days, expect shorter illumination times at night due to reduced solar charging.
  • Regularly check and clean the motion sensors to ensure they remain sensitive and responsive.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.