1. Introduction
Congratulations on your purchase of the SNDWAY SW-523 or SW-524 Digital Sound Level Meter. This instrument is designed for precise measurement of sound levels in various environments. Please read this manual carefully to ensure proper and safe operation.
Image: SNDWAY SW-523/SW-524 Digital Noise Meter with Alarm Function.
2. Safety Instructions
2.1. Laser Safety
- Do not look directly at the laser when using this instrument at any time. The digital laser meter is a Class II laser product.
- Do not use this product with other optical products to avoid serious laser damage radiation.
- Do not damage any safety warning signs on the instrument.
2.2. Prohibited Actions
- Opening or repairing the instrument by yourself.
- Using the instrument directly in the sun.
- Using the instrument outside its specified scope.
- Immersing the instrument in water.
- Wiping the lens with organic solvent.
- Wiping the lens directly with your hands or other rough objects.
- Using a power supply outside the rated voltage.
2.3. General Cautions
- Do not use the instrument under unstable conditions.
- The instrument should be kept away from children.
- Do not try to disassemble or modify this instrument, as it may cause laser emission power increase, leading to unnecessary personal injury.
- Keep this manual for future inquiry.
- It is recommended to use 1.5V AAA batteries.
3. Package Contents
The package typically includes:
- SNDWAY Digital Sound Level Meter (SW-523 or SW-524 model)
- User Manual
- Sponge ball (windscreen)
- USB cable (for SW-524 only)
- (Batteries are not included. Requires 3x 1.5V AAA batteries.)
Video: Product demonstration showing the device, its features, and how to use it for noise measurement.
4. Product Overview
The SNDWAY Digital Sound Level Meter features a clear display and intuitive controls. Below is a diagram highlighting the main components and buttons.
Image: Labeled diagram of the SW-524 Sound Level Meter, showing the sponge ball, condenser microphone sensor, 1.62 inch display, MAX/MIN key, A/C key, FAST/SLOW key, power switch key, backlight display, and dimensions.
4.1. Key Functions
- Power Switch Key (
): Turns the instrument on/off. - MAX/MIN Key: Toggles between maximum and minimum measured values.
- A/C Key: Switches between A-weighting and C-weighting frequency characteristics.
- FAST/SLOW Key: Selects the response time (Fast or Slow).
- Backlight Key: Activates/deactivates the display backlight.
- Up/Down Arrow Keys: Used for navigation or setting alarm limits (SW-524 only).
Image: Close-up of the HD Backlit Display, showing a 1.62-inch high-definition energy-saving screen for clear visibility.
5. Setup
5.1. Battery Installation
- Open the battery cover on the back of the device.
- Install or replace three (3) 1.5V AAA alkaline dry batteries according to the polarity marks inside the battery compartment.
- Close and fasten the battery cover securely.
Cautions:
- Use batteries from regular manufacturers.
- Do not use old and new batteries together.
- When the instrument shows low battery, replace the batteries promptly.
- Remove the batteries if the instrument will not be used for a long period.
- Waste batteries should be recycled according to relevant national or local regulations.
6. Operation
6.1. Power On/Off
- Press the
key to turn on the instrument. The backlight will activate, and it will automatically switch to single measurement mode. - Long press the
key for 2 seconds to turn off the instrument. - The instrument will automatically turn off the laser beam after 30 seconds of inactivity, and power off completely after 3 minutes of inactivity.
6.2. Basic Measurement
Once powered on, the device will start displaying the current sound level. Ensure the sponge ball is attached to the microphone sensor to reduce wind noise.
6.3. MAX/MIN Measurement
Press the MAX/MIN button to cycle through the current, maximum (MAX), and minimum (MIN) sound level readings recorded during the measurement session.
6.4. A/C Weighting Selection
Press the A/C button to switch between A-weighting and C-weighting:
- A-weighting (dBA): Simulates the human ear's response to sound, suitable for ambient noise measurement.
- C-weighting (dBC): Provides a flatter response, suitable for measuring mechanical noise or peak sound levels.
Image: Illustration of A-weighted (ambient noise) and C-weighted (mechanical noise) measurement characteristics.
6.5. Response Time Selection
Press the FAST/SLOW button to select the response time:
- FAST: For quick changes in sound levels (125ms response time).
- SLOW: For average sound levels over time (1s response time), providing a more stable reading.
Image: Demonstrates the fast response time of 125ms in TAST mode.
6.6. Backlight Display
Press the backlight key to turn the display backlight on or off for better visibility in different lighting conditions.
7. Data Management (SW-524 Only)
The SW-524 model offers advanced features including data storage, time display, alarm function, and computer communication via MicroUSB.
7.1. Data Storage and Query
- The instrument automatically stores measurement data.
- To query stored data: In the initial state, press the function key 5 times to enter data query mode. Use the up/down arrow keys to browse measured values.
- The device can continuously store data for 17 hours at 1 stroke/second.
7.2. Computer Communication
The SW-524 can communicate with a computer via a MicroUSB cable to download and store records, perform real-time sampling, and print data.
Image: USB cable connection to computer for data communication, showing the software interface for real-time monitoring and data analysis.
Image: Screenshot of the NoiseMeter 1.0 software interface, demonstrating USB connection status and real-time data monitoring with graphs and tables.
7.3. Alarm Function (SW-524 Only)
A high limit alarm can be set on the SW-524. If the measured sound level exceeds this limit, the instrument will automatically issue an alarm sound for real-time monitoring.
Image: Visual representation of customizing an alarm upper limit value.
8. Specifications
Below are the technical parameters for the SNDWAY SW-523 and SW-524 models:
| Feature | SW-523/SW-524 |
|---|---|
| Accuracy | ±1.5dB (at reference sound pressure level, 94dB@1kHz) |
| Frequency Response | 31.5Hz~8.5KHz |
| Dynamic Range | 50dB |
| Measuring Range | 30~130dBA / 35~130dBC |
| Frequency Weighting Characteristics | A-weight and C-weight |
| Digital Display | 4 digits, resolution 0.1dB, sampling frequency 2 times/second (SW-523: 3 and a half) |
| Dynamic Scale Display | 30~130dB (1 scale represents 2dB or 1dB) |
| Overload Indication | “OVER” and “UNDER” Symbolic representation |
| AC Signal Output | Yes |
| DC Signal Output | Yes |
| Response Time | FAST (fast) and SLOW (slow) |
| Microphone | 6mm condenser microphone |
| Size Value Lock | MAX and MIN |
| Battery | 3x 1.5V AAA (not included) |
| Working Temperature and Humidity | 0~40℃, 10~80%RH |
| Storage Temperature and Humidity | -10~60℃, 10~70%RH |
| Time Display | Yes (SW-524 only) |
| Storage Function | 1 stroke/second, continuously stored for 17 hours (SW-524 only) |
| Communicate with Computer | Via MicroUSB (SW-524 only) |
| Alarm Function | High limit alarm can be set (SW-524 only) |
| Size | 215mm*63.5mm*27mm |
Image: Detailed comparison of features between SW-523 and SW-524 models.
Image: Diagram showing the dual analog signal output ports (DC and AC) for connecting to external devices.
9. Troubleshooting
If you encounter any issues, refer to the table below for common error codes and their solutions.
| Error Code | Cause | Solutions |
|---|---|---|
| Er101 | Low power | Replace the battery |
| Er104 | The error between the measured distance and the actual 1m distance should be less than or equal to 9mm | Re-measurement |
| Er108 | Calculation error | Re-measurement |
| Er155 | 1m correction error | Re-measurement |
| Er157 | Out of range | Please range the target within the range |
| Er159 | The signal is too weak or the ambient light is too strong | Use high reflectivity reflectors |
| Er194 | Out of range of numerical display | Measure within the range of numerical display |
10. Maintenance
- Do not immerse the instrument in water.
- Clean dirt with a damp soft cloth.
- Do not use aggressive cleaning agents or solutions.
- Store the device in a dry, cool place when not in use.
Image: The device features a double injection molding case, making it drop-proof (1.5m anti-drop), waterproof, and dust-proof.
11. User Tips
- For optimal accuracy, ensure the microphone is clear of obstructions and the sponge ball is properly fitted to reduce wind interference.
- When measuring in environments with high background noise, consider using the C-weighting setting for a more direct measurement of sound pressure.
- Utilize the MAX/MIN function to capture transient noise peaks or to determine the lowest noise level over a period.
12. Warranty and Support
The company provides a free warranty for users within one year from the date of purchase. The conditions for the validity of this warranty service are as follows: operate, handle, clean, and maintain the tool correctly according to the company's operating instructions, and maintain the tool in good technical condition. This means that only our original parts and spare parts can be used in the tools. This warranty only provides free repair or replacement of defective parts throughout the expected life of the tool. If parts need to be repaired or replaced due to normal wear and tear, they are not covered by this warranty. All pictures, descriptions, and technical parameters are subject to change without prior notice.
For further assistance or to view the full item guides and documents, please refer to the official PDF manual: View User Manual (PDF).