svbony TransAir (ST2)

Contents

Svbony ST2 HD Wireless HDMI Extender Kit User Manual

Model: TransAir (ST2)

1. Introduction and Overview

The Svbony ST2 Wireless HDMI Transmitter and Receiver is a portable, plug-and-play wireless HDMI extender kit designed for seamless video and audio transmission. It eliminates the need for HDMI cables, offering a convenient solution for streaming content from various devices to monitors, TVs, or projectors.

Key features include:

  • Wireless Transmission: Utilizes 5G technology for fast, stable, and long-distance transmission.
  • High Definition Output: Supports 4K decoding with 1080P output at 60Hz for crisp and vivid images.
  • Ultra-Low Latency: Achieves transmission latency of less than 0.1 seconds.
  • OLED Color Display: A 0.42-inch OLED screen provides real-time feedback on connection status, signal strength, channel, and video output.
  • Multi-Channel Support: Offers 9 selectable 5G frequency bands (5.1 to 5.8 GHz) for optimal signal stability.
  • Wide Compatibility: Compatible with devices such as laptops, PCs, TV boxes, projectors, monitors, cameras, tablets, and smartphones (devices must support HDMI transmission).
Svbony ST2 Wireless HDMI Extender Kit with key features: 5G Chip, 9 Channels, 1080P, OLED, 50-80m range.

Figure 1: Svbony ST2 Key Features

Diagram showing TX connected to laptop and RX connected to TV, illustrating 5G wireless transmission with low latency.

Figure 2: 5G Wireless Video Transmission System with Low Latency

Icons representing compatible devices: TV, Monitor, Projector, Laptop, Camera, Tablet, Smartphone, Switch.

Figure 3: Compatible Devices

Video 1: Svbony ST2 Product Demonstration

2. Setup Instructions

Follow these steps to set up your Svbony ST2 Wireless HDMI Extender Kit:

  1. Connect the Transmitter (TX): Plug the transmitter unit (marked 'TX') into the HDMI output port of your source device (e.g., laptop, PC, TV box). Ensure it is securely connected.
  2. Power the Transmitter (TX): Connect the transmitter to a power source (at least 5V/2A) using the provided USB-C power cable.
  3. Connect the Receiver (RX): Plug the receiver unit (marked 'RX') into the HDMI input port of your receiving device (e.g., TV, LED screen, projector).
  4. Power the Receiver (RX): Connect the receiver to a power source (at least 5V/2A) using the provided USB-C power cable.
  5. Verify Connection: Once both units are powered and connected, they will automatically pair. The OLED display on both units will show the connection status, signal strength, and resolution.

Using Adapters: The kit includes Mini HDMI and Micro HDMI adapters, as well as a Type-C to HDMI cable, to ensure compatibility with a wide range of devices. Use the appropriate adapter if your source device does not have a standard HDMI output.

Diagram showing Step 1: Plug TX into laptop and power it. Step 2: Plug RX into TV and power it. Step 3: Connection successful.

Figure 4: Installation Steps

Image showing Mini HDMI adapter, Micro HDMI adapter, Type-C to HDMI cable, and USB-C data cable.

Figure 5: Included Adapters and Cables

3. Operating Instructions

The Svbony ST2 is designed for plug-and-play operation. Once connected and powered, it will automatically establish a wireless link and begin transmitting video and audio.

  • OLED Display: The 0.42-inch OLED screen on both the transmitter and receiver provides crucial operational information. It displays the current channel (CH1 in the example), signal strength, and image quality (e.g., 1080P60). It also indicates connection status, such as 'NO TX' (no transmitter signal) or 'NO RX' (no receiver signal).
  • Channel Selection: The device operates on 5GHz frequency bands, offering 9 channels (CH0-CH8) to ensure stable transmission and avoid interference. The system automatically selects the best channel, but manual selection might be possible in some scenarios (refer to the full PDF manual for advanced settings).
  • Transmission Range: The system supports an ultra-long transmission range of 50-80 meters (164-262.4 feet) in open areas, adapting to various settings like classrooms, conference rooms, or home entertainment setups.
OLED display showing CH1, signal strength, and 1080P60 image quality, with indicators for NO TX and NO RX.

Figure 6: OLED Display Feedback

Comparison of 5G and 2.4G channels, highlighting the stability of 9 5GHz channels.

Figure 7: 9 5GHz Channels for Stable Signal

Illustration of 50-80m ultra-long range transmission in a conference room setting.

Figure 8: 50-80m Ultra-Long Range Transmission

4. Maintenance

To ensure the longevity and optimal performance of your Svbony ST2 Wireless HDMI Extender Kit, please follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the exterior of the transmitter and receiver units. Avoid using liquid cleaners or abrasive materials.
  • Storage: When not in use, store the devices in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Handle the units with care to prevent physical damage. Avoid dropping or subjecting them to strong impacts.
  • Power Supply: Always use the recommended 5V/2A USB-C power supply to prevent damage to the devices.

5. Troubleshooting

If you encounter issues with your Svbony ST2, refer to the following common problems and solutions:

ProblemPossible CauseSolution
No signal/No displayUnits not powered, incorrect HDMI connection, out of range, interference.Ensure both TX and RX are powered (5V/2A). Check HDMI connections. Move units closer. Check OLED display for 'NO TX' or 'NO RX' indicators. Try a different 5G channel.
Flickering or unstable imageWeak signal, interference, device compatibility.Reduce distance between TX and RX. Ensure no obstructions. Try a different 5G channel. Verify source/display device compatibility.
No audioAudio settings on source/display, HDMI cable issue.Check audio output settings on your source device and input settings on your display. Ensure HDMI cables are fully inserted.
OLED display shows 'NO TX' or 'NO RX'Transmitter/Receiver not connected or powered, pairing issue.Ensure the indicated unit is properly connected to its source/display and powered. Restart both units.

For more detailed troubleshooting or advanced settings, please refer to the complete user manual PDF available at: Svbony ST2 User Manual (PDF).

6. Specifications

FeatureSpecification
Model NumberTransAir (ST2)
Brand Namesvbony
TypeWIFI
Resolution1080P60, 1080P30, 1080P25, 720P60
Speed5G
Transmission Distance50-80m (164ft - Max 262.4ft)
Size74mm * 24mm * 13mm
Screen0.42-inch OLED Color Display
Power SupplyType-C 5V/2A
Operating Temperature-10°C to 50°C
Weight40g/pair (Transmitter + Receiver)
PackageYes
Image showing the compact size of the transmitter and receiver units (74x24x13mm) and their light weight (40g/pair).

Figure 9: Compact Design and Dimensions

7. User Tips

  • For optimal performance, ensure a clear line of sight between the transmitter and receiver, especially for longer distances.
  • While the signal can penetrate walls, heavy obstructions or multiple walls may reduce the effective transmission range and signal quality.
  • Always use the provided USB-C cables and a stable 5V/2A power adapter for both units to prevent power-related issues.
  • If experiencing interference, try changing the 5G channel. This can often resolve connectivity or stability problems.

8. Warranty and Support

Svbony products are designed for reliability and performance. For any warranty claims or technical support, please contact Svbony customer service directly through their official website or the retailer where the product was purchased.

Please retain your proof of purchase for warranty validation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.