PowMr POW-SunSmart 16KP

Contents

PowMr POW-SunSmart 16KP Hybrid Solar Inverter User Manual

Model: POW-SunSmart 16KP

1. Introduction

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your PowMr POW-SunSmart 16KP Hybrid Solar Inverter. This advanced inverter is designed to integrate solar power, battery storage, and grid/generator power, offering flexible and reliable energy solutions for various applications. Please read this manual thoroughly before installation and operation to ensure optimal performance and safety.

2. Safety Information

Always observe the following safety precautions to reduce the risk of electric shock, fire, or injury:

  • Read all instructions and cautionary markings on the unit and in this manual before operation.
  • Do not disassemble the inverter. Refer servicing to qualified personnel.
  • Ensure all wiring is performed by a qualified electrician and complies with local and national electrical codes.
  • Disconnect all power sources (PV, battery, grid, generator) before performing any maintenance or wiring.
  • The inverter is designed for indoor use only (IP20 Protection Degree). Do not expose it to rain, snow, or liquids.
  • The unit features a built-in circuit breaker for enhanced safety. Do not bypass or tamper with safety features.
  • Ensure proper ventilation around the inverter to prevent overheating.

3. Product Overview

The PowMr POW-SunSmart 16KP is a high-performance hybrid solar inverter offering robust features for modern energy systems.

Front view of the PowMr POW-SunSmart 16KP Hybrid Solar Inverter

Figure 3.1: Front view of the PowMr POW-SunSmart 16KP Hybrid Solar Inverter

Key Features:

  • Flexible Application:
    • Supports up to 6 units in parallel, scalable to 96 kW.
    • Supports PV only and hybrid charging modes.
    • Independent generator port with smart load compatibility.
    • Supports single-phase 120V / split-phase 240V output.
  • High Yield:
    • Dual high-efficiency MPPT inputs with up to 99% conversion efficiency.
    • Maximum input current of 36A per MPPT.
    • Wide MPPT voltage range: 120Vdc–600Vdc.
  • Easy Operation & Monitoring:
    • Supports WIFI module connection for APP-based remote monitoring.
    • Time-sharing charging/discharging and energy saving mode.
    • Dual activation function for lithium batteries.
  • Safe & Reliable:
    • External load anti-backflow protection.
    • Built-in circuit breaker for enhanced safety.
    • Comprehensive protection design.

4. Specifications

Detailed technical specifications for the POW-SunSmart 16KP inverter are provided below:

Category Parameter Value
GeneralModel NumberPOW-SunSmart 16KP
PV InputNo. Of MPPT2
Max. PV Array Input Power12000W+12000W
Max. PV Array Input Current36A+36A
PV Array MPPT Voltage Range120Vdc~600Vdc/120Vdc~600Vdc
Max. PV Array Open Circuit Voltage650Vdc/650Vdc
Input Voltage48V
TypeDC/AC Inverters
AC InputInput Voltage Range85Vac~140Vac
Nominal Input Frequency50Hz/60Hz
Bypass Overload Current (Grid)100A
Bypass Overload Current (Generator)66.67A
AC OutputRated Output Power16000W
Output Frequency50Hz/60Hz
Nominal Output Voltage120V/240V (L1+L2+N+PE)
BatteryBattery TypeLi-ion / Lead-acid / User-defined
System Voltage48V
Max. Grid/Generator Charging current300A
Max. Charging/Discharging Current300A
Physical & EnvironmentalDimension (D×W×H)514*848.7*190mm (20.24*33.41*7.48in)
Protection DegreeIP20 Indoor Only
Parallel Capacity1~6 Units
Detailed view of the PowMr POW-SunSmart 16KP Hybrid Solar Inverter with dimensions

Figure 4.1: Detailed view of the inverter, showing dimensions and connection points.

5. Installation

5.1 Pre-installation Checklist

  • Verify package contents against the packing list.
  • Inspect the unit for any physical damage.
  • Ensure the installation location is indoors, well-ventilated, and free from moisture, dust, and corrosive gases.
  • Confirm sufficient clearance around the inverter for cooling.

5.2 Mechanical Installation

Mount the inverter securely on a vertical surface capable of supporting its weight. Use appropriate mounting hardware. Refer to the dimensions provided in the specifications section for planning.

5.3 Electrical Connections

All electrical connections must be made by a certified professional. Ensure all circuits are de-energized before making connections.

  • PV Array Connection: Connect your solar panels to the designated PV input terminals. The inverter supports dual MPPT inputs with a wide voltage range (120Vdc-600Vdc).
  • Battery Connection: Connect the 48V battery bank (Li-ion, Lead-acid, or user-defined) to the battery terminals. Observe correct polarity.
  • AC Input (Grid/Generator): Connect the utility grid or a compatible generator to the AC input terminals. The inverter supports 85Vac-140Vac input.
  • AC Output (Load): Connect your loads to the AC output terminals. The inverter provides 120V/240V (L1+L2+N+PE) single/split phase output.
  • Grounding: Ensure the inverter is properly grounded according to local electrical codes.
Diagram of a typical home solar energy system showing connections between solar panels, inverter, battery, utility grid, and smart home monitoring.

Figure 5.1: Typical Solar Energy System Diagram

5.4 Parallel Operation

The POW-SunSmart 16KP inverter supports parallel operation of 1 to 6 units, allowing for a scalable system up to 96 kW. Consult the detailed parallel installation guide (usually provided separately or via video) for specific wiring and configuration instructions for multi-unit setups.

Example installation of multiple PowMr inverters mounted on a wall

Figure 5.2: Example of a multi-unit inverter installation.

6. Setup and Configuration

6.1 Initial Power-Up

After all connections are secure and verified, follow the power-up sequence outlined in the detailed installation guide. Typically, this involves connecting the battery first, then PV, and finally the AC input.

6.2 Battery Type Setting

Configure the inverter for your specific battery type (Li-ion, Lead-acid, or user-defined) via the inverter's display interface or the monitoring APP. Correct battery settings are crucial for proper charging and discharge management.

6.3 Lithium Battery Activation

The inverter includes a dual activation function for lithium batteries. Refer to the specific instructions for your lithium battery model and the inverter's menu for proper activation procedures.

6.4 Remote Monitoring (WIFI Module)

Connect the optional WIFI module to the inverter to enable APP-based remote monitoring. Follow the instructions provided with the WIFI module to connect it to your local network and register the inverter with the PowMr monitoring application. This allows for real-time system status, performance data, and remote control.

7. Operating Instructions

7.1 Charging Modes

The inverter supports both PV-only and hybrid charging modes. Select the appropriate mode based on your energy requirements and available power sources. Hybrid mode allows for intelligent management of solar, battery, and grid/generator power.

7.2 Time-Sharing Charging/Discharging

Utilize the time-sharing function to program specific charging and discharging periods. This feature is useful for optimizing energy usage, taking advantage of off-peak electricity rates, or prioritizing solar power during certain hours.

7.3 Energy Saving Mode

Activate the energy saving mode to reduce the inverter's power consumption during periods of low load or when the system is not actively producing or consuming significant power. This helps to maximize overall system efficiency.

8. Maintenance

Regular maintenance ensures the longevity and optimal performance of your inverter:

  • Cleaning: Periodically clean the inverter's exterior with a dry, soft cloth. Ensure ventilation openings are free from dust and debris. Do not use liquid cleaners.
  • Connections Check: Annually, inspect all electrical connections for tightness and signs of corrosion.
  • Environmental Check: Ensure the installation environment remains within specified temperature and humidity ranges and is free from obstructions.
  • Firmware Updates: Check for available firmware updates via the remote monitoring APP or PowMr's official website to ensure your inverter has the latest features and bug fixes.

9. Troubleshooting

If you encounter issues with your inverter, refer to the following general troubleshooting steps. For detailed guidance, PowMr provides comprehensive English teaching manuals and videos covering disassembly, assembly, and operation.

Common Issues:

  • No Power/Display:
    • Check battery connections and voltage.
    • Verify AC input power (grid/generator).
    • Ensure the built-in circuit breaker is not tripped.
  • Low Output Power:
    • Check PV array performance (shading, dirt on panels).
    • Verify battery charge level.
    • Ensure loads do not exceed the inverter's rated output.
  • Error Codes on Display:
    • Note down the specific error code.
    • Consult the detailed troubleshooting section in the full user manual or contact technical support with the error code.
  • WIFI Module Connectivity Issues:
    • Ensure the WIFI module is properly installed and powered.
    • Check your local network connection and router settings.
    • Verify correct registration with the monitoring APP.

For further assistance, refer to the comprehensive support resources or contact PowMr technical support.

10. User Tips

Here are some tips to get the most out of your PowMr Hybrid Solar Inverter:

  • Optimize Panel Placement: Ensure your solar panels are optimally angled and free from shading throughout the day to maximize energy harvest.
  • Monitor Performance Regularly: Use the remote monitoring APP to keep track of your system's performance, identify any anomalies, and ensure efficient operation.
  • Battery Management: If using user-defined battery settings, ensure they are accurately configured for your battery type to prolong battery life and performance.
  • Plan for Peak Loads: Understand your household's peak energy consumption times and configure time-sharing modes to efficiently manage battery discharge and grid interaction.

11. Warranty and Support

PowMr products are manufactured with a commitment to quality and adhere to international standards. The POW-SunSmart 16KP inverter holds multiple certifications including CE, IEC, EMC, VDE, LVD, and EN50549, ensuring compliance and reliability.

Various certifications for PowMr products, including CE and quality management system certificates.

Figure 11.1: PowMr Product Certifications

For technical support, warranty claims, or any inquiries, please contact PowMr customer service through the following channels:

  • WhatsApp: +86 18900786512
  • Email: 3509534322@qq.com
  • WeChat: +8618900786512

Please have your product model and serial number ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.