1. Introduction
Thank you for choosing the AULA SC311 Tri-Mode Wireless Gaming Mouse. This manual provides detailed instructions on how to set up, operate, and maintain your new gaming mouse. Please read this manual carefully before use to ensure optimal performance and longevity of your device.
Figure 1: AULA SC311 Tri-Mode Wireless Gaming Mouse
2. Key Features
- Tri-Mode Connectivity: Supports Bluetooth, 2.4GHz Wireless, and Type-C Wired connections.
- High Precision Sensor: Wolf Spider Custom Sensor with up to 10000 DPI (6-speed adjustment).
- High Polling Rate: Up to 1000Hz report rate for smooth and precise control.
- Ergonomic Design: Self-developed mold structure for optimal grip (grip, palm, finger).
- Long-lasting Battery: Built-in 500mAh lithium battery.
- RGB Lighting: Dynamic RGB lamp effects that change with DPI switch.
- Lightweight: Approximately 76g (bare unit).
- 6 Programmable Keys: For enhanced gaming and productivity.
3. Setup and Connection
The AULA SC311 mouse offers three versatile connection methods:
Figure 2: Tri-Mode Connection Options
3.1. Bluetooth Connection Method
- Slide the power switch on the bottom of the mouse down to the Bluetooth mode position. The Bluetooth indicator will light up.
- Briefly press the function key (located on the bottom of the mouse) to switch between Bluetooth Channel 1 or 2.
- Press and hold the function key for 3 seconds until the indicator flashes rapidly, indicating pairing mode.
- On your device (computer, laptop, tablet), search for Bluetooth devices and select "AULA-SC311" (default name, may be editable).
- Click to connect. The indicator light on the mouse will stay on for 3 seconds, confirming a successful Bluetooth connection.
3.2. 2.4GHz Wireless Connection Method
- Slide the power switch on the bottom of the mouse upward to the 2.4G mode position. The 2.4G red indicator will flash slowly.
- Press and hold the function button for 3 seconds; the indicator will enter a fast-flashing pairing mode.
- Plug the 2.4G USB receiver (stored in the mouse's receiver storage bin) into an available USB port on your computer.
- The indicator light on the mouse will stay on for 3 seconds and then turn off, indicating a successful 2.4G wireless connection.
3.3. Wired Connection Method (Type-C)
To use the mouse in wired mode, simply connect the mouse to your computer using a USB Type-C cable. The mouse will automatically switch to wired mode and begin charging if necessary.
3.4. Mouse Layout and Buttons
Figure 3: Mouse Button Functions and Bottom Switches
- Left Button: Standard left-click function.
- Right-click: Standard right-click function.
- Middle Key (Scroll Wheel): Scroll up/down, middle-click.
- DPI Button: Cycles through DPI settings.
- Forward Key: Navigates forward in browsers/applications.
- Back Key: Navigates backward in browsers/applications.
- RGB Lighting: Customizable lighting effects.
- Mode Switching/Switch (Bottom): Toggles between connection modes (Bluetooth, 2.4G, Wired).
- Switch Bluetooth Channel (Bottom): Selects between Bluetooth Channel 1 or 2.
- Receiver Storage Bin (Bottom): Compartment for the 2.4G USB receiver.
4. Operating Instructions
4.1. DPI Adjustment
The mouse features a 6-speed DPI adjustment. Press the DPI button (located behind the scroll wheel) to cycle through the available DPI settings: 400-800-1600-3200-5000-10000. The RGB lighting effect may change with the DPI switch, providing a visual indicator.
Figure 4: DPI Adjustment and RGB Lighting
4.2. Report Rate Adjustment
The mouse supports different report rates depending on the connection mode:
- 2.4G Mode: 125Hz/250Hz (default)/500Hz. To switch to 1000Hz, press and hold the middle right button for 3 seconds.
- Bluetooth Mode: 125Hz
- Wired Mode: 1000Hz
Figure 5: 1000Hz Reporting Rate for Enhanced Performance
4.3. Sleep Mode
The mouse is designed with power-saving sleep modes:
- Level 1 Light Sleep: The mouse enters light sleep after 15 seconds of inactivity. It wakes up on movement or any button press.
- Deep Sleep: The mouse enters deep sleep after 20 minutes of inactivity. It wakes up only on a button press.
4.4. Charging Indicator
- Charging Light: The indicator light will be red while charging and will turn off when fully charged.
- Low Battery: The indicator light will flash red when the voltage is below 3.3V, signaling that the mouse needs to be charged.
Figure 6: Battery Capacity and Life
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the mouse. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the device.
- Storage: When not in use for extended periods, store the mouse in a cool, dry place.
- Battery Care: Avoid fully discharging the battery frequently. Charge the mouse when the low battery indicator flashes.
- Avoid Extreme Conditions: Do not expose the mouse to extreme temperatures, direct sunlight, or high humidity.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mouse not responding | Low battery; Incorrect connection mode; Pairing issue (2.4G/Bluetooth); USB receiver not plugged in (2.4G); Cable issue (Wired). |
|
| Lag or intermittent connection | Interference; Distance from receiver/device; Low battery. |
|
| DPI or RGB not changing | Button not pressed correctly; Software conflict. |
|
| Mouse not charging | Faulty cable; Faulty USB port; Mouse not connected properly. |
|
7. Specifications
Figure 7: Configuration, Performance, and Appearance Specifications
| General | |
|---|---|
| Product Name | AULA SC311 Tri-mode Mouse |
| Key Quantity | 6 Keys |
| Charging Interface | USB-C |
| Product Weight | Approx. 76g (bare unit) |
| Mouse Dimensions | 112 x 70 x 39mm |
| Product Compatibility | Supports Windows 7/8/10 and other operating systems. |
| Performance | |
| DPI | 400-800-1600-3200-5000-10000 (6-speed adjustment) |
| Report Rate (2.4G) | 125Hz/250Hz (default)/500Hz, 1000Hz (switch by holding middle right button for 3S) |
| Report Rate (Bluetooth) | 125Hz |
| Report Rate (Wired) | 1000Hz |
| Acceleration | 50 G |
| Power | |
| Battery Capacity | Built-in 500mAh lithium battery |
| Charging Voltage/Current | DC5V 180mA |
| Operating Voltage | DC+3.7-5V |
| Operating Current | ≤20-25mA (During operation) at DC+3.7V |
| Standby Time | Approx. 120 Hours |
| Battery Life Time | Approx. 20 Hours |
8. User Tips
- Optimal Grip: Experiment with different grip styles (grip, palm, finger) to find what feels most comfortable for your hand size and gaming style. The mouse's self-developed mold structure is designed to accommodate various grips.
- DPI Customization: Utilize the 6-speed DPI adjustment to match your sensitivity preferences across different games or tasks. Lower DPI for precision aiming, higher DPI for faster cursor movement.
- Polling Rate for Gaming: For competitive gaming, ensure you are using the 1000Hz report rate in 2.4G wireless or wired mode for the lowest latency and smoothest tracking.
- Battery Management: To maximize battery life, remember to switch off the mouse when not in use for extended periods, or rely on its intelligent sleep modes.
9. Warranty and Support
For detailed warranty information and customer support, please refer to the official AULA website or contact your retailer. Keep your purchase receipt as proof of purchase.
A comprehensive user manual in PDF format is also available for download. You can access it via the following link: AULA SC311 User Manual (PDF).