1. Product Overview
The LiTime 36V 50Ah Bluetooth LiFePO4 Battery is a high-performance lithium iron phosphate battery designed for various applications, particularly marine trolling motors. It features intelligent Bluetooth 5.0 monitoring, a robust 50A Battery Management System (BMS), and long-lasting EV grade A cells.
Figure 1: LiTime 36V 50Ah LiFePO4 Battery
Key Features:
- Intelligent Bluetooth 5.0 Monitoring: Real-time status monitoring via the LiTime app, offering simple QR code connection, offline management, and simultaneous monitoring of multiple battery systems.
- High Energy Density: 57.93 Wh/lb, providing more power for extended operating times compared to conventional batteries.
- Comprehensive 50A BMS Protection: Reliably protects against moisture, over/under voltage, short circuits, and includes low-temperature cut-off protection.
- Flexible Current Output: Maximum continuous discharge current of 50A, with short-term peaks up to 60A for 30 minutes.
- Expandable Power: Can be expanded to a 36V 200Ah (7.68 kWh, 7.68 kW) system to meet individual energy needs.
- Long-lasting EV Grade A Cells: High-quality cells with a lifespan of up to 10 years and over 4000 charge cycles.
- Certifications: FCC, CE, RoHS, UN38.3 certified, and compliant with UL-1973 standard.
Figure 2: Internal structure showing EV Grade A LiFePO4 cells and Smart 50A BMS
2. Setup and Connection
2.1 Additional Components
The battery comes with M8-5/8" (16MM) terminal bolts and insulating caps for bolts.
- M8-5/8" (16MM) Terminal Bolts: Used to secure multiple cable lugs to a single battery terminal. Recommended terminal torque: 106.2 to 123.9 inch-lbs / 12 to 14 N·m. These bolts can be replaced with M8 bolts of other lengths based on actual needs.
- Insulating Caps for Bolts: Cover the battery with the insulating caps after tightening the bolts. If a cap melts, discontinue use and contact customer service for analysis.
2.2 Parallel Connection
To connect multiple batteries in parallel, ensure the following conditions are met:
- Batteries must be identical in capacity (Ah) and BMS (A).
- All batteries must be from the same brand (lithium batteries from different brands may have incompatible BMS).
- Batteries should be purchased around the same time (within one month).
The system supports connecting up to 4 identical batteries in parallel for a maximum 36V (38.4V) 200Ah battery system.
Figure 3: Parallel Connection Diagram (Series connection is NOT supported)
2.3 Charging
The recommended charging specification is CC/CV at 43.2 ± 0.6 V with a current of 10A (0.2C). To activate the battery, simply connect the recommended LiTime 43.8V 10A charger.
Figure 4: Charging Methods
3. Operating Instructions
3.1 Bluetooth Monitoring
Utilize the LiTime app for intelligent Bluetooth 5.0 monitoring. The app allows you to check the battery's data and status, monitor the battery system, supervise individual batteries, and diagnose battery faults remotely. Ensure to connect the charger to turn on the battery upon initial use or after manually powering off.
Figure 5: LiTime App for Battery Status Monitoring
3.2 Temperature Range and Low Temperature Charging Protection (LTCP)
The battery operates within specific temperature ranges:
- Charging: 0°C to 50°C (32°F to 122°F)
- Discharging: -20°C to 60°C (-4°F to 140°F)
- Storage: -10°C to 50°C (14°F to 122°F)
The battery features Low Temperature Charging Protection (LTCP). The BMS intelligently interrupts the charging process when the battery temperature falls below 0°C/32°F and resumes charging when the temperature rises above 5°C/41°F, protecting the battery's health.
Figure 6: Low Temperature Protection Mechanism
3.3 Applications
This battery is ideal for various applications, including:
- Marine Trolling Motors (up to 120 lb thrust)
- Solar Backup Systems
- Off-grid Applications
- General backup power
Figure 7: Diverse Applications
4. Maintenance
LiFePO4 batteries generally require minimal maintenance. However, following these guidelines can help ensure optimal performance and longevity:
- Regular Inspection: Periodically check the battery terminals for any signs of corrosion or loose connections. Ensure all connections are clean and securely tightened to the recommended torque.
- Storage: If storing the battery for an extended period, ensure it is charged to approximately 50% State of Charge (SOC) and stored within the recommended temperature range of -10°C to 50°C (14°F to 122°F).
- Avoid Deep Discharge: While LiFePO4 batteries are robust, avoiding consistent deep discharges can prolong their lifespan.
- Charging Practices: Always use a charger specifically designed for LiFePO4 batteries with the correct voltage and current specifications.
5. Troubleshooting
What to do when the battery stops working?
If the battery is not working, cannot be charged, or its voltage drops below 27V, there is an 85% chance that the BMS has shut it off for protection. You can try the following steps to reactivate it:
- Step 1: Cut off all connections from the battery.
- Step 2: Leave the battery aside for 30 minutes. The battery should automatically recover to a normal voltage (>30V) and can then be used after being fully charged.
If the battery is unable to recover itself after the above steps, try activating it using one of the following two methods:
- Method 1: Use a charger with a lithium battery activation function to fully charge the battery.
- Method 2: Connect a controller that supports 36V LiFePO4 battery charging to charge the battery for 3-10 seconds in sunny daytime conditions.
Once activated (voltage > 30V) and fully charged by the normal charging method, the battery can be used normally.
Figure 8: Key Features and Protections
6. Specifications
| Parameter | Value |
|---|---|
| Cell Type | LiFePO4 |
| Nominal Voltage | 38.4V |
| Rated Capacity | 50Ah |
| Energy | 1920Wh |
| Internal Resistance | ≤ 40mΩ |
| Cycle Lifespan | ≥ 4000 cycles at 100% DOD, 6000 cycles at 80% DOD, 15,000 cycles at 60% DOD |
| BMS Board | 50A |
| Charge Method | CC/CV |
| Charging Voltage | 43.2V ± 0.6V |
| Recommended Charge Current | 10A (0.2C) |
| Max. Continuous Charge Current | 50A |
| Max. Continuous Discharge Current | 50A (60A for 30 minutes) |
| Max. Discharge Current (Surge) | 250A for 1 second |
| Max. Continuous Output Power | 1920W |
| Max. Thrust Power | 120lb |
| Dimension (L x W x H) | 330 x 172 x 216 mm (13 x 6.77 x 8.5 inches) |
| Housing Material | ABS |
| Protection Class | IP65 |
| Temperature Range (Charge) | 0°C to 50°C (32°F to 122°F) |
| Temperature Range (Discharge) | -20°C to 60°C (-4°F to 140°F) |
| Temperature Range (Storage) | -10°C to 50°C (14°F to 122°F) |
| Low Temperature Charging Protection (LTCP) | Yes |
| Resume Charging Temperature Under LTCP | 5°C/41°F (Battery Temperature) |
| Properties | Bluetooth, low temperature protection |
Figure 9: Battery Dimensions
7. User Tips
- Charger Compatibility: Always use a charger specifically designed for 36V LiFePO4 batteries. Using an incompatible charger can damage the battery or prevent proper activation.
- Not for Starting: This battery is designed for deep cycle applications and is not suitable for use as a starter battery for engines.
- App Connectivity: If you experience issues with Bluetooth connectivity, ensure the battery has been recently charged or connected to a charger to activate its system.
- PDF Manual: For a comprehensive guide, you can refer to the official user manual PDF available at LiTime 36V 50Ah User Manual (PDF).
8. Warranty and Support
For any issues, questions, or further analysis, please contact LiTime customer service at service@litime.com.
The product is MLF-verified and holds FCC, CE, RoHS, UN38.3 certifications, and complies with the UL-1973 standard, ensuring high quality and safety.