HORLAT T03MAX

Contents

HORLAT T03MAX Google TV Projector User Manual

Model: T03MAX

This manual provides essential instructions for the safe and efficient use of your HORLAT T03MAX Google TV Projector.

1. Important Safety Instructions

Thank you for purchasing the HORLAT T03MAX projector. Please read this manual thoroughly before using and keep it for future reference. The warranty does not apply if physical injury, loss of data, or damage is caused by failure to follow these instructions.

1.1. Set Up

  • Do not install the projector in places without proper ventilation.
  • Do not install the projector in hot, humid, dusty, or smoky places.
  • Do not block the ventilation holes (intake or exhaust).
  • Do not install the projector near temperature and smoke detectors, as it may cause sensor failure.
  • Avoid installing the projector in areas where warm and cool air will blow directly onto it, as this may cause projector failure due to moisture condensation or large temperature changes.

1.2. Power Supply

  • Power off the device before removing the power supply from the socket.
  • Use the power cord with caution to avoid unduly bending it. Damaged power cords may cause electric shock or fire.
  • Unplug this device if there are lightning storms or when unused for a long period of time.
  • Never touch the power cable or connection with wet hands.
  • Unplug the power cord from the outlet after using the projector.

1.3. Caution

  • Do not look at the lens directly, as it may cause severe eye injury.
  • During and after use, the temperature near the air outlet will rise; avoid touching it to prevent burns.
  • Do not place the projector in a room that is too warm or too cold (working temperature: 5°C-35°C), as extreme temperatures can shorten the device's lifespan.

2. Packing List

Ensure all items are present in the package:

  • 1x Projector
  • 1x Remote Control (Batteries not included)
  • 1x HDMI Cable
  • 1x AV Cable
  • 1x Power Cable
  • 1x User Manual
HORLAT T03MAX Projector Packing List

Image: Contents of the HORLAT T03MAX Projector package.

3. Product Overview

Familiarize yourself with the projector's components and ports:

HORLAT T03MAX Projector Ports and Controls Diagram

Image: Front, rear, side, and bottom views of the projector with labeled components.

3.1. Front/Side View

  1. Focus Lens
  2. Adjusting Knob
  3. IR receiver (Front)
  4. 3.5mm port for audio output
  5. AV port
  6. Speaker
  7. IR receiver (Rear)
  8. Removable dust cover

3.2. Rear View

  1. Switch of Removable Dust Cover
  2. USB port
  3. HDMI 1 port
  4. HDMI 2 port
  5. Power Switch
  6. Focussing ring
  7. Removable dust cover

3.3. Bottom View

  1. Adjusting Knob (Lifting nut)

4. Remote Control

The remote control allows for easy navigation and function access:

HORLAT T03MAX Remote Control Diagram

Image: Labeled diagram of the remote control buttons.

  1. Power Switch
  2. Voice remote control button
  3. Menu Button
  4. Confirm Button
  5. Direction Buttons
  6. Back Button
  7. Home Button
  8. Volume+
  9. Volume-
  10. Mute
  11. Signal Source
  12. Set up
  13. Projection Settings
  14. Lens Forward
  15. Lens Backward
  16. Enter with one click

5. Setup

5.1. Projector Placement

The projector can be placed on a table, mounted on the ceiling, or used for back projection. Ensure proper ventilation and distance from walls (at least 30 cm).

Projector Placement Example

Image: The HORLAT T03MAX projector on a stand, projecting a Google TV interface.

5.2. Ceiling Installation

  1. Purchase a universal projector ceiling mount.
  2. Remove the four rubber pads on the bottom of the projector to reveal the screw holes.
  3. Use M4*10mm screws to install the projector onto the ceiling mount.

5.3. Power On

  1. Plug the power cord into an outlet.
  2. Remove the lens cover.
  3. Press the power button on the projector or remote control to turn on the projector.

5.4. Projector Distance & Size

The recommended projection screen is around 80 inches with a projection distance of approximately 8.92 ft (2.72m). Ambient darkness will improve the clarity of the projected images.

Aspect Ratio (16:9) Projection Chart
DistanceScreen Size (inch)
5.11ft (1.56m)50
8.20ft (2.50m)80
10.26ft (3.13m)100
12.33ft (3.76m)120
15.41ft (4.70m)150
20.5ft (6.27m)200

6. Operation

6.1. Adjusting the Projected Image (Autofocus)

After adjusting the size and distance, if the image is unclear, press the 'F+' or 'F-' buttons on the remote control to adjust until a clear image is obtained. The projector features intelligent AI automatic screen optimization.

Auto Focus and Auto Keystone Correction Diagram

Image: Diagram illustrating Auto Focus and Automatic Keystone Correction features.

6.2. Auto Obstacle Avoidance (Autofocus)

  1. Use the 'Projection Settings' button on the remote control to select 'Advanced Settings'.
  2. Select 'Automatic Obstacle' in the 'Advanced Settings' column. The projector will refocus and automatically avoid obstacles by shrinking the display screen.

6.3. Auto Access Screen (Autofocus)

  1. Use the 'Projection Settings' button on the remote control to select 'Advanced Settings'.
  2. Select 'Automatic screen entry' in the 'Advanced Settings' column. The projector will refocus, and the screen size will be adjusted to fit the screen.

Note:

  • The projection surface (curtain) needs to have a black border for successful automatic entry.
  • When automatic screen entry is active, ensure the corners of the projection are within the screen area.

6.4. Manual Four-Point Keystone Correction

  1. Use the 'Projection Settings' button on the remote control to select 'Advanced Settings'.
  2. Select 'Image Correction' in the 'Advanced Settings' column. Press the 'Confirm' key to enter manual key correction.
  3. Use the remote control's direction keys to zoom the screen size. Press the 'Confirm' key to switch to the next corner for adjustment.

Note:

  • The projection screen can only be reduced, not enlarged. If the screen cannot be covered, move the projector back.
  • After adjusting the screen, turn off autofocus and auto trapezoid in advanced settings.

6.5. Input Source

6.5.1. HDMI Mode
  1. Connect the projector and your equipment with an HDMI cable.
  2. Press and hold the 'Source' button on the projector or remote control to enter the input source interface and select HDMI.
  3. Select the HDMI input (HDMI1 or HDMI2) corresponding to your connection. Press 'OK' to enter, then 'Return' to exit and return to the main interface.
6.5.2. AV Mode
  1. Connect the projector and your equipment with an AV cable.
  2. Press and hold the 'Source' button on the projector or remote control to enter the input source interface.
  3. Select 'AV'. Press 'OK' to enter, then 'Return' to exit and return to the main interface.
6.5.3. USB Mode
  1. Connect a USB disk to the projector. The USB disk will be highlighted on the main projection screen.
  2. Select the corresponding file type (Movie, Music, Picture, Office Suite) and press 'OK' to enter the file browser.

6.6. Screen Mirroring

  1. Connect your phone and the projector to the same Wi-Fi network.
  2. For Apple (iOS) devices: Swipe up on your iPhone to enter the options interface. Tap the screen mirror icon, select the projector name (e.g., 'TV Stick'), and then tap 'Connect'.
  3. For Google (Android) devices: Swipe down on your Google phone to enter the options interface. Select 'Screen Cast', select the projector name (e.g., 'TV Stick'), and then tap 'Connect'.

6.7. Bluetooth Mode (Connecting to External Speakers)

  1. Use the remote control or the projector button to enter the projector's settings interface.
  2. Find 'Bluetooth settings' in the settings interface. Press 'OK' to enter.
  3. Select 'Add accessory'. A list of Bluetooth devices will be displayed.
  4. Select your Bluetooth speaker from the device list to connect, then press 'OK' to pair.
  5. After successful connection, the Bluetooth device will show as 'Connected'.

7. Maintenance

7.1. Repairs

  • Never attempt to repair the projector yourself.
  • No components in the projector can be repaired by customers.
  • Please entrust qualified professional maintenance personnel for any repairs.

7.2. General Care

  • Keep the projector clean and free from dust. Regularly clean the lens with a soft, lint-free cloth.
  • Ensure the removable dust covers are clean and properly installed to prevent dust accumulation.

8. Troubleshooting

Q1. Blurry Image

  • Make sure the projection distance is farther than the minimum projection distance of 1.5 m.
  • Adjust the focus ring.

Q2. The projector image shows no signal

  • Please make sure all cables are connected to the projector properly and stably.
  • Check whether the projector input source mode has been selected as the corresponding format (e.g., if connected via HDMI, select HDMI input).

Q3. Remote Unresponsive

  • Make sure the remote points directly at the IR receiver.
  • Do not cover the IR receiver.
  • Try a new pair of AAA batteries.

Q4. The projector stops automatically after a period of time

  • Check if the projector's air inlet and outlet are blocked by other objects.
  • Pay attention to whether the local mains voltage is too low, too high, or fluctuates too much.

9. Specifications

FeatureSpecification
Display TechnologyLCD
Light SourceLED
Aspect Ratio16:9/4:3/Auto
FocusManual (Autofocus supported)
Keystone Correction±30° (Manual, Electronic, Auto Correction)
Projection ModeThrowing, Ceiling, Back Projection, Mirror Image
Speaker5W*2 (Built-in Speaker)
Power SupplyAC100-240V, 50/60Hz
Unit Dimension256.9*219.6*101.5 mm
Weight3.1KG
Photo Format SupportedJPG/JPEG/PNG/BMP
Audio Format SupportedMP3/AAC/FLAC/OGG/WAV/WMA/MID/DTS/M4A
Video Format Supported3GP/AVI/FLV/MP4/MPG/VOB/TS/M2TS/RMVB/MKV
Input/Output PortsHDMI*2, USB 2.0*1, 3.5mm Earphone Out, AV
Optical Resolution1920x1080dpi
Brightness40000 Lumens (2000 ANSI Lumens)
Projected Dimension50-300 inches
Projection Distance1.5-9m
SystemAndroid (Google TV Official Integrated)
WiFiWiFi 6 (Dual-band 2.4/5GHz)
BluetoothBluetooth 5.3
Remote Controller IncludedYes
Inbox AdaptorYes
CertificationsCE, FCC, RoHS, UL, WEEE

10. Warranty and Support

The HORLAT T03MAX projector comes with a 1-year warranty. The advanced LED light source lamp has a lifespan of up to 100,000 hours, and its diffuse reflection imaging design helps protect your eyes.

For further assistance or detailed documentation, you can refer to the official user manual PDF available at: User manual (PDF).

If you encounter any problems with your projector, please contact customer support for a quick and effective solution.

11. User Tips

  • For optimal image quality, ensure your projection surface is smooth and light-colored.
  • Utilize the Google Intelligent Voice Assistant for hands-free control and quick access to apps and content.
  • Experiment with different projection distances to find the ideal screen size for your viewing environment.
  • Take advantage of the AI Auto Focus and Auto Keystone Correction features for quick and easy setup.
  • When using screen mirroring, ensure both your device and the projector are connected to the same Wi-Fi network for a stable connection.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.