1. Product Information
The Xhorse MultiProg is a professional-level programmer designed for advanced automotive diagnostics and programming tasks. It serves as the second generation of the VVDI Prog, offering enhanced capabilities for reading, writing, and cloning Engine Control Units (ECUs) and Transmission Control Units (TCUs).
Key features include:
- ECU Read, Write, and Clone: Supports a wide range of ECUs including BMW B48/B58 (ISN reading), BMW MSD80/81/85/87/MSV90, Mercedes-Benz SIM271, VW BOSCH MED17 Series, BMW N13/N20/N55/B38/TC17X, and various Marelli, Siemens, Delphi ECUs.
- TCU Read, Write, and Clone: Compatible with Volkswagen Audi Skoda DQ200, DQ250, VL381 TCUs, Porsche DL501 TCU, Ford Dodge and MPS6 series TCUs, BMW DKG, and Mercedes-Benz VGS TCUs.
- Vehicle Engine Data Calculation and Processing: Specifically supports MED17/EDC17 data processing.
- Flexible Extension of Third-party Plug-ins: Allows for the development and integration of third-party plug-ins for data processing and modification services.
- MCU Read and Write: Supports MCUs from various brands like Renesas, Motorola, NXP, Infineon, including certain encrypted chips.
- Vehicle Immo Module Read and Write: Supports Porsche, LandRover, Mercedes-Benz EZS, VOLVO, VW MQB dashboard, AUDI BCM2, BMW EWS, CAS1/CAS2/CAS3/CAS4+, FEM BDC, and other common immo modules. Compatible with Xhorse solder-free adapters and cables.
- EEPROM and FLASH Read & Write: Comprehensive support for EEPROM and FLASH memory operations.
- Vehicle Dashboard Read & Write: Supports dashboards for VW, Honda, Hyundai, Kia, and more.
The MultiProg also includes an MQB48 license, which can be bound with a user's Xhorse VVDI2 or Key Tool Plus account to enable MQB48 functions on those devices.
Video: Xhorse MultiProg Product Overview, showcasing its features and capabilities.
2. Safety & Warnings
! Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Electrical Safety: Ensure the vehicle is turned off, in Park (P) gear, and with the parking brake engaged before operation.
- Operational Safety: Do not move the vehicle or perform other repairs during diagnostics.
- Equipment Safety: Connect an external regulated power supply during programming/coding to prevent voltage fluctuations.
- Data Safety: Always back up original data before any modification operations.
- Prohibited Uses: Strictly prohibited for illegal activities such as odometer tampering or accident data deletion.
- Permitted Uses: Limited to vehicle diagnostics, repairs, maintenance, and authorized programming/calibration.
- Liability: Users assume full responsibility for consequences of operation. Professional technicians are recommended to perform procedures.
3. Setup and Connection
Follow these steps to connect the MultiProg programmer to a vehicle or component:
- Locate the Vehicle's OBD Port: This is typically found under the driver's side dashboard.
- Connect Diagnostic Cable: Connect the appropriate diagnostic cable (e.g., Multi-PROG OBD Cable) to the vehicle's OBD port.
- Connect to Main Unit: Connect the other end of the diagnostic cable to the main MultiProg unit's ISP/ECU/DOIP interface.
- Power the Device: Supply power to the MultiProg unit. This can be via a cigarette lighter adapter or the built-in battery (if applicable). Ensure a stable power supply, especially during programming.
- Ignition ON: Turn the vehicle's ignition switch to the ON position (without starting the engine).
- Turn on Device Power: Switch on the MultiProg device using the host switch.
Image: Top and rear view of the MultiProg programmer with labeled ports (Power socket, PE grounding plug, ISP/ECU/DOIP interface, Automation programming interface, RJ45 network port, USB B interface, USB A interface, IC Locking Holder, Magnetic shield, Touch screen, Main unit switch, Status Indicator).
4. Operating Procedure
Once the device is connected and powered on, follow these general steps for operation:
- Select Vehicle: Navigate through the menu to select the vehicle's Brand → Model → Year → Engine Code. For greater accuracy, use the VIN code for automatic identification.
- Automatic Scan: Click "Full System Scan" on the device. Wait for the scan to complete, then view the diagnostic report.
- Diagnosis and Repair:
- Read fault codes.
- View data streams.
- Perform tests as needed.
- Execute repairs.
- Clear fault codes after repair.
Image: Front view of the MultiProg programmer highlighting key functions (Memory Read/Write, MCU Read/Write, ECU Read/Write, TCU Read/Write, Car Immo Module Read/Write, Third-party Script, Batch Programming Function) and the main menu on the touch screen.
Scan Report Interpretation Guide
| System Status | Icon Color | Meaning | Recommended Action |
|---|---|---|---|
| Normal | Green | No fault codes | No action required |
| Current Fault | Red | Current fault present | Diagnose immediately |
| Historical Fault | Yellow | Past fault occurred | Inspect related components |
| Communication Failure | Black | Unable to connect to system | Check wiring/power supply |
5. Diagnostic Workflow
A typical diagnostic workflow using the MultiProg includes:
- Initial Information Gathering: Collect all relevant vehicle and symptom information.
- Fault Code Analysis: Read and analyze diagnostic trouble codes (DTCs).
- Data Stream Analysis (Critical Step): Examine live data streams from various sensors and actuators to identify anomalies.
- Active Test Verification: Perform active tests to verify the functionality of components.
- Repair Verification: After repairs, re-scan and clear fault codes to ensure the issue is resolved.
Final Reminder:
This tool is a professional repair aid and should only be used by individuals with a foundational understanding of automotive electronics. Continuous learning and hands-on practice are essential for mastering diagnostic techniques.
6. Specifications
| Feature | Detail |
|---|---|
| Operating System | Linux |
| Processor | ZYNQ7020 Dual-core Cortex A9 +FPGA |
| Memory | 256M*2 DDR + 64M NOR FLASH |
| Display | 3.5-inch Touch Screen |
| Input Voltage | 15V/4A |
| Working Current | 300mA (14V) |
| Working Temperatures | -20°C to 50°C |
| Storage Temperatures | -30°C to 65°C |
| External Interface | USB/RJ45 |
| Dimensions | 233mm * 150mm * 54mm |
| Communication Interface | OBD-II |
| Wireless Support | Wifi |
| Origin | Mainland China |
Image: Angled view of the MultiProg programmer, showing the screen and side ports.
7. Package Contents
The Xhorse MultiProg Programmer package typically includes the following items:
- 1x MultiProg Main Unit + VH13 adapter
- 1x Power Adapter
- 1x Power Cable
- 1x USB Cable
- 1x MCU Cable
- 1x MCU DB15 Cable
- 1x ECU Cable
- 1x ECU DB15 Cable
- 1x OBD Cable
- 1x VH24 Interface Adapter Board
- 1x VH20 Interface Adapter Board
- 5x ECU Harness Plug Replacement Parts
Image: Detailed view of all included cables and adapters for the MultiProg programmer.
8. User Tips
- Software Updates: Regularly check for and install the latest software and firmware updates to ensure compatibility with new vehicle models and to access the latest features and bug fixes. The device supports online database updates.
- Stable Power: Always ensure a stable and sufficient power supply to the MultiProg unit and the vehicle during critical operations like ECU/TCU programming to prevent data corruption.
- Data Backup: Before performing any write or clone operations, always back up the original data. This is crucial for recovery in case of unexpected issues.
- Correct Adapters: Use the correct cables and adapters for each specific task to ensure proper connection and communication. Refer to the included diagrams and instructions for adapter usage.
9. Troubleshooting
If you encounter issues with your Xhorse MultiProg Programmer, consider the following general troubleshooting steps:
- No Power: Check all power connections, ensure the power adapter is correctly plugged in, and verify the vehicle's battery voltage is sufficient.
- Communication Errors: Ensure all cables are securely connected to both the MultiProg unit and the vehicle/component. Verify the vehicle's ignition is in the ON position. Check for any damaged cables or connectors.
- Software Freezes/Crashes: Restart the MultiProg unit and the associated software on your PC. Ensure your software and firmware are up to date.
- Inaccurate Readings/Failed Operations: Double-check that the correct vehicle model and ECU/TCU type have been selected in the software. Ensure all connections are clean and free from debris.
- Device Not Recognized by PC: Verify USB cable connection. Try a different USB port or cable. Ensure necessary drivers are installed on your PC.
For persistent issues, refer to the official Xhorse support resources or contact their technical support.
10. Warranty & Support
For detailed warranty information, please refer to the official Xhorse product warranty policy provided at the time of purchase or on the manufacturer's website. Keep your purchase receipt as proof of purchase.
Technical support is available through the official Xhorse channels. You can typically find support contact information on their website or within the device's software application.
An additional user manual in PDF format is available for download: View User Manual (PDF).
CE Mark indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area.
