1. Product Overview
The JONSBO D33 is a versatile MATX desktop computer case designed for high-performance gaming and productivity. It features a rounded body and a distinctive grille technology front panel, available in both standard and wood grain versions. The chassis supports advanced cooling solutions, including 360mm water cooling, and offers extensive compatibility for various components. Its design emphasizes both aesthetics and efficient thermal management.

2. Warnings & Safety Information
- Do not use the computer case in humid environments to prevent damage to components.
- Do not disassemble internal components without proper authorization. Unauthorized disassembly may void your warranty and cause damage.
- Ensure adequate ventilation around the case to prevent overheating of internal components.
- Prevent liquids from entering the interior of the case.
- Do not forcibly compress or deform the case, as this can damage the structure and internal components.
3. Setup Instructions
3.1 Initial Placement
- Place the JONSBO D33 case on a stable, level surface to ensure proper balance and prevent accidental tipping.
- Ensure sufficient space around the case for optimal airflow and ventilation.
3.2 Component Installation
The D33 case is designed for easy installation of various components. Refer to the following guidelines and diagrams for proper assembly:
- Motherboard: The case supports Mini ITX and Micro ATX motherboards, including back-plug compatible designs.
- Graphics Card: The case supports graphics cards up to 435mm in length (without a front-mounted fan). A standard graphics card bracket is included to prevent sagging.
- Power Supply: Compatible with ATX PS2/SFX power supplies up to 160mm in length. A standard SFX power supply bracket is included.
- Storage: Features 2 x 3.5" HDD bays and 2 x 2.5" SSD bays (shared).
- Cooling Systems:
- Air Cooling: Supports CPU coolers up to 172mm in height.
- Water Cooling: The top panel supports 240mm or 360mm radiators. The top fan/water cooling bracket is detachable for easier installation.



3.3 Front Panel Connections
The front I/O panel provides convenient access to essential ports:
- 1 x USB 3.2 Gen2 Type-C (10Gbps)
- 2 x USB 3.0 (5Gbps)
- 1 x Audio + 1 x Microphone (2-in-1 jack)
- Power On Button
- Reset Button

3.4 Power On
- After all components are securely installed and connected, connect the power cord to the power supply unit and a wall outlet.
- Press the Power On button on the front panel to start your system.
4. Operating Guidelines
The JONSBO D33 case is designed to house and protect your PC components while providing optimal airflow. Once your system is built and powered on, ensure that the case's ventilation paths are not obstructed to maintain efficient cooling.

5. Maintenance
- Cleaning: Regularly clean dust from the case, especially from fan filters and ventilation areas, to maintain optimal airflow and prevent overheating. The bottom air intake is equipped with a magnetic dust-proof screen for easy cleaning.
- Handling: Handle the case with care. Avoid dropping it or subjecting it to strong impacts.
- Environment: Store and operate the case in a dry, well-ventilated area, away from direct sunlight and extreme temperatures.

6. Troubleshooting (FAQs)
- Q: The unit fails to power on.
- A: Check all power connections, including the power supply unit, motherboard, and front panel power switch cables.
- Q: Poor heat dissipation or high temperatures.
- A: Ensure adequate ventilation around the case. Clean any accumulated dust from fans and filters. Consider adding additional fans or upgrading your cooling solution if temperatures remain high.
- Q: Excessive noise from the case.
- A: Verify that all screws, especially those securing fans and drive bays, are securely tightened. Check for any loose components or cables that might be vibrating against the case. Ensure fans are properly mounted and not obstructed.
7. Specifications
| Feature | Specification |
|---|---|
| Product Model | D33 (Standard & Wood versions) |
| Chassis Type | Desktops (Horizontal) |
| Case Size (D*W*H) | 455mm * 238.2mm * 368.4mm (including foot pads) |
| Net Weight | 6.7kg |
| Motherboard Support | Mini-ITX, Micro-ATX (compatible with back-plug motherboards) |
| Drive Bays | 2 x 3.5" HDD, 2 x 2.5" SSD (shared) |
| Expansion Slots | 4 |
| Max GPU Length | 435mm (without front fan) |
| Max CPU Cooler Height | 172mm |
| Power Supply Support | ATX PS2/SFX (max length 160mm) |
| Front Fan Options | 2 x 120mm (with ATX PSU) / 2 x 140mm (with SFX PSU) (optional) |
| Top Fan Options | 3 x 120mm (optional) |
| Rear Fan Options | 1 x 120mm (optional) |
| Bottom Fan Options | 3 x 120mm (optional) |
| Radiator Support (Top) | 240mm / 360mm |
| Front Ports | 1 x USB 3.2 Gen2 Type-C, 2 x USB 3.0, 1 x Audio+Mic (2-in-1) |
| Side Panel | Tempered Glass Window |
| Dust Filters | Bottom (Magnetic) |
| RGB Support | No RGB (case itself) |
| Material | Other (likely steel, aluminum, wood/plastic) |
8. User Tips
Based on general user feedback for PC cases:
- Cable Management: Take time to route cables neatly behind the motherboard tray. This improves airflow and makes future upgrades or maintenance easier. The D33 offers 51mm of backline routing space.
- Fan Configuration: Experiment with different fan configurations (intake/exhaust) to find the best balance between cooling performance and noise levels for your specific components.
- Component Planning: Due to its compact MATX form factor, carefully plan your component choices, especially for large GPUs and CPU coolers, to ensure compatibility and sufficient clearance.
9. Warranty & Support
9.1 Warranty Information
The JONSBO D33 MATX Desktop Computer Case comes with a 1-year warranty period from the date of purchase. Please retain your proof of purchase for warranty claims.
9.2 Additional Resources
For more detailed information, diagrams, or specific installation steps, you may refer to the official user manual PDF: