Flytec V080

Contents

Flytec V080 Remote Control Bait Boat User Manual

Model: V080

1. Introduction

The Flytec V080 Remote Control Bait Boat is an advanced fishing tool designed for efficient bait delivery and fish finding. It features a long control distance, large bait load capacity, and intelligent navigation functions to enhance your fishing experience.

Product overview and key features demonstration.

2. Safety Warnings

To avoid the risk of fire, electric shock, or property/personal injury, please follow these safety guidelines:

  1. Read the complete manual and safety warnings before use.
  2. This product contains sensitive electronic components and parts; use it carefully.
  3. Do not place this product in direct sunlight or a dark & humid environment.
  4. Do not use this product in rainy/lightning weather.
  5. Do not go backwards after releasing the fishing net or fishing line to prevent entanglement with the motor/propeller.
  6. Do not let the boat cross water plants or other obstacles to avoid motor entanglement.
  7. Always maintain the dryness and cleanliness of this product.
  8. Do not clean it when this product is powered on. If it is still humid, do not connect the power.
  9. When in use, it is recommended to tie the hanging rope on the remote control to hang it on your neck.
  10. Do not completely exhaust the battery.
  11. When using this product, fully charge the battery before use.
  12. Use only the provided adapter to charge the battery.
  13. Do not power the product with the battery for a long time.
  14. If only two (or less than two) of the three LEDs of the boat's power indicator are displayed, charge it immediately.
  15. When not using this product, remove the battery from the boat.
  16. Do not leave any cables that may be tripped or pulled unexpectedly.
  17. Do not use this product in high-temperature environments.
  18. Do not drop or damage the product.
  19. Before charging, check if the charger is damaged.
  20. Use official parts for replacement.
  21. If the product fails or stops working, stop using it and contact the supplier.
  22. Keep packaging materials and small accessories out of reach of children.

3. Product Structure Details

Familiarize yourself with the components of your V080 Bait Boat.

Flytec V080 Bait Boat on water

The V080 Bait Boat in action.

Boat Components:

  • Steering Light: Indicates turning direction.
  • Hopper: Compartment for bait.
  • Antenna: For remote control signal.
  • Switch: Power on/off.
  • Battery Compartment Cover: Protects the battery.
  • Front Searching Light: For night navigation.
  • Handle: For carrying the boat.
  • Power Indicator LCD: Displays battery status.
  • Hook Control Valve: For releasing fishing hooks.
  • Fishfinder Bracket Drag Rope (Optional): For attaching the fish finder.
  • Fishfinder Bracket (Optional): Mount for the fish finder.
  • Motor & Motor Protective Cover: Protects the dual 550 motors.
Remote Controller Diagram

Detailed view of the remote controller with labeled buttons and screen.

Remote Controller Components:

  • Speed Adjustment Wheel: Adjusts boat speed.
  • Left/Right Joysticks: Control boat movement.
  • Calibration/Frequency Button: For initial setup and calibration.
  • Fishing Ground Button: Accesses fishing ground settings.
  • Origin Point Button: Sets the boat's home/origin point.
  • Clear Button: Clears anchor points.
  • Cancel Button: Cancels current operation.
  • Light Button: Controls boat lights.
  • Fixed-Speed Cruise Button: Activates/deactivates cruise control.
  • Charging Indicator: Shows charging status.
  • Power Indicator: Displays controller battery level.
  • Up/Down/Left/Right Buttons: Navigation for menu and settings.
  • OK Button: Confirms selections.
  • Boat Signal Icon: Indicates signal strength.
  • Boat Battery Icon: Displays boat battery level.
  • Front Light Icon: Indicates front light status.
  • Compass: Shows boat's heading.
  • GPS Signal: Indicates GPS signal strength.
  • Distance Display: Shows distance from origin or anchor point.
  • Boat Driving Direction: Real-time display of boat's direction.
  • GPS Positioning Point: Displays specific positioning points.
  • Left/Right Hook Control Valve: Controls bait release.
  • Return Icon: Indicates automatic return to origin.
  • Left/Right Hopper: Controls bait hopper release.

4. Setup

4.1. Unpacking and Initial Preparation

  1. Carefully remove the bait boat from its packaging.
  2. Tear off any protective film from the bottom of the boat.
  3. Install the antenna onto the bait boat.
  4. If you have the Fish Finder version, install the probe into the fishfinder bracket from top to bottom. Connect it to the rear of the boat with the fishfinder bracket drag rope.

4.2. Battery Installation and Charging

  1. Open the battery compartment cover on the boat.
  2. Connect the boat battery to the power cord inside the compartment.
  3. Close the battery compartment cover, ensuring it is fully sealed for waterproofing.
  4. Use the provided adapter to fully charge both the boat battery and the remote control before first use.
Battery installation in bait boat

Connecting the 12V 20000mAh lithium battery.

4.3. Motor Booster Installation

Attach the quick-fitting boosters to the motor outlets at the rear of the boat. Insert the groove of the motor protective cover into the corresponding buckle and then rotate to fix it. This effectively prevents winding.

4.4. Controller Pairing (Frequency Matching)

  1. Place the boat on a horizontal surface.
  2. Hold down the 'Calibration' button on the remote control and turn on the boat's power switch. The boat's tail lights will flicker.
  3. Turn on the remote control switch.
  4. Wait until the remote control indicator light stays on and the boat signal icon appears on the screen. This indicates successful frequency matching.
  5. After successful pairing, push the remote control joystick to check if the boat responds.

Note: When the boat is not in water, its gyroscope is not active, which may cause temporary functional abnormalities (e.g., only one motor working). This is normal.

5. Operating Instructions

5.1. Calibration

Once the remote control shows a GPS signal icon with a strength greater than 9, calibration can be performed. Place the boat in the water and drive it about 7 meters away from the shore, ensuring no obstacles. Press the 'Calibration' button. The boat will perform an automatic calibration sequence (turning left in a circle, then right in a circle) and stop upon completion.

5.2. Fishing Ground and Anchor Point Settings

The V080 supports 9 fishing grounds (1-9), each capable of storing 20 anchor points, for a total of 180 anchor points.

GPS Fixed-Point Cruise

Beidou GPS dual positioning for precise nest making.

  1. Setting Origin Point: Each fishing ground must first have an origin point set (recommended on shore). Select '01' using the remote control selection button and press 'OK'. The '01' on the display will flash then stay solid, indicating success.
  2. Setting Anchor Points: Drive the boat to the desired location. Select the corresponding number (e.g., '02', '03') using the remote control selection button and press 'OK'. The number will flash then stay solid. Repeat for up to 20 anchor points per fishing ground. You can switch between fishing grounds to set more points.

Note: Anchor points between different fishing grounds do not affect each other. Remember to switch to the correct fishing ground if you change your fishing location, otherwise the boat will execute the auto-return function to the previous origin.

5.3. Cruise Control

  1. Select any successfully set anchor point using the remote control selection button.
  2. Press 'OK' to start automatic cruising. The boat will drive to the designated point. The remote control screen will display the distance to the anchor point.
  3. When the boat reaches within 1 meter of the target point, the cruise ends. The distance display will then show the distance to the origin.
  4. To cancel cruise control, press the 'Cancel' button. The boat will stop.

5.4. Fixed Speed Cruise

  1. Simultaneously push both joysticks up.
  2. Press and hold the 'Fixed-Speed Cruise' button until the boat enters fixed-speed cruise mode.
  3. In this mode, you can still control the boat's sailing direction.

Note: To exit fixed-speed cruise mode, press the 'Fixed-Speed Cruise' button again.

5.5. Bait Release

The V080 features a separable bait tank, capable of loading two different types of bait at once, with a maximum bait load of 3kg (6 pounds).

Bait Tank Display

Separable bait tank for two types of bait, max 3kg load.

  1. If the hopper partition is installed, you can control the left and right hoppers separately. Press the left hopper button to release bait from the left hopper; the left hopper icon on the remote control screen will flash.
  2. Press the right hopper button to release bait from the right hopper; the right hopper icon on the remote control screen will flash.
  3. If the hopper partition is NOT installed, press both the left and right hopper buttons simultaneously to release all bait.

Note: After baiting, the bottom hopper baffle needs to be manually closed.

5.6. Hook Hanging & Fishing Net Release

The boat has hook control valves at the tail. Press the corresponding hook control valve button to quickly attach fishing hooks or a fishing net. Once the device is restored, it can be successfully hung. Then the boat can be driven for fishing net release operation. After reaching the desired location, press the left hook control valve button to release the fishing net.

Fishing Net Solenoid Valve

Portable internet connection with one-click disconnection for fishing net solenoid valve.

5.7. Speed Switching

The boat has 2 speed gears. Use the speed adjustment wheel on the remote control to switch speeds. One 'DI' sound indicates low speed, two 'DI' sounds indicate high speed.

5.8. Electronic Fence Protection

The boat has an effective control distance of 800m. To prevent signal interference or delay at long distances, an electronic fence function is set at 500 meters. If the boat exceeds 500m, it will automatically return to within 500m and stop.

Note: If the boat is within 500m and you want it to return to the origin, press the 'Origin' button. The boat will return in a straight line. The fence return action cannot be canceled. If you switch to another fishing ground with an origin point set more than 500m away from the current boat location, the fence function will automatically trigger, returning the boat to the origin of that fishing ground. You will need to switch back to the original fishing ground and cancel it.

5.9. Automatic Return

If the boat's battery is low or the remote control signal is lost (signal icon disappears), the boat will automatically return to its origin point.

Automatic Return Feature

Automatic return function for low battery or lost signal.

5.10. Lights

The boat is equipped with bright LED lighting for night navigation. Press the 'Light' button to cycle through modes: Flash - Always On - Light Off. The tail of the boat also has steering lights; the left tail light illuminates when turning left, and the right tail light illuminates when turning right.

Bright LED Lighting

Rear illuminated double-sided large particle blue high brightness taillights ensure clear night navigation.

5.11. Distance Display

The remote control displays the distance. If no origin point is set, it shows '0'. After setting an origin point, it displays the distance between the boat and the origin. During cruise control, it shows the distance to the anchor point. After the cruise, it reverts to showing the distance to the origin.

6. Maintenance

6.1. Bait Boat Care

  1. After each use, dry the boat to keep it clean and dry.
  2. After use, there may be a small amount of water retained in the drain port of the water cooling device on the bottom of the boat. Wipe it dry before storage.
  3. When not in use, store the bait boat to prevent dust contamination.

6.2. Battery Care

  1. If the battery will not be used for a long time, remove it from the boat and charge it for storage.
  2. Do not store with corrosive liquids.
  3. Do not approach hot objects.
  4. Do not completely discharge the battery.
  5. Do not power the product with the battery for a long time.

6.3. Motor Care

After each use, check the motors for any tangled debris and remove them.

6.4. Remote Control Charging and Dormant Mode

Charge the remote control using the configured USB charging cable. The charging indicator light is red during charging and turns off when complete. If the remote control is not operated for 10 minutes and is not paired with the boat, it will automatically enter dormant/standby mode. Turn it off and on again to restore the previous operating interface; fishing ground and anchor point settings will be retained.

7. Troubleshooting

7.1. Remote Control Cannot Control the Boat

If the remote control cannot control the boat, power off both the remote control and the bait boat. Then, re-perform the frequency matching steps (Section 4.4).

7.2. Low Power Prompt

When the boat battery is low (only one bar left on the boat's power indicator light and remote control), return the boat and charge the battery immediately. If the remote control battery is low (only one light left on the controller), charge the controller immediately.

7.3. Lost Signal Automatic Return

If the boat signal icon disappears from the remote control screen, or if the boat is in a poor signal area for a while, the boat will automatically return to its origin.

7.4. Functional Abnormalities (Not in Water)

If the boat exhibits functional abnormalities (e.g., only one motor working) when not in water, this is normal as the gyroscope is not activated. Place the boat in water for proper operation.

8. Specifications

Boat Information Table

Detailed specifications for the V080 Bait Boat.

FeatureSpecification
Item No.V080
Boat MaterialABS
Bait Load3kg
Boat ColorCarbon Fibre/Orange
Boat Size54.8 x 27.5 x 27.7 cm
Boat Weight3606g
Motor550 Brushed 12V motor
Boat Battery12V 20000mAh
Control Distance800m
Controller BatteryBuilt-in Lithium Battery
Charging Time12H
Playing Time2-4H
MaterialABS
TypeBait Thrower

Fish Finder Version (Optional)

  • Fishfinder Control Distance: 100m / 328ft
  • Depth: 2-120ft
  • Sonar Beam Angle: 90 degrees
Fish Finder Function

Fish finder exploration at a depth of 40 meters underwater.

9. User Tips

  • Battery performance can vary based on usage and environmental conditions, such as strong winds.
  • Ensure the boat is fully charged before long sessions to maximize runtime.
  • Always double-check the remote control's battery level before heading out.

10. Warranty and Support

For warranty claims, technical support, or any issues not covered in this manual, please contact your seller or the manufacturer directly. Keep your purchase receipt as proof of purchase.

© 2023 Flytec. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.