Introduction
The TELESIN Magnetic Pro Shot Imaging Camera Grip is a versatile accessory designed to enhance your mobile photography experience. This manual provides detailed instructions on how to set up, operate, and maintain your device, ensuring you get the most out of its advanced features.
Product Overview
The TELESIN Magnetic Pro Shot Imaging Camera Grip combines a retro classic design with modern functionality, delivering a professional shooting experience in the palm of your hand. It features a strong magnetic attachment, wireless charging, a two-stage mechanical shutter, and advanced control options.

Figure 1: TELESIN Magnetic Pro Shot Imaging Camera Grip attached to an iPhone (for iPhone 12 or later iOS 26 only)

Figure 2: TELESIN Master Grip (White)
Package Contents
Please check the package to ensure all items are present:
- TELESIN Pro Shot Imaging Grip ×1
- Lanyard ×1
- Charging cable ×1
- Magnetic ring ×1
- Manual ×1
- Cleaning kit ×1

Figure 3: Package Content
Setup Guide
Compatibility
The TELESIN Magnetic Pro Shot Imaging Camera Grip is compatible with iPhone 12 and later models. An upgrade to iOS 26 is required for full functionality.

Figure 4: Compatibility with iPhone 12 and later, iOS 26 required.
Magnetic Attachment
Align the grip with the back of your MagSafe-compatible iPhone. The strong magnets will securely attach the grip to your phone.
Bluetooth Pairing (Grip)
- Long press the camera button on the grip for two seconds to turn it on. The device will enter Bluetooth pairing status.
- On your iPhone, open the Settings app and navigate to Bluetooth.
- Connect to the device named "TELESIN_IPX".
- Return to the Settings page, then tap on Accessibility.
- Tap on Zoom and enable the zoom function.
- Pinch the screen with three fingers to restore the display ratio.
- Ensure "Zoom" is enabled in your phone settings after Bluetooth pairing.
Video 1: Master Image Grip (Power Bank) - White Model Connection/Basic Function Introduction. This video demonstrates how to power on the grip, connect it via Bluetooth, and enable necessary accessibility settings on your iPhone.
Bluetooth Pairing (Flashlight - if applicable)
- Long press the flashlight's power button to turn it on. The default state is a constant light.
- Tap the flashlight's button to switch between different flashlight modes.
- On your iPhone, enter the Bluetooth interface.
- Connect to the device named "TELESIN_LT03".
- After successful pairing, open the dedicated app and click to connect the device.
Grip and Flashlight Linkage Setup
To link the grip and the magnetic flash:
- Connect both the grip and the flash to your phone via Bluetooth.
- Press and hold the Fn button on the grip until the green light flashes rapidly, then release.
- Press and hold the lightning button on the flash until the blue light flashes rapidly, then release.
- The link is established when both lights stay solid.

Figure 5: Grip Linkage Setup for Magnetic Flash.
Operating Instructions
Controls Overview

Figure 6: Labeled diagram of the grip's controls and ports.
- Fn Custom Key: In the app, press to switch dial mode. In video mode, press to capture, double-click to start/stop recording.
- Shooting Button: Press and hold for 2 seconds to power on/off. Half-press to focus, full-press to shoot.
- Zoom Rocker: Move right to zoom in, left to zoom out.
- Mode Dial: Default function is to switch camera modes. Can be customized for filter intensity, etc.
- Screen Off Wake Button: Press and hold for 2 seconds to wake the camera. Press to switch between front and rear cameras.
- Wrist Strap Hole: For attaching a wrist strap.
- 1/4" Threaded Hole: For mounting on tripods or other accessories.
- Charge Power Button: Click to start wireless charging, double-click to stop.
- Type-C Charging Port: For charging the grip itself.
- Magnetic Charging Port: For wireless charging of your iPhone.
- Thumb Rest: Ergonomically designed to prevent accidental screen touches.
Camera Operation
- Long press the screen wake key to enter the camera directly. You can also turn off the screen when it's on.
- The wave zoom lever allows for camera zooming.
- The oscillating wave wheel enables camera mode switching.
- Half-press the shutter button to focus; press fully to shoot.

Figure 7: Mechanical Shutter & Zoom Dial functionality.
Recording Mode (Fn Key)
- Double-click the Fn key to pause or continue recording.
- Click the Fn key to take a screenshot.
Charging Your iPhone
- Tap the bottom button on the grip to start wireless charging your iPhone.
- Double-tap the bottom key to stop charging.

Figure 8: 3200mAh Battery Wireless Charging.

Figure 9: Wireless Charging Diagram.
Flashlight Operation
- Press the photo key on the grip to turn on the flashlight simultaneously with taking a photo.
- Turn the knob on the flashlight to adjust its power.

Figure 10: Breakthrough Phone Magnetic Flash in use.

Figure 11: Breakthrough Magnetic Flashlight for iPhone.
AI Master Filters & Adjustments
- The grip supports AI Master Filters for real-time ambient sensing and auto-optimization of parameters, allowing for pro-grade styles without expertise.
- Use the tactile dial for precision filter density adjustment. Each 5° rotation refines style intensity by 1%.

Figure 12: AI Master Filters for pro-grade styles.

Figure 13: Tactile Dial for Precision Filter Density Adjustment.
Recommended Flash Settings
- Open grip settings in the "Cailiao Camera" APP.
- Set the dial function to "adjust shutter speed".
- Select "FNC" (no filter) mode in the shooting interface.
- Adjust shutter speed to around 1/100 via the dial, then shoot.

Figure 14: Recommended Flash Settings in the Cailiao Camera App.
Custom Keycaps
Customize your grip with different colored keycaps to match your mood and style.

Figure 15: Custom Keycaps to Customize Your Mood.
Maintenance
- Use the provided cleaning kit for regular cleaning of the grip and magnetic flash.
- Keep the device dry and away from extreme temperatures.
- Avoid dropping or subjecting the device to strong impacts.
- Store the grip in a safe place when not in use to prevent scratches or damage.
Troubleshooting
- Connectivity Issues: Ensure Bluetooth is enabled on your iPhone and the grip/flashlight are powered on and in pairing mode. If issues persist, try unpairing and re-pairing the devices.
- Camera Mode/Exposure: When the focus state fluctuates the wheel, you can only adjust the exposure, not switch modes.
- Charging: If wireless charging does not start, ensure the grip is properly aligned with your iPhone's charging coil and the charge power button is pressed. Double-tap to stop charging if it's not needed.
- App Functionality: Ensure the "Cailiao Camera" app is updated to the latest version for full functionality and compatibility.
Specifications
| Material | ABS/PC/aluminum alloy |
| Dimensions | 4.8 × 1.7 × 3.5 inches |
| Weight | 180g |
| Battery | 3200mAh |
| Charging | 5V/2A Type-C |
| Bluetooth Compatible | iPhone 12 and later |
| System Version | iOS 26 required |

Figure 16: Product Specifications.
User Tips
- Controlling Charging: The grip features a dedicated charge power button. Single-click to start wireless charging and double-click to stop it, giving you full control over when your phone charges.
- Thumb Rest: Utilize the ergonomic thumb rest to prevent accidental screen touches and ensure a stable grip during shooting.
- Customization: Explore the custom keycaps and AI Master Filters within the app to personalize your shooting experience and achieve desired aesthetic effects.
- Ergonomic Design: The grip's design is inspired by classic cameras, with professional contours adapting to all hand sizes for comfortable use.

Figure 17: Thumb Rest Anti-Touch Protection.

Figure 18: Professional Grip Design.
Warranty and Support
For warranty information or technical support, please refer to the official TELESIN website or contact their customer service directly. Keep your purchase receipt for warranty claims.