1. Introduction
Welcome to the 4DRC L2 RC Helicopter. This manual provides essential information for the safe operation, setup, and maintenance of your new RC helicopter. Please read it thoroughly before first use to ensure optimal performance and safety. The 4DRC L2 is a 1:33 scale replica of the Black Hawk helicopter, featuring an 8K HD camera, 6-axis gyroscope, optical flow positioning, and a remote control with a built-in screen for an immersive flight experience.
2. Safety Guidelines
⚠️ Not suitable for children under 36 months.
- Always operate the helicopter in open, unobstructed areas, away from people, animals, and obstacles.
- Do not fly near airports, power lines, or other restricted airspace.
- Check local regulations regarding drone operation before flying.
- Ensure the battery is fully charged before each flight.
- Do not touch the rotating propellers during operation.
- Keep hands, face, and loose clothing away from moving parts.
- Avoid flying in strong winds or adverse weather conditions.
- Supervise children during operation.
- Turn off the helicopter and remote control when not in use.
3. Package Contents
Please check the package contents to ensure all items are present:
- L2 RC Helicopter
- Remote Controller with Built-in Screen
- Batteries (for helicopter)
- USB Charging Cable
- Spare Propellers
- Screwdriver
- Display Stand
- Operating Instructions (this manual)
- Color Box

4. Specifications
| Feature | Detail |
|---|---|
| Product Name | L2 Helicopter |
| Model Number | 4D-L2 |
| Brand Name | 4DRC |
| Type | HELICOPTER |
| Body Dimensions | 33 x 8 x 9 cm |
| Color | Gray-Blue |
| Material | Plastic (ABS / Electronic Components) |
| Motor Type | Brushless Motor |
| Control Channels | 4 channels |
| Gyroscope | 6-axis Gyroscope (Single-Rotor Flybarless Design) |
| Remote Control | Yes, with Built-in Screen (MODE2) |
| Remote Distance | 100M |
| Video Transmission | 2.4G High-Speed Video Transmission |
| Camera | 8K HD Main Camera (Aerial Photography, HDR Picture Quality) |
| Power Source | Electric (Lithium battery) |
| Helicopter Battery Capacity | 3.7V 500mAh (Modular, Quick-swap) |
| Charging Time | Approx. 1-2 hours (90 minutes via USB) |
| Flight Time | Approx. 12 minutes (10~20 minutes) |
| Controller Battery | 3*AA Battery (not included) |
| Features | App-Controlled, Optical Flow Positioning & Hover, One-Key Take Off/Landing, 3-Speed Adjustment, Gesture Recognition Photo/Video, Trajectory Flight |
| Operator Skill Level | Beginner, Intermediate, Expert |
| Indoor/Outdoor Use | Indoor-Outdoor |
| Recommended Age | 14+y |

5. Setup
5.1 Charging the Helicopter Battery
- Remove the modular battery from the helicopter.
- Connect the battery to the USB charging cable.
- Plug the USB charging cable into a suitable USB power source (e.g., computer USB port, USB wall adapter).
- The indicator light on the charging cable will show the charging status. Refer to the charging cable's specific instructions for light indications (usually red for charging, off or green for fully charged).
- Charging takes approximately 1-2 hours. Do not overcharge.
5.2 Installing Remote Controller Batteries
- Open the battery compartment on the back of the remote controller.
- Insert 3 AA batteries (not included), ensuring correct polarity (+/-).
- Close the battery compartment securely.
5.3 Propeller Installation (if needed)
If propellers are not pre-installed or need replacement:
- Identify the correct propeller for each motor (usually marked A and B, or with specific shapes).
- Carefully attach each propeller to its corresponding motor shaft.
- Use the provided screwdriver to secure the propellers if screws are required. Ensure they are firmly attached but not overtightened.
5.4 Binding the Helicopter and Remote Control
- Place the helicopter on a flat, level surface.
- Turn on the helicopter's power switch. The indicator lights will flash.
- Turn on the remote controller.
- Push the left joystick (throttle) all the way up, then all the way down.
- The helicopter's indicator lights will stop flashing and remain solid, indicating successful binding.
6. Operating Instructions

6.1 Basic Controls (Refer to Figure 6.1)
- Left Stick (Throttle/Yaw):
- Push up/down: Increase/decrease altitude.
- Push left/right: Rotate helicopter left/right (Yaw).
- Right Stick (Pitch/Roll):
- Push up/down: Move helicopter forward/backward (Pitch).
- Push left/right: Move helicopter left/right (Roll).
6.2 One-Key Take Off / Landing
After binding, press the 'One-Key Take Off / Land' button on the right side of the remote controller (refer to Figure 6.1). The helicopter will automatically take off and hover at a stable altitude. Press the same button again to initiate an automatic landing.

6.3 Optical Flow Positioning & Hover
The L2 helicopter features an optical flow positioning system that visually recognizes ground texture for real-time position, preventing drift. This allows for stable hovering, especially indoors or at low altitudes. Activate/deactivate Optical Flow using the dedicated button on the left side of the remote controller (refer to Figure 6.1).

6.4 Speed Adjustment
The helicopter offers 3-speed modes: Low, Medium, and High. Press the 'Speed' button on the left side of the remote controller (refer to Figure 6.1) to cycle through the speeds. Low speed is recommended for beginners, Medium for daily flight, and High for advanced maneuvers and stunts.

6.5 8K HD Camera Operation
The integrated 8K HD camera allows for high-quality aerial photography and video recording. The remote control's built-in screen provides real-time viewing of the flight feed.
- Taking Photos: Short press the 'Photo' button (refer to Figure 6.1).
- Recording Video: Short press the 'Record Video' button (refer to Figure 6.1) to start/stop recording.
- Viewing Media: Long press the 'Photo' button to view photos, or long press the 'Record Video' button to view videos.
- Gesture Recognition Photo/Video: The helicopter supports gesture-recognition. Trigger photos with a wave gesture and videos with a fist gesture, without needing the remote or phone.

6.6 APP Control Mode & Trajectory Flight
Download the official 4DRC app to unlock additional control features, including Trajectory Flight. In APP control mode, you can draw a flight path on your smartphone screen, and the helicopter will follow it automatically.
6.7 3D Flip
The 6-axis gyroscope and flybarless design enable stable and agile flight, including one-click 3D flips. Consult the remote control diagram (Figure 6.1) for the specific button or combination to activate this feature.
6.8 Product Demonstration Video
7. Maintenance
7.1 Cleaning
- Wipe the helicopter and remote control with a clean, dry cloth after each use.
- Do not use water or chemical cleaners, as this may damage electronic components.
- Ensure no dust or debris accumulates in the motor or camera areas.
7.2 Battery Care
- Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
- Do not leave batteries fully discharged for extended periods. Charge them periodically if not in use.
- If the battery is damaged or swollen, discontinue use immediately and dispose of it properly.
7.3 Propeller Replacement
If propellers become damaged or bent, replace them with the provided spare propellers. Refer to section 5.3 for installation instructions. Damaged propellers can affect flight stability and safety.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Helicopter does not respond to remote. | Not bound, low battery, out of range. | Re-bind (Section 5.4), charge batteries, ensure within 100M range. |
| Helicopter drifts during flight. | Not calibrated, uneven surface at takeoff, strong wind. | Ensure takeoff on a flat surface. Use trim adjustments on the remote (Figure 6.1). Avoid windy conditions. |
| Poor camera image/video quality. | Insufficient lighting, camera lens dirty, unstable flight. | Ensure adequate lighting, clean camera lens, fly in stable conditions. |
| Short flight time. | Battery not fully charged, old battery, aggressive flying. | Fully charge battery, consider replacing old batteries, fly more conservatively. |
| Propellers not spinning. | Obstruction, loose connection, motor issue. | Check for obstructions, ensure propellers are securely attached, contact support if motor is faulty. |
9. User Tips
- For beginners, start with the lowest speed setting and practice in a large, open indoor space until comfortable with the controls.
- Utilize the Optical Flow Positioning feature for more stable hovering and easier control, especially when learning.
- Experiment with gesture controls for hands-free photo and video capture once you're confident with basic flight.
- Always keep an eye on the helicopter's battery level via the remote's built-in screen to avoid unexpected landings.
- Consider purchasing additional modular batteries for extended flight sessions.
10. Warranty and Support
For any issues, questions, or support needs not covered in this manual, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims. The manufacturer is committed to providing quality products and customer satisfaction.