1. Introduction
The AIMOS USB C Dual Monitor KVM Switch allows you to control multiple computers (typically one desktop and one laptop) using a single set of keyboard, mouse, and dual monitors. This device is designed to streamline your workspace, enabling seamless switching between systems without the need to constantly re-plug peripherals. It supports high-resolution video output and fast data transfer for enhanced productivity.
This manual provides detailed instructions for setting up, operating, and troubleshooting your KVM switch. Please read it thoroughly before use to ensure proper installation and optimal performance.
2. Safety & Warnings
Important Safety Information:
- Read all instructions carefully before using the device. Failure to follow these instructions may result in product damage or personal injury.
- Keep the device and its cord out of reach of children under 3 years old. Adult supervision is required if children are present.
- Do not use this product for any purpose other than its intended use.
- Inspect the product before each use. Do not use if the device appears damaged in any way.
- Always follow the provided installation and operation guidelines to prevent injury.
- To prevent electric shock, do not attempt to open the device enclosure. There are no user-serviceable parts inside. All servicing should be referred to qualified personnel.
- Ensure all connected computers and peripherals are powered off before connecting or disconnecting any cables to prevent potential damage to your equipment.
- Do not expose the device to extreme temperatures, direct sunlight, or high humidity. Keep the device away from water sources to avoid short circuits.
3. Package Contents
Please check the box for the following items:
- 1 x KVM Switch Dual Monitor (USB-C+HD&DP or USB-C+HD model)
- 1 x Wired Remote (1.5m / 4.92ft)
- 1 x DC 12V Power Supply
- 1 x USB C cable
- 1 x USB A cable (USB 3.0 cable)
- 1 x User Manual
4. Product Overview
The KVM switch features various ports for connecting your computers, monitors, and USB peripherals. Familiarize yourself with the layout before proceeding with installation.
Front Panel
- USB 3.0 OUT Ports: Typically 3x USB-A and 1x USB-C for connecting keyboard, mouse, printer, U-disk, etc.
- Switch Button: For manual switching between connected computers (PC1/PC2).
- Wired Remote Port: For connecting the external wired remote control.
- LED Indicators: Lights to show which computer is currently active.
Rear Panel
- DC/12V Power Input: Connect the included 12V power adapter here.
- ON/OFF Switch: Main power switch for the KVM unit.
- Monitor Outputs:
- DP OUT A / HD OUT A: For connecting your primary monitor. (Specific port type depends on model, e.g., DisplayPort or HDMI)
- HD OUT B: For connecting your secondary monitor. (Specific port type depends on model, e.g., HDMI)
- Computer Inputs:
- PC1 Inputs:
- USB IN (for PC1): Connects to your desktop PC's USB port.
- HD IN A / DP IN A (for PC1): Connects to your desktop PC's primary video output.
- HD IN B (for PC1): Connects to your desktop PC's secondary video output.
- PC2 (Laptop) Inputs:
- TYPE-C IN (for PC2): Connects to your laptop's USB-C port (supports video, data, and power delivery).
- PD IN (for PC2): Connect your laptop's power adapter here to provide power delivery through the KVM switch.
- PC1 Inputs:
5. Setup Instructions
Follow these steps to connect your KVM switch:
- Power Down: Ensure all connected computers (desktop and laptop) and peripherals (monitors, keyboard, mouse) are completely powered off.
- Connect Peripherals to KVM:
- Connect your keyboard and mouse to the USB 3.0 OUT ports on the front panel of the KVM Switch.
- Connect your primary monitor to DP OUT A / HD OUT A and your secondary monitor to HD OUT B on the rear panel of the KVM Switch.
- (Optional) Connect other USB devices (printer, U-disk) to the remaining USB 3.0 OUT ports.
- Connect the Wired Remote to its dedicated port on the front panel.
- Connect Computers to KVM:
- For Desktop PC (PC1):
- Connect a USB-A cable from the KVM's USB IN (for PC1) port to a USB port on your desktop PC.
- Connect video cables (HDMI/DP) from the KVM's HD IN A / DP IN A and HD IN B ports to the corresponding video output ports on your desktop PC.
- For Laptop (PC2):
- Connect a USB-C cable from the KVM's TYPE-C IN (for PC2) port to a full-featured USB-C port on your laptop (ensure it supports video output/DisplayPort Alt Mode).
- Connect your laptop's power adapter to the KVM's PD IN (for PC2) port to enable power delivery to your laptop.
- For Desktop PC (PC1):
- Connect Power: Plug the included 12V power adapter into the KVM's DC/12V Power Input and then into a wall outlet.
- Power On: Turn on the KVM switch using the ON/OFF switch on the rear panel. Then, power on your computers and monitors.
6. Operating Instructions
Switching Between Computers
You can switch between the connected computers using two methods:
- Button Switch: Press the 'SELECT' button on the front panel of the KVM switch to cycle between PC1 and PC2. The LED indicators will show which computer is active.
- Wired Remote: Use the included 1.5m wired remote control to switch between computers with a single press. This is convenient for placing the KVM switch out of sight.
Multiple Display Modes
The KVM switch supports various display modes depending on your operating system:
- Windows Systems: Fully supports both Extended and Mirror (Duplicate) display modes. You can expand your workspace with independent displays or mirror content across monitors. Use the "Win + P" shortcut on your keyboard to quickly select your desired display mode.
- macOS Systems (via USB-C input): The USB-C port on the KVM switch supports Mirror mode only for macOS systems. Multi-Stream Transport (MST) for extended displays is not compatible with macOS when using the USB-C input.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the KVM switch. Do not use liquid cleaners or aerosols.
- Storage: When not in use for extended periods, turn off the device and store it in a dry, cool place, away from direct sunlight and humidity.
- Cable Management: Ensure cables are not kinked or strained to prevent damage to the cables and ports.
8. Troubleshooting
- No Display/Flickering Screen:
- Ensure all video cables (HDMI/DP/USB-C) are securely connected to both the KVM switch and your computers/monitors.
- Verify that your monitors are powered on and set to the correct input source.
- Check if your computer's graphics card and cables support the desired resolution (e.g., 4K@60Hz or 8K@60Hz). Using shorter, high-quality cables can resolve flickering or black screen issues, especially at higher resolutions.
- For laptops connected via USB-C, ensure the USB-C port supports DisplayPort Alternate Mode for video output.
- Keyboard/Mouse Not Responding:
- Ensure the keyboard and mouse are connected to the dedicated USB 3.0 OUT ports on the KVM switch.
- Try reconnecting the USB cables.
- Switch to the other computer and then back to see if it resolves the issue.
- Ensure the KVM switch is receiving adequate power from the 12V power adapter.
- USB Devices Not Working:
- Verify that the USB device is properly connected to a USB 3.0 OUT port.
- Ensure the KVM switch is powered by the external 12V power adapter. The USB port of the computer's main unit provides limited current, which may be insufficient to support high-power USB devices like external hard drives.
- Laptop Not Charging (PD):
- Ensure your laptop's power adapter is connected to the KVM's PD IN port.
- Verify that the USB-C cable connecting the KVM to your laptop supports power delivery.
- Note that while the KVM supports 100W PD input, the actual power delivered to the laptop might be slightly lower (e.g., 80W) due to power consumption by the KVM itself and the cables.
- macOS Extended Display Issues:
- Remember that macOS systems, when connected via the USB-C input, typically only support Mirror mode for dual displays. MST (Multi-Stream Transport) for extended displays is not supported in this configuration.
9. Specifications
| Feature | Specification |
|---|---|
| Brand Name | AIMOS |
| Model Numbers | F202CHD, F202CH, KC202CHD, KC202CH (USB C Dual Monitors KVM Switch) |
| Compatible Systems | Windows, MacOS, Linux, Chrome OS, iOS, iPad OS, Android, Others |
| Compatible Game Consoles | Nintendo Switch, Steam Deck, ROG Ally, ROG X, Legion Go, MSI CLAW |
| Compatible PC Devices | Laptop, Desktop |
| Certification | CE, FCC, RoHS, UL |
| Function | DP, USB-A, USB-C, HDMI-Compatible |
| USB Standard | USB 3.0 (up to 5 Gbps data transfer) |
| Interface Type | USB-A HUB |
| Ports | 2 (for computers) |
| Video Resolution | Up to 8K@60Hz, 4K@144Hz (via HDMI inputs), 4K@60Hz (via USB-C input). Backward compatible with 1080P, 720P. |
| Power Delivery (PD) | Supports PD100W input for laptop charging (up to 80W output to laptop). Requires external 12V power adapter for KVM. |
| Dimensions (approx.) | 23cm (L) x 18cm (W) x 8cm (H) |
| Weight (approx.) | 0.7 kg |
10. User Tips
- Cable Quality: Always use high-quality, certified cables that support the desired resolution (e.g., HDMI 2.1 for 8K, DisplayPort 1.4 for high refresh rates) for optimal video and audio performance.
- USB-C Port Compatibility: For laptop connections, ensure your laptop's USB-C port is a full-featured port that supports DisplayPort Alternate Mode (Alt Mode) for video output, as well as Power Delivery (PD) if you intend to charge your laptop through the KVM.
- External Power: Always connect the included 12V external power adapter to the KVM switch. This ensures stable operation and provides sufficient power for all connected USB devices, especially power-hungry ones like external hard drives.
- Display Settings: After connecting, you may need to adjust your display settings in your operating system (Windows Display Settings, macOS System Settings > Displays) to configure extended or mirrored modes as desired.
- Firmware Updates: Periodically check the manufacturer's website for any available firmware updates for your KVM switch, which can improve compatibility and performance.
11. Compliance Information
This product complies with the following directives and regulations:
- EU Directives:
- Electromagnetic Compatibility (EMC): EN 55032 / EN 55035
- Low Voltage Directive (LVD) / RoHS: EN 62368-1 / Directive 2011/65/EU
- FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
For a detailed PDF user manual, please refer to the official document: User Manual (PDF).
12. Manufacturer Information
Manufacturer
Company Name: SHENZHEN YIJIARN DIGITAL TECHNOLOGY CO., LTD
Full Address: 1B-077, Phase II, South China International Leather Leather Raw Materials Logistics Zone, No. 1 South China Avenue, Hehua Community, Pinghu Street, Longgang District, Shenzhen City, Guangdong Province
Email: Seven6683@163.com
EU Authorized Representative
Company Name: PROCONSEIL FR
Full Address: 8 bis rue Abel 75012 Paris, France
Email: SophieDupont@proconseilfr.com