Introduction
The Timemore X Nuttii Portable Capsule Espresso Machine is designed for coffee enthusiasts who desire high-quality espresso on the go. This compact and wireless device offers dual functionality, allowing you to brew using either coffee capsules or ground coffee. With its efficient heating and pre-infusion capabilities, you can enjoy rich and mellow coffee wherever your adventures take you.
Setup
Before first use, ensure all components are clean. The machine supports two modes: capsule and espresso powder. The necessary components for each mode are included.
Component Overview

Espresso Component Assembly (for Ground Coffee)
Step 1: Prepare Portafilter
Remove the espresso component. Pull out the portafilter handle. Open the coffee grounds extraction cover. Place the powder receiving ring on the portafilter cavity. Pour in the appropriate amount of coffee grounds (recommended coffee weight: 11-13.5g).
Figure 2: Steps for preparing coffee grounds for espresso extraction. Step 2: Distribute Grounds
Scatter coffee grounds evenly with a distribution needle.Step 3: Tamp Grounds
Level the coffee grounds with a tamper. Rotate clockwise to tighten the coffee extraction lid and seal.Step 4: Attach to Machine Body
Align the two alignment lines on the Italian-style component with the two long grooves outside the machine body buttons. Then push up and rotate counter-clockwise to screw into the body.
Capsule Component Assembly
Step 1: Prepare Capsule Chamber
Take out the capsule component. Rotate counter-clockwise to open the capsule chamber cover and flip it. Insert the purchased capsule. Then rotate clockwise to tighten the capsule chamber.
Figure 3: Steps for assembling the capsule component. Step 2: Attach to Machine Body
Align the two alignment lines on the capsule component with the two long slots outside the machine body buttons. Then push upward and rotate counter-clockwise to screw into the machine body.
Operating Instructions
The Timemore X Nuttii machine features a dual-purpose design for both hot and cold brewing, compatible with Nespresso and similar-sized pods, as well as espresso powder.
Brewing Process
Step 1: Place Machine on Stand
After returning the extraction chamber handle to its original position, place the machine body on the stand. Put a portafilter-specific coffee cup under the machine.
Figure 4: Steps for adding water and initiating the brewing process. Step 2: Add Water
Open the water tank lid and add the appropriate amount of warm/hot water without exceeding the water level line. For cold brew, add room temperature water.Step 3: Start Brewing
Press and hold the cold/hot brew button for 2 seconds to start brewing according to your desired mode. Brewing will stop automatically when complete.
Figure 5: The machine in operation, extracting coffee into a cup.
Pre-infusion Function
The machine features a built-in pre-infusion function with a preset standard extraction pressure of 3-5 Bar for pre-infusion and 9.5-12 Bar for extraction. This restores professional espresso machine performance, easily releasing rich crema.

Efficient Heating
The machine can directly reach the ideal extraction temperature of up to 92°C in about 4 minutes when pouring in room temperature water. Simply press one key to start.

Smart Display
The OLED screen provides a clear display even in strong light, showing water temperature, time, and battery level. It offers minimalist interaction for ease of use.

Maintenance
- Cleaning: Only wipe the body with a damp cloth; do not soak or rinse the machine.
- Post-Extraction: After extraction, wait at least 1 minute before removing the extraction chamber to prevent burns.
Troubleshooting
No specific troubleshooting steps are provided in the product information. If you encounter issues, please refer to the 'User Tips' section or contact customer support.
Specifications

| Feature | Detail |
|---|---|
| Brand | TIMEMore |
| Model | Xiaoli x Timemore Mobile Capsule Coffee Machine |
| Color | Black |
| Weight | ~800g |
| Tank Capacity | 40-65mL |
| Battery | 3*3000mAh 3.7V (Total 9000mAh Li-ion) |
| Dimensions | 7.4cm x 7.4cm x 21.7cm |
| Charging | Type-C (Do not use fast charging) |
| Materials | Stainless steel, aluminum alloy, zinc alloy, PC, food-grade PP, Food-Contact Silicone |
| Certification | CE |
| Voltage | 110-220V |
| Capacity (Cup) | 1 cup |
| Extraction Pressure | 9.5-12 Bar (3-5 Bar pre-infusion) |
| Heating Time | Approx. 4 minutes to 92°C |
Warranty and Support
Specific warranty details are not provided in this manual. For warranty claims, technical support, or further assistance, please contact the seller or manufacturer directly. Keep your purchase receipt for proof of purchase.
User Tips
- Pre-infusion for Cold Brew: To activate the pre-infusion function for cold brew, press the cold brew button 5 times continuously.
- Pre-infusion for Capsules: The pre-infusion function is default on in its initial state. It needs to be turned off when using coffee capsules for extraction if you prefer not to use it.
- Temperature Unit Switch: To switch temperature units between Celsius (°C) and Fahrenheit (°F) on the OLED display, press the hot brew button 5 times in a row.
- Portable Use: The machine is designed to be portable and can be easily carried in a backpack, making it ideal for travel, outdoor activities, or office use.
- Versatile Beverages: Explore various coffee possibilities beyond standard espresso, such as Iced Americano, Oat Latte, Specialty Coffee, and Cold Brew.
