Skydroid C14 3-Axis

Contents

Skydroid C14 3-Axis Multi-Function Four-Light Camera Gimbal

Model: C14 3-Axis | Brand: Skydroid

1. Product Introduction

The Skydroid C14 is a compact HD four-light mechanically stabilized gimbal designed for drone applications. It features a new generation imaging chip and integrates distortion-free HD short-focus and long-focus cameras with an effective pixel count of 5 million. It boasts robust 2K video recording and photo-taking capabilities, supporting 100x hybrid electronic zoom (59x from the short-focus + 41x from the long-focus), bringing distant scenery into sharp focus.

Equipped with a thermal imaging camera with a resolution of 640x512, the C14 offers a wide field of view and clear images, enabling long-distance observation of various heat sources. In combination with a laser ranging module, the effective ranging distance can reach up to 1.2 kilometers. The industrial-grade three-axis stabilization structure significantly reduces frame jitter, keeping the image in a stable state at all times. It can be applied in fields such as fire rescue, animal protection, and security monitoring.

Skydroid C14 Gimbal main view
Figure 1: Skydroid C14 Gimbal main view
Video 1: Skydroid C14 Gimbal product showcase

2. What's in the Box (Product List)

The following items are included in your Skydroid C14 package:

  • C14 Main Body ×1
    Skydroid C14 Main Body
    Figure 2: C14 Main Body
  • Gimbal fixing screws (M2.5*6) ×4
    Gimbal fixing screws
    Figure 3: Gimbal fixing screws
  • Ethernet port power cable ×1
    Ethernet port power cable
    Figure 4: Ethernet port power cable
  • 32G Kingston Memory Card × 1 (Already installed)
    32G Kingston Memory Card
    Figure 5: 32G Kingston Memory Card
  • Card reader ×1
    Card reader
    Figure 6: Card reader

3. Product Overview (Interface and Definition)

The Skydroid C14 gimbal features several interfaces for power, control, and data transfer. Understanding these interfaces is crucial for proper setup and operation.

Product overview showing UART pins and TF card slot
Figure 7: C14 Interface and Definition Diagram

Interface Details:

  • UART Pins: TX, RX, GND for serial communication.
  • TF Card Slot: For inserting the MicroSD card for video recording and photo storage.

4. Specifications (Product Parameters)

C14 Overall Parameters:

Parameter Value
Video output signal interfaceEthernet Port
Control signal input interfaceEthernet Port
Operating Voltage12V~80V
Operating Current12V 350mA
Operating Temperature-10°C~+60°C
Storage Temperature-20°C~+60°C
Weight199g
Dimensions65.5mm (Length) × 68.57mm (Width) × 92mm (Height)
Controllable angle range-110° to +75° (Pitch axis); -165° to +165° (Yaw axis); -40° to +40° (Roll axis)
Stabilization Method3-axis Mechanical Stabilization
Angular JitterHovering: ±0.01°, Flying: ±0.02°
Video OutputRTSP
Control MethodUDP
Ceiling-mounted/Inverted-mounted modesupported
Global centering/One-key downward/Yaw centeringsupported

C14 Visible Light Camera Parameters:

Parameter Value
Lens pixel5 million
Video resolution for card recording2880*1620
CMOS size1/2.7
Video storage formatTS
Zoom Ratio100x Hybrid Electronic Zoom
Photograph resolution2880*1620
Video transmission resolution(1280*720)@30fps
Photograph storage formatJPG
Supported Memory Card TypeMicroSD Card (Max. 128GB)
Supported file systemsFAT32

C14 Short-focus Lens Parameters:

Parameter Value
ApertureF=2
Focal Length3.2mm
HFOV/VFOV/DFOV80°/61°/93°
Zoom Ratio59x

C14 Long-focus Lens Parameters:

Parameter Value
ApertureF=2.4
Focal Length25mm
HFOV/VFOV/DFOV14.7°/11.1°/18.3°
Zoom Ratio41x

C14 Thermal Imaging Camera Parameters:

Parameter Value
Resolution640*512
ApertureF=1.0
Focal length11mm
Pixel pitch10μm
Frame rate30Hz
Response band8~14µm
Thermal time constant< 12ms
Field of view angle32.84°x26.35°
Detection range1.1km

C14 Laser Ranging Parameters:

Parameter Value
Wavelength905nm
Detection range5M~1200M
Ranging capability≥1200 m (visibility: ≥ 10 km, humidity: ≤ 60%, building target)
≥500 m (visibility: ≥ 10 km, humidity: ≤ 60%, 1.7 m × 0.5 m humanoid target)
Ranging Accuracy≤±0.25m (≤300m), ≤±0.5m(300 < L≤ 1000m); ≤±2m (1000 < L)
Laser divergence angle5mrad
Measurement FrequencySingle, 1Hz, 2Hz
Transmitting ApertureΦ7mm
Accuracy rate≥99%
Receiving ApertureΦ7mm
False Alarm Rate≤2%

5. Setup (Installation and Debugging)

5.1 Gimbal Mounting

The C14 gimbal is mounted using M2.5*6 screws. Ensure proper alignment during installation to prevent damage and ensure optimal performance.

Screw hole diagram for gimbal mounting
Figure 8: Screw hole diagram for gimbal mounting (M2.5*6 screws, quantity 4)

Note:

  • Do not hang the gimbal on the aircraft when it is not in use. Long-term hanging will accelerate the deformation of the shock-absorbing balls, leading to a decline in shock-absorbing performance and the appearance of the "jello" effect.
  • When installing the gimbal, the shock-absorbing plates must be kept absolutely perpendicular and parallel to each other. Incorrect installation will cause the shock-absorbing balls to deform, leading to a decrease in shock-absorbing performance and failure of self-inspection.

5.2 Gimbal Wiring Diagram and Explanation

Connect the C14 gimbal to your drone's power and control system as shown in the diagram below.

Gimbal wiring diagram
Figure 9: Gimbal Wiring Diagram
Connection Details
PowerRed JST - 2P male connector. Power supply: 7.2V - 80V (DC power supply or lithium battery)
Ethernet cable (for signal transmission)Network IP signal: RX-, RX+, TX-, TX+
Video Transmission (Visible Light)RTSP stream rtsp://192.168.144.108:554/stream=1
Video Transmission (Thermal Imaging)RTSP stream rtsp://192.168.144.108:555/stream=2

5.3 FPV Software Installation and Startup

To operate the C14, install the latest version of the Gimbal FPV software on your remote control device.

  1. Software Download: Download the FPV software from: http://file.skydroid.xin/SkydroidCameraFPV.apk
  2. Gimbal Startup: After properly installing and fixing the gimbal, power it on. Wait for the gimbal to complete its startup sequence.
  3. Open FPV Software: Launch the Gimbal FPV software, select C14 as the connection method, and click to enter.
Skydroid C14 Gimbal FPV software screenshot
Figure 10: Gimbal FPV software startup screen

5.4 FPV Home Page Overview

The FPV software's home page provides access to various controls and settings for the C14 gimbal.

Gimbal FPV operating mode selection
Figure 11: FPV Home Page with controls (e.g., System Setting, Visible Light Video Window, Record Video, Take Photo, Thermal Imaging Video Window, Yaw Return to Center, Global Center Return, One Click Down, Crossline, Reverse Lines, Distance Measurement, Floating Window, Parameter Settings, Switch Connect, Long Focal Length, Electron Magnification, Short Focal Length)

6. Operating the Gimbal

6.1 Gimbal Working Modes

The gimbal can be configured for either top-mounted (hoisting) or inverted-mounted (flip) operation. The hoisting mode is the default factory setting.

Gimbal FPV operating mode selection
Figure 12: Operating Mode Selection (Hoisting Mode / Flip Mode)

Note: Please mount the gimbal correctly according to the selected working mode. Incorrect placement may cause damage to the gimbal motor.

6.2 Gimbal Parameter Settings

Access the parameter settings menu in the FPV software to configure various aspects of the gimbal's operation, including control, calibration, fine-tuning, operating modes, speed, and color palette.

Gimbal parameter settings menu
Figure 13: Gimbal Parameter Settings Menu

6.2.1 Gimbal Control

Within the Gimbal Control settings, you can choose from target following and three control methods. Multiple methods can be selected simultaneously, except for target following and gesture control which are mutually exclusive.

  • AI Target Following: After selecting a target, the C14 will automatically track it.
  • AI target following in FPV software
    Figure 14: AI Target Following
  • Virtual Joystick Control: Use the virtual joystick to control the pan and tilt. This also supports functions like one-key return to center.
  • Virtual joystick control in FPV software
    Figure 15: Virtual Joystick Control
  • Gesture Control: Control pan and tilt by swiping the screen.
  • Gesture control in FPV software
    Figure 16: Gesture Control
  • Remote Control Channel Control: Customize remote control channels for pan, tilt, photo, and video functions. (Refer to Remote Control Assistant -> Rudder Volume View for channel details).
  • Remote control channel settings in FPV software
    Figure 17: Remote Control Channel Settings

6.2.2 Gimbal Speed

Adjust the control speed of the gimbal. It supports both constant speed and variable speed modes.

Gimbal speed settings in FPV software
Figure 18: Gimbal Speed Settings

6.2.3 Color Palette (Thermal Imaging)

The thermal imaging camera offers eleven different color palette options to adjust the imaging effect.

Color palette options (White Hot, Ironbow, etc.)
Figure 19: Color Palette Options (Part 1)
More color palette options (Rainbow, Jungle, etc.)
Figure 20: Color Palette Options (Part 2)

6.2.4 Laser Ranging

Activate or deactivate the laser ranging function via the dedicated switch button. The effective ranging range is 5m to 1.2 km.

Laser ranging display in FPV software
Figure 21: Laser Ranging Display

6.2.5 Encoding Mode Settings

Configure display settings such as screen flipping, camera version number, and OSD (On-Screen Display) options.

Encoding mode settings in FPV software
Figure 22: Encoding Mode Settings

7. Maintenance

7.1 Gimbal Calibration

7.1.1 Temperature Calibration

Calibrate the gimbal's temperature during operation to prevent malfunctions caused by excessive temperature differences between the ambient environment and the IMU's operating temperature.

Temperature calibration option in FPV software
Figure 23: Temperature Calibration Option

7.1.2 Correction of Pot Lid Effect

The pot lid effect has been calibrated upon delivery. Due to the specialized calibration method, it is recommended not to calibrate it yourself unless absolutely necessary. If calibration is required, please contact Skydroid technicians for confirmation and guidance.

Pot lid effect calibration option in FPV software
Figure 24: Pot Lid Effect Calibration Option
Calibration Method:
  1. Power on the C14 and allow it to preheat for more than five minutes.
  2. Select a panel with a flat surface, uniform temperature, even frosting, and low reflectivity.
  3. Move the C14 close to and make contact with the target surface. Optimal positioning is when the imaging of the target surface covers the entire field of view without any stray light entering.
  4. Click "Calibrate the Lid Effect". Calibration is successful when the screen turns into a uniform gray.
Calibration target surface for pot lid effect
Figure 25: Calibration Target Surface for Pot Lid Effect

Note: The gimbal is factory-calibrated. Do not perform this operation unless gimbal malfunctions occur.

7.2 Firmware Upgrade

You can upgrade both the gimbal firmware and camera firmware through the FPV software. Ensure a stable power supply and do not exit the upgrade interface during the process. For camera firmware upgrades, a TF card must be inserted into the C14.

Firmware upgrade menu in FPV software
Figure 26: Firmware Upgrade Menu

8. Troubleshooting

If you encounter any difficulties or malfunctions with your Skydroid C14 gimbal, please refer to the following guidelines:

  • General Malfunctions: If the gimbal is not operating correctly, first review the installation and wiring steps to ensure everything is connected properly and securely.
  • Software Issues: Ensure you are using the latest version of the Gimbal FPV software. Check the encoding mode settings and other parameters for correct configuration.
  • Calibration Problems: If you suspect calibration issues, especially with the pot lid effect, it is strongly recommended to contact Skydroid technical support before attempting self-calibration due to the specialized nature of the process.
  • Firmware Update Issues: If a firmware update fails, ensure the power supply was stable and the TF card was correctly inserted (for camera firmware). Do not interrupt the update process.
  • Contact Support: For persistent issues or complex problems, do not attempt to disassemble the device. Contact Skydroid's after-sales service for professional repair.

9. User Tips

  • Storage: To maintain the shock-absorbing performance of the gimbal, avoid leaving it hanging on the aircraft when not in use for extended periods.
  • Mounting: Always ensure the gimbal is mounted correctly according to the selected operating mode (hoisting or flip) to prevent motor damage.
  • Calibration: The gimbal is factory-calibrated. Avoid unnecessary self-calibration, especially for the pot lid effect, unless instructed by Skydroid support.
  • Firmware Updates: During firmware upgrades, ensure uninterrupted power and do not exit the update interface. Remember to insert a TF card for camera firmware updates.

10. Warranty and Support

10.1 After-Sales Service Terms

Skydroid provides lifelong after-sales service for its products. If a quality problem is caused by non-human factors, it will be guaranteed free of charge within one year from the date of purchase. For man-made damage, modification, dismantling, or issues occurring after the one-year free warranty period, the user will be responsible for round-trip shipping and maintenance fees.

To ensure your rights and effective service, please complete the warranty card and retain your purchase voucher. These terms are primarily for products sold in Chinese Mainland; specific rules for Hong Kong, Macao, Taiwan, and overseas customers may vary.

10.2 Contact and Resources

  • After-Sales Service Hotline: 400-6996-520
  • Official QQ Chat Group: 318480806 (for questions and answers)
  • Overseas Customer Support Email: sales01@skydroid.xin
  • Official Website (for latest product information and manual updates): http://www.skydroid.xin/
  • User Manual (PDF): A PDF version of the user manual is available for download. Please refer to the official website for the most current version: Download PDF Manual

11. Important Safety Information (Precautions)

To protect yourself, others, and your device from harm, please read all the following information before using your Skydroid C14 gimbal:

  • Do not direct components to high-intensity radiation sources such as the sun.
  • The ideal operating ambient temperature ranges from -10℃ to 60°C.
  • Do not touch the device and cables with wet hands.
  • Do not bend or damage the connecting wires.
  • Do not clean your device with thinner.
  • Do not unplug or plug in other cables without disconnecting the power supply.
  • Do not misconnect the attached cables to avoid damaging the device.
  • Be careful to prevent static electricity.
  • Do not disassemble the device. If there is a malfunction, please contact our company and let professionals carry out the repair.
  • The use location should not have explosive media. The surrounding media should not contain gases that corrode metals and damage insulation, nor conductive media. The presence of excessive water vapor and severe mold is not allowed.
  • The use location should be equipped with facilities to protect against rain, snow, wind, sand, and dust.

Disclaimer: Since Skydroid cannot control specific user usage, installation, modification, and misuse, Skydroid will not assume liability for any direct or indirect losses or damages caused thereby. Users shall bear the corresponding consequences for installing, assembling, or using Skydroid Technology products.

© 2024 Skydroid Technology Co., Ltd. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.