FLYDIGI B9X

Contents

Flydigi B9X Magnetic Phone Cooler Fan

Model: B9X

Ultra Fast Heat Dissipation Frequency Conversion RGB Radiator for Mobile Devices

1. Product Overview

The Flydigi B9X is a magnetic phone cooler fan designed to provide ultra-fast heat dissipation for mobile devices, including iPhones, iPads, and Android phones. It features an innovative suction cooling structure, intelligent temperature control, and customizable RGB lighting.

Flydigi B9X Magnetic Phone Cooler Fan with USB cable and magnetic plates

Figure 1: Flydigi B9X Magnetic Phone Cooler Fan with included accessories.

Video 1: Product demonstration and feature highlights.

2. Setup Instructions

  1. Attach the Cooler: The Flydigi B9X features a magnetic attachment. Simply place the cooler onto the back of your compatible mobile device. For devices without built-in magnetic capabilities (e.g., some Android phones or iPads), use the provided magnetic plates. Adhere a magnetic plate to the back of your device or case, then attach the cooler to the plate.
  2. Power Connection: Connect the cooler to a power source using the included USB cable. For optimal performance and to achieve the advertised cooling capabilities, a 30W or higher fast charger (supporting PD fast charge protocol) is recommended.
  3. Initial Power On: Once connected to power, the cooler will automatically activate.
Flydigi B9X Magnetic Phone Cooler attached to a smartphone

Figure 2: Proper magnetic attachment of the cooler to a smartphone.

Flydigi B9X Magnetic Phone Cooler attached to various mobile devices including iPhone, Android, and iPad

Figure 3: The cooler is compatible with iPhone, Android, and iPad devices.

3. Operating Instructions

3.1 Basic Operation

The Flydigi B9X cooler begins operation automatically once connected to a suitable power source. The intelligent cooling system will adjust its performance based on the device's temperature.

3.2 Intelligent Cooling Technology

The B9X utilizes FlyOC™ Intelligent Frequency Conversion 4.0 technology. This system incorporates an NTC temperature detection sensor that constantly monitors the device's temperature and dynamically adjusts the cooling power. This ensures efficient cooling while actively preventing condensation, protecting your mobile device.

Flydigi B9X Cooler on phone showing no condensation, compared to a traditional cooler with condensation

Figure 4: The B9X's anti-condensation feature protects your device.

3.3 RGB Lighting and Customization

The cooler features an RGB lighting ring that visually indicates the frequency conversion and cooling status. You can customize the cooling modes and lighting effects using the dedicated Flydigi Game Hall APP.

Flydigi Game Hall APP interface for controlling cooler modes and RGB lighting

Figure 5: Control modes and lighting via the Flydigi Game Hall APP.

3.4 Quiet and Comfortable Design

The B9X is engineered for quiet operation, with a noise level of ≤35dB, thanks to its dual acoustic noise reduction system and large leaf silent fan. Its innovative four-sided air intake design ensures that hot air is not blown onto your hands, providing a more comfortable gaming or usage experience.

Diagram showing the cooler's dual acoustic noise reduction structure

Figure 6: Dual acoustic noise reduction for quiet operation.

Comparison of hand temperature with and without the cooler, highlighting the four-sided air intake

Figure 7: Four-sided air intake prevents hot air from blowing on hands.

4. Maintenance

  • Cleaning: Regularly wipe the exterior of the cooler with a soft, dry cloth to remove dust and debris.
  • Ventilation: Ensure that the air intake and exhaust vents are clear of obstructions to maintain optimal cooling performance.
  • Avoid Liquids: Do not immerse the cooler in water or expose it to excessive moisture. If it gets wet, disconnect power immediately and allow it to dry completely before reuse.

5. Troubleshooting

  • Cooler Not Turning On:
    - Ensure the USB cable is securely connected to both the cooler and a power source.
    - Verify that the power source (e.g., wall adapter, power bank) is functioning and provides sufficient power (30W+ recommended).
  • Insufficient Cooling:
    - Check if the cooler's vents are obstructed by dust or other objects. Clean if necessary.
    - Ensure the cooler is firmly attached to the device's back, making good contact for heat transfer.
    - Confirm you are using a 30W or higher fast charger. Lower wattage chargers may result in reduced cooling performance.
  • Excessive Noise:
    - While designed for quiet operation (≤35dB), unusual or excessive noise might indicate an obstruction in the fan. Disconnect power and gently check for any foreign objects.
  • Condensation on Device:
    - The Flydigi B9X is designed to prevent condensation. If condensation occurs, it might be due to extreme environmental conditions (e.g., very high humidity combined with rapid cooling) or a malfunction. Disconnect the cooler and contact support if the issue persists.

6. Specifications

FeatureDetail
Brand NameFLYDIGI
Model NumberB9X (also B9X-A variant)
Accessories TypeCooling Systems
With USBYes
Compatible Brand/ModelMobile Device (iPhone, iPad, Android)
Cooling TechnologyFlyOC™ Intelligent Frequency Conversion 4.0
Temperature DropUp to 45°C
Heat Dissipation EfficiencyIncreased by 100%
Cooling Chip Power30W heat-extrusion refrigeration chip
Fan Size50*50mm external large fan
Airflow Increase56%
Heat Sink120 ultra-thin aluminum FIN pieces, 400% increased heat dissipation area
Noise Level≤35dB
Package Dimensions (L x W x H)19cm x 9cm x 11cm
Package Weight0.22 kg
Diagram illustrating the B9X's cooling capabilities and features

Figure 8: Key features and performance metrics of the B9X cooler.

Comparison of Flydigi's self-developed suction cooling structure vs. traditional blowing structure

Figure 9: Structural comparison highlighting improved airflow and heat dissipation.

FPS performance comparison in 'Delta Action' game with B9X cooler

Figure 10: Gaming performance comparison showing stable 120FPS with B9X.

FPS performance comparison in 'King of Glory' game with B9X cooler

Figure 11: Gaming performance comparison showing stable 120FPS with B9X.

7. User Tips

  • Verify Authenticity: Some users inquire about the originality of the product. Always purchase from authorized sellers to ensure you receive a genuine Flydigi B9X cooler.
  • iPad M4 Attachment: For devices like the iPad M4 or other non-magnetic tablets/phones, ensure you use the provided magnetic plates for secure attachment. A compatible case might also offer better stability.
  • App Compatibility: The Flydigi B9X is designed to work with the Flydigi Game Hall APP for advanced controls and customization. Ensure you download the official app for the best experience.

8. Warranty and Support

For any product-related issues, technical assistance, or warranty claims, please contact the seller or manufacturer's customer support. The product typically includes a 90-day free return policy, allowing for returns within this period if you are not satisfied with your purchase.

© 2024 Flydigi. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.