1. Introduction
Thank you for choosing the HXCONTROLLER MPPT Solar Charge Controller. This manual provides essential information for the safe and efficient operation of your solar charge controller. Our advanced Maximum Power Point Tracking (MPPT) technology ensures you get the absolute maximum power from your solar panels, boosting energy harvest by up to 30% compared to traditional PWM controllers. Please read this manual thoroughly before installation and use.

Figure 1: HXCONTROLLER MPPT Solar Charge Controller Overview
2. Key Features
- Maximum Energy Yield: Intelligently tracks the optimal voltage-current curve (MPP) of your panels in real-time, adapting to changing light and weather conditions to extract every available watt.
- Superior Efficiency: Industry-leading conversion efficiency of up to 99%, minimizing losses between your panels and batteries. High tracking efficiency up to 98%.
- Wide Voltage Compatibility: Handles higher panel input voltages (Max 250VDC), allowing for more flexible, cost-effective string configurations and reduced wiring costs.
- Smarter Battery Management: Multi-stage adaptive charging (Bulk, Absorption, Float, Equalization) prolongs battery life for various battery types including lead-acid (Sealed, Flooded, AGM, GEL), Lithium (LiFePO4), and user-defined batteries (12V/24V/48V/60/72/84/96/108/120V).
- Robust & Reliable: Built with premium components for superior heat dissipation and protection against reverse polarity, over-current, over-temperature, and short circuits.
- Intuitive Monitoring: Clear LCD display and built-in Wi-Fi connectivity provides real-time data on power, voltage, energy history, and system status right on your smartphone.
3. Safety Instructions
- Read all instructions in this manual before installation.
- Do not disassemble or attempt to repair the controller yourself. Contact qualified personnel for service.
- Ensure all wiring is correctly polarized and securely connected to prevent damage to the controller and other components.
- Always disconnect the solar panel and battery power before installing or adjusting the controller.
- Install the controller in a well-ventilated area, away from flammable materials and direct sunlight.
- Wear appropriate personal protective equipment (PPE) during installation.
4. Package Contents
Your package should contain the following items:
- HXCONTROLLER MPPT Solar Charge Controller Unit
- User Manual (this document)
- Mounting Accessories (screws, etc.)
5. Setup
5.1 Physical Installation
- Choose a dry, cool, and well-ventilated location for installation.
- Mount the controller vertically on a wall or sturdy surface to allow for proper heat dissipation.
- Ensure there is sufficient clearance around the controller for airflow.

Figure 2: Controller Dimensions and Terminal Layout
5.2 Wiring Instructions
Follow the wiring diagram carefully. Connect components in the following order:
- Connect the Battery: Connect the battery to the controller's battery terminals (B+ and B-). Ensure correct polarity. The controller will detect the battery voltage.
- Connect the Solar Panels: Connect the solar panels to the controller's PV terminals (P+ and P-). Ensure correct polarity. The controller will begin charging.
- Connect the DC Load (Optional): Connect your DC load to the controller's load terminals (L+ and L-).

Figure 3: System Wiring Diagram
Important: PV Panel Input Voltage
The minimum PV input voltage must be 20V higher than the battery's maximum voltage. The maximum PV input voltage is 250VDC. Exceeding these limits can damage the controller.

Figure 4: PV Input Voltage Requirements

Figure 5: Example of Solar Panel Series Connection for 250V VOC Input
5.3 Initial Configuration (LCD)
Use the MENU, UP, DOWN, and BACK buttons on the controller's LCD to navigate and adjust settings.

Figure 6: LCD Main Menu Options
- Battery Type Setting: Navigate to 'Battery Type' to select your battery chemistry (e.g., Sealed, GEL, Flooded, AGM, Lithium, or User-defined). For user-defined, you can adjust parameters like Vmin and Vmax.
- Max Charge Current: Set the maximum charging current according to your system's requirements (e.g., 40A, 60A, 80A).
- DC-OUT Setup: Configure the DC load output settings (e.g., Auto, By PV, By Time).
- Time Adjust: Set the current date and time for accurate data logging.
- Language: Select your preferred language (English or Portuguese).
Video 1: Demonstrating LCD Menu Navigation and Settings
5.4 WiFi Setup and App Monitoring
The controller features built-in WiFi for remote monitoring via a smartphone app. The app name is ESP RainMaker.
- Download the 'ESP RainMaker' app from your device's app store (available for iOS and Android).
- Follow the in-app instructions to connect your controller to your home WiFi network.
- Once connected, you can monitor real-time data such as PV Voltage, PV Current, Charging Power, Power Generation (KWH), Battery Voltage, Battery Current, and Core Temperature.

Figure 7: ESP RainMaker App Interface for iOS and Android
6. Operating Instructions
6.1 LCD Display Monitoring
The LCD provides a quick overview of your system's status. Use the UP/DOWN buttons to cycle through different display screens, showing:
- Power Generation
- PV Voltage
- Battery Voltage
- Charging Current
- Power Generation Operating Status
- Daily Power Generation Line Chart
- Monthly Power Generation Chart
6.2 MPPT Charging Mode
The controller utilizes a 4-stage MPPT charging process to optimize battery health and longevity:
- Bulk Charge: Delivers maximum current to rapidly charge the battery.
- Boost Charge: Charges the battery to a higher voltage to ensure full charge.
- Float Charge: Maintains the battery at a safe voltage to prevent overcharging.
- Equalization Charge: Periodically overcharges lead-acid batteries to balance cell voltages and prevent sulfation.

Figure 8: MPPT 4-Stage Charging Mode and Supported Battery Types
7. Specifications
| Feature | HX40A | HX60A | HX80A |
|---|---|---|---|
| MPPT Maximum Charging Current | 40A | 60A | 80A |
| Adjustable PV Charging Current | 0-40A | 0-60A | 0-80A |
| PV Max Open-Circuit Input Voltage | 250V | ||
| Battery Voltage | 12/24/36/48/60/72/84/96/108/120V | ||
| Battery Type | Ternary lithium, lithium iron phosphate batteries, lead-acid batteries, gel batteries, and User-defined | ||
| PV Min Operating Input Voltage | Must be over 5V higher than the battery pack voltage | ||
| Charging Mode | MPPT Automatic Maximum Power Point Tracking | ||
| PV Minimum Startup Voltage | PV voltage is 5V higher than battery voltage (enables low-current charging even on rainy or cloudy days) | ||
| LCD Press Buttons | LCD Display: Power Generation, PV Voltage, Battery Voltage, Charging Current, Power Generation Operating Status, Daily Power Generation Line Chart, Monthly Power Generation Chart | ||
| Output Voltage | Follows Battery Pack Voltage | ||
| DC Output Configuration | Off, Auto | ||
| Whether Wi-Fi Function | Built-in Wi-Fi + APP Remote Monitoring | ||
| Standby Power Consumption | 3W | ||
| Overall Efficiency | 99% | ||
| Protection Functions | PV Array Protection: Short Circuit, Overvoltage, Overcurrent, Reverse Polarity; Battery Protection: Overcharge, Reverse Polarity, Undervoltage | ||
| Language type | English and Portuguese | ||
| Equipment Protection Rating | 0-3000m | ||
Table 1: Detailed Specifications
8. Maintenance
- Regularly inspect all wiring for loose connections, corrosion, or damage.
- Keep the controller clean and free from dust and debris. Ensure ventilation openings are not blocked.
- Check battery terminals for corrosion and clean if necessary.
- Monitor system performance via the LCD or app to detect any anomalies early.
9. Troubleshooting
If you encounter issues, refer to the following common problems and solutions:
- No Display/No Power: Check battery connections and ensure the battery has sufficient charge. Verify all fuses in the system.
- No Charging: Check solar panel connections and ensure they are receiving adequate sunlight. Verify PV input voltage is within the specified range (min 5V higher than battery voltage, max 250V).
- Battery Not Fully Charged: Ensure the correct battery type is selected in the settings. Check for shading on solar panels or insufficient panel capacity.
- Load Not Working: Check load connections and ensure the load is within the controller's rated capacity. Verify DC-OUT settings are configured correctly (e.g., 'Auto' or 'By Time' is enabled).
- WiFi Connection Issues: Ensure the controller is within range of your WiFi router. Double-check WiFi password and network settings in the app. Try resetting the WiFi on the controller via the LCD menu.
10. User Tips
- For optimal performance, ensure your solar panels are clean and free of obstructions.
- Periodically check the battery's state of charge and overall health, especially for lead-acid batteries.
- Utilize the mobile app for long-term data logging to track your system's energy production and consumption patterns. This can help identify potential issues or areas for optimization.
- When connecting multiple solar panels, ensure they are of the same type and rating for balanced performance.
11. Warranty and Support
This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the seller's contact information or the official product page. Keep your purchase receipt as proof of purchase.