1. Introduction
The FALCAM F22 & F38 Quick Release Camera Cage is designed to enhance the functionality and protection of your Canon C50 camera. Featuring a modular design and quick-release systems (F22 and F38), it allows for versatile accessory mounting and rapid transitions between different shooting setups, including horizontal and vertical orientations. This manual provides detailed instructions for assembly, operation, and maintenance to ensure optimal performance and longevity of your camera cage.
2. Package Contents
Please check the package to ensure all items are present:
Camera Cage (Model C00B5B02)
- Camera Cage x1
- Top Plate x1
- Cable Clamp x1
- Universal Cable Clamp x1
- 1/4" Screw (C12MP005) x2
- 1/4" Screw (C33MP008) x4
- H2.5 L-Wrench x1
- Nylon Anti-Loosening Washer x1
- Stainless Steel Anti-Loosening Washer V2 x1
- H4 Hex Wrench x1
- Wrench Plate x1
- User Manual x1
Optional: Hand Grip Kit (Model F22A3A12)
- F22 Portable Top Hand Grip x1
3. Key Features
- Compatibility: Specifically designed for Canon C50, ensuring a perfect and secure fit.
- Modular Design: Offers flexible setups for various creative needs, allowing for full cage, L-bracket, or detachable top plate configurations.
- F22 & F38 Quick Release System: Enables instant setup and accessory swapping without the need for screws, facilitating rapid transitions between tripods, grips, and other accessories.
- Multiple Mounting Points: Equipped with Cold Shoe mounts, 1/4" threaded holes, and ARRI locating holes for extensive accessory expansion.
- 3-Point Lock: Provides rock-solid stability and zero twist for secure camera mounting.
- HDMI Cable Clamp: Secures HDMI cables to prevent accidental disconnection and ensure reliable signal transmission.
- Horizontal & Vertical Shooting: Quick release mounts on the bottom and sides allow for instant switching between horizontal and vertical shooting orientations.
- Integrated Magnetic Wrench: For effortless setup and adjustments, the wrench stays attached when removed, eliminating storage concerns.
- Anti-Slip Pads: Large anti-slip pads protect your camera from scratches and wear.
- Lanyard Compatibility: Features shoulder and wrist strap mounts for secure carrying.
4. Setup Instructions
4.1 Attaching the Camera Cage
- Ensure your Canon C50 camera is powered off.
- Align the camera with the base plate of the cage. The cage is designed for a precise fit, so ensure proper orientation.
- Secure the camera to the cage using the provided 1/4" screws. The cage features a 3-point lock system for rock-solid stability. Use the included H2.5 L-Wrench or H4 Hex Wrench for tightening.
- Verify that the camera is firmly seated and does not twist or move within the cage.
4.2 Attaching the Top Plate (if applicable)
- Align the top plate with the mounting points on the top of the camera cage.
- Secure it using the appropriate screws and wrenches.
4.3 Attaching the HDMI Cable Clamp
- Locate the HDMI port on your camera and the corresponding mounting point on the cage.
- Attach the cable clamp to the cage using the provided screw.
- Insert your HDMI cable and adjust the clamp to securely hold both the cable body and the connector, preventing accidental disconnections.
4.4 Attaching the F22 Portable Top Hand Grip (if included)
- Identify the F22 quick release mount on the top plate or cage.
- Slide the F22 Portable Top Hand Grip onto the F22 mount until it clicks into place.
- Ensure the grip is securely locked. To remove, press the release button and slide it off.
5. Operating Instructions
5.1 Using F22 & F38 Quick Release Systems
The F22 and F38 quick release systems allow for rapid attachment and detachment of accessories and mounting to tripods or other support systems.
- Attachment: Align the F22/F38 compatible accessory or plate with the corresponding mount on the cage. Push firmly until it locks into place.
- Detachment: Press the release button or lever on the quick release mount and slide the accessory off.
5.2 Horizontal and Vertical Shooting
The cage features quick release mounts on the bottom and sides, enabling seamless switching between horizontal and vertical shooting modes without tools.
- To switch orientation, detach the camera from its current mount (e.g., tripod).
- Re-attach the camera cage to the desired F22 or F38 quick release mount on your tripod or support system in the new orientation.
5.3 Accessory Mounting
Utilize the various mounting points for your accessories:
- Cold Shoe: For microphones, LED lights, or other cold shoe compatible accessories.
- 1/4" Threaded Holes: For articulating arms, monitors, or other 1/4" screw accessories.
- ARRI Locating Holes: For ARRI-standard accessories, providing anti-twist security.
6. Maintenance
- Cleaning: Wipe the camera cage with a soft, dry cloth to remove dust and fingerprints. For stubborn dirt, use a slightly damp cloth and then dry thoroughly. Avoid harsh chemicals or abrasive materials.
- Inspection: Regularly check all screws and quick release mechanisms for tightness and proper function. Re-tighten any loose screws using the provided wrenches.
- Storage: Store the camera cage in a dry, clean environment away from extreme temperatures and humidity when not in use.
- Anti-Loosening Washers: The cage includes anti-loosening washers. Ensure these are correctly placed during assembly to maintain secure connections.
7. Troubleshooting
- Camera not fitting securely: Ensure the camera is correctly aligned with the cage's mounting points. Double-check that all screws are tightened. The 3-point lock system requires proper alignment.
- Accessories feel loose: Verify that quick release mechanisms are fully engaged and locked. For threaded mounts, ensure screws are tightened. Check if anti-loosening washers are used where appropriate.
- HDMI cable disconnecting: Ensure the HDMI cable clamp is properly installed and adjusted to firmly hold both the cable and its connector.
8. Specifications
Camera Cage (Model C00B5B02)
| Attribute | Value |
|---|---|
| Model Number | C00B5B02 |
| Color | Black |
| Net Weight | Approx. 221g / 7.79oz |
| Material | 6061 Aluminum Alloy |
| Dimensions (WxHxD) | Approx. 165*107.65*86mm / 6.5*4.24*3.39in |
| Configured For | DSLR Cameras (Canon C50) |
| Cage Type | Camera Cage |
Hand Grip (Model F22A3A12 - if included)
| Attribute | Value |
|---|---|
| Hand Grip Model | F22A3A12 |
| Hand Grip Material | 6061 Aluminum Alloy + Micarta |
| Hand Grip Net Weight | 164.5g |
| Hand Grip Color | Grey |
| Hand Grip Dimensions | 144*78*23mm |
9. User Tips
No specific user tips are available from reviews or Q&A at this time. Always ensure all connections are secure before use to prevent damage to your equipment.
10. Warranty and Support
10.1 Warranty Information
This product comes with a 365-day free warranty for quality-related issues. Please retain your proof of purchase for warranty claims.
10.2 Contact Information
For any inquiries or support, please contact the seller or manufacturer. All messages or emails will be answered within 24-48 hours in working days.