1. Introduction
The SHIDU S92 is a highly integrated portable voice amplifier designed for clear and powerful sound amplification. It features UHF wireless technology, Bluetooth 4.0, and supports multiple audio playback options, making it ideal for teachers, public speakers, and various outdoor activities. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your device.
Main Features:
- SHIDU patented appearance with a stylish, ergonomic, and comfortable design.
- UHF high-frequency wireless PA technology with a transmission distance of up to 35m.
- Double-emission and double-receiving function, allowing simultaneous use of hand-held and waist-hanging UHF wireless microphones.
- 3.5-inch Hi-Fi double magnetic big-size trumpet, with a maximum peak output of 25W.
- Adopts SHIDU original sound amplification electroacoustic system for real and stable sound amplification.
- Bluetooth 4.0 for cloud control, supporting audio file playback from mobile devices and tablet PCs.
- Built-in 2pcs * 3.7V/2000mAh Lithium battery for extended use.
- Super MP3 decoding technology with support for TF card & USB flash disk.
- Equipped with SHIDU original microphone for Hi-Fi acoustic amplification.
- Supports synchronous Karaoke.
2. Package Contents
Please check the package contents upon unboxing:
- SHIDU S92 Voice Amplifier Unit
- Hand-held Wireless Microphone
- Waist-hanging UHF Wireless Transmitter (U5 launcher) with Headset Microphone
- Power Adapter (EU, UK, or US Plug available)
- USB Charging Cables
- User Manual (PDF available online)

3. Setup Instructions
3.1 Initial Charging
It is recommended to fully charge the voice amplifier and both wireless microphones before first use to ensure optimal battery life and performance.
3.2 Waist Hanging UHF Wireless Transmitter (U5 Launcher) Setup

- Insert Wired Microphone: Insert the wired headset microphone into the "MIC" input port of the waist hanging UHF wireless transmitter.
- Turn On/Off: Switch the wheeled power switch to "ON". The battery level indicator will light up. To turn off, switch the wheeled power switch to "OFF"; the indicator will go out.
- UHF Frequency Pairing:
- Turn on the UHF wireless voice amplifier. Long press the "UHF" key on the amplifier until the red indicator light flashes, indicating it's in UHF wireless pairing status.
- Long press the "Pair" key on the waist hanging UHF wireless transmitter. It will enter UHF wireless pairing status, and the red power indicator will stay on, confirming successful pairing. You can now speak into the microphone.
- To pause UHF wireless amplification, short press the "UHF" key on the voice amplifier.
- To exit UHF wireless amplification mode, long press the "Pair" key on the waist hanging UHF wireless transmitter.
- Volume Adjustment: In UHF wireless amplification mode, adjust the volume using the wheeled volume switch on the transmitter. Alternatively, use the "+" and "-" buttons on the voice amplifier.
- Charging: Refer to the "Charging" section for detailed instructions.
3.3 Hand-held UHF Wireless Microphone Setup

- Turn On/Off: Long press the power button to turn on; the blue indicator light will stay on. Long press again to turn off; the blue indicator light will go out.
- UHF Frequency Pairing:
- Turn on the UHF wireless voice amplifier. Long press the "UHF" key on the amplifier until the red indicator light flashes.
- Turn on the Hand-held MIC, then quickly short press the power button three times. It will enter UHF wireless pairing status. The red indicator light on the voice amplifier will stop flashing and stay on, confirming successful pairing. You can now speak.
- After successful pairing, short press the "UHF" key on the voice amplifier to pause UHF wireless amplification mode. Short press again to resume.
- Charging: Refer to the "Charging" section for detailed instructions.
4. Operating Instructions

4.1 Voice Amplifier Controls
- Power Switch: Long press the power button to turn on (red light on). Long press again to turn off (red light off).
- Mode Key (M): Short press "M" to switch between U disk, TF card, AUX, and Bluetooth modes.
- Play/Pause: In TF card or Bluetooth mode, short press the Play/Pause button to pause, and short press again to play.
- UHF Mode Key (UHF): In power-on status, short press "UHF" to activate UHF wireless amplification mode. Short press again to deactivate. Long press this key for manual UHF frequency pairing.
- Next/Fast Forward: In TF card or Bluetooth mode, short press the Next button for the next song. In TF card mode, long press for fast forward (not supported in Bluetooth mode).
- Previous/Fast Backward: In TF card or Bluetooth mode, short press the Previous button for the previous song. In TF card mode, long press for fast backward (not supported in Bluetooth mode).
- Volume +: Short press "+" to increase volume incrementally. Long press to increase volume rapidly.
- Volume -: Short press "-" to decrease volume incrementally. Long press to decrease volume rapidly.
- Battery Capacity Display: In power-on status, short press volume "+" or "-" to display the current battery level.
4.2 Bluetooth Pairing
- Turn on the SHIDU S92 voice amplifier. It will enter Bluetooth mode by default or switch to Bluetooth mode using the "M" key.
- On your Bluetooth device (e.g., smartphone, tablet), enable Bluetooth and scan for devices.
- Select "SD-S92" from the list of available devices. Once connected, you will hear a voice prompt: "Bluetooth connected".
4.3 Media Playback
- TF Card: Insert a TF card into the designated slot. The amplifier supports MP3, WMA, WAV, APE, and FLAC audio formats. Use the Play/Pause, Next, and Previous buttons to control playback.
- USB Disk: Insert a USB flash disk into the designated slot. The amplifier supports MP3, WMA, WAV, APE, and FLAC audio formats. Use the Play/Pause, Next, and Previous buttons to control playback.
- AUX Input: Connect an external audio source (e.g., phone, computer) to the 3.5mm Aux In port using an audio cable. Switch the amplifier to AUX mode using the "M" key.
4.4 Wired Microphone Use
The voice amplifier supports a wired microphone. Simply insert the wired microphone (included in the standard package) into the Ø3.5mm Microphone Jack to amplify your voice.
5. Charging
5.1 Voice Amplifier Charging
When the first frame of the battery icon flashes, it indicates a low battery and requires charging. Use the provided DC 9V power charger. Connect the charger to the DC 9V charging slot on the amplifier and plug it into a 100~240V AC socket. The battery icon will flash from the first to the fourth frame during charging. All four frames will light up when fully charged.
5.2 Waist Hanging UHF Wireless Transmitter Charging
The battery level indicator shows "Full" (blue lights for 100%), "Half" (yellow lights for 50%), and "Low" (red lights for low battery). When the red light indicates low battery, charge it promptly. Turn off the transmitter, connect the DC 5V charger, and plug it into a 100~240V socket. The "Half" and "Low" indicators will flash during charging, and all three lights will stay on when fully charged.
5.3 Hand-held UHF Wireless Microphone Charging
If the red indicator on the Hand-held MIC flashes, it indicates a low battery. Please charge it in a timely manner. Switch off the microphone before charging. The red indicator light will flash during charging and will remain on when fully charged. Use a 5V 500mA ~1.5A adapter for charging. The typical charging time is 2~3 hours.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid completely draining the battery frequently. If storing for a long period, charge the battery to about 50% and recharge every few months.
- Water Resistance: The device features waterproof buttons and material. However, avoid submerging it in water or exposing it to heavy rain for extended periods.
7. Troubleshooting
7.1 Howling/Feedback Issues
Problem: The amplifier produces a high-pitched squealing sound (howling).
Solution: Before turning on the voice amplifier, ensure that the microphone is not pointed directly at the speaker to prevent howling. Maintain a distance of more than 60 cm (approximately 2 feet) between the voice amplifier and the microphone. Tucking the speaker around your waist and wearing the headset microphone over your head can help achieve the required distance and minimize feedback.
7.2 Microphone Not Pairing
Problem: Wireless microphone fails to pair with the amplifier.
Solution: Ensure both the amplifier and microphone are turned on and fully charged. Follow the specific UHF pairing steps for each microphone type carefully (Section 3.2.3 and 3.3.2). If issues persist, try resetting both devices and attempting pairing again.
7.3 No Sound Output
Problem: No sound is coming from the amplifier.
Solution: Check the volume levels on both the amplifier and the connected microphone/audio source. Ensure the correct mode (UHF, Bluetooth, AUX, TF, USB) is selected. Verify that all cables are securely connected. If using a wireless microphone, confirm it is paired correctly.
7.4 Short Battery Life
Problem: The device's battery life is shorter than expected.
Solution: Ensure the device and microphones are fully charged before use. High volume levels or continuous use of multiple features (e.g., Bluetooth and amplification) can consume battery faster. Check for any background processes or connections that might be draining power. Ensure you are using the correct charger.
8. Specifications
| Feature | Specification |
|---|---|
| Output Power | 25W |
| Charging Voltage | DC 9V, 1A |
| Lithium Battery | 7.4V, 2pcs * 2000mAh (Amplifier) / 1500mA (U5 Transmitter) / 1800mA (Handheld Mic) |
| Working Time (50% Volume) | 6~8 Hours (Musical Mode), 8~10 Hours (MIC Mode) |
| Charging Time | 3-5 Hours (Amplifier), 2-3 Hours (Microphones) |
| Product Size (WxHxD) | 125*100*58mm |
| Unit Weight | 468g |
| Working Temperature | -10℃~45℃ |
| Frequency Response | 90Hz~18KHz |
| Sound Coverage | 2500㎡ |
| Wireless Distance | 30-50m (UHF) |
| Material | ABS |
| Battery Included | Yes |
| Inbox Adaptor | Yes |
| Power Source | AC&DC |
| Support MP3 | Yes |
| Support MP4 | No |
| Voice Record | Yes |
| Certification | CE, FCC |
9. User Tips
- For optimal amplification and to avoid feedback (howling), always ensure the microphone is not pointed directly at the speaker. A distance of over 60 cm (2 feet) between the microphone and the amplifier is highly recommended. Wearing the speaker on your waist and the headset microphone on your head can effectively help maintain this distance.
- The SHIDU S92 is noted for its good quality and usefulness, especially in educational settings like classrooms.
10. Warranty and Support
SHIDU Guarantee: We offer 100% SHIDU Guaranteed Product Satisfaction and a 1-year warranty.
If you have any questions or require assistance, please do not hesitate to contact us. We are committed to providing the best possible service.
Website: www.10shidu.com
Email: info@10shidu.com
A detailed user manual in PDF format is also available for download: SHIDU S92 User Manual (PDF)