LiTime 12V 140Ah H190

Contents

LiTime 12V 140Ah H190 Deep-Cycle LiFePO4 Battery User Manual

Intelligent Lithium Iron Phosphate Battery with Bluetooth 5.0 and Advanced BMS

LiTime 12.8V 140Ah LiFePO4 battery with Bluetooth app interface

LiTime 12.8V 140Ah LiFePO4 battery shown with its Bluetooth app interface for real-time monitoring.

Introduction

Thank you for choosing the LiTime 12V 140Ah H190 Deep-Cycle LiFePO4 Battery. This battery is engineered for high performance and longevity, making it an ideal power solution for mobile homes, RVs, marine applications, and off-grid systems. Featuring integrated Bluetooth 5.0 for smart monitoring and an advanced 150A Battery Management System (BMS), it ensures reliable and safe operation across various demanding environments.

Setup and Installation

1. Unpacking and Inspection

Carefully unpack the battery and inspect it for any signs of physical damage. If damage is found, do not proceed with installation and contact customer support immediately.

2. Physical Installation

  • Dimensions: The battery measures 35.8 cm (Length) x 17.7 cm (Width) x 18.9 cm (Height) and weighs 12.96 kg.
  • Placement: This battery is designed for under-seat installation in EU mobile homes, conforming to DIN H8 / L5 Group 49 standards.
  • Mounting: Ensure the battery is securely mounted in a well-ventilated area to prevent movement during operation.
Dimensions and weight of the DIN H8 L5 battery for EU mobile homes

Physical dimensions and weight of the LiTime 12V 140Ah battery, designed for under-seat installation.

3. Electrical Connection

  • Cable Sizing: Use appropriate gauge cables for your application to handle the expected current draw.
  • Polarity: Connect the positive (+) terminal of the battery to the positive (+) terminal of your system, and the negative (-) terminal to the negative (-).
  • Tightness: Ensure all terminal connections are clean, secure, and properly torqued to prevent resistance and overheating.
  • Series/Parallel Configuration: The battery supports a maximum configuration of 4 batteries in series and 4 batteries in parallel (4S4P) for increased voltage or capacity.

4. Bluetooth App Setup

  • Download the official LiTime app from your smartphone's app store.
  • Enable Bluetooth on your device and open the LiTime app.
  • The app will automatically detect nearby LiTime batteries. Select your battery to pair and begin monitoring.
Bluetooth 5.0 app interface showing real-time battery status in a mobile home setting

The LiTime app provides real-time monitoring of battery status via Bluetooth 5.0.

Operating Instructions

1. Charging the Battery

  • Recommended Specifications: Use a LiFePO4 compatible charger with Constant Current/Constant Voltage (CC/CV) charging profile, 14.4 V ± 0.2 V, and 20A.
  • Compatible Sources: The battery can be charged using dedicated LiFePO4 chargers, solar panels (recommended ≥400W), or generators.
  • Low-Temperature Charging Protection: The integrated BMS will automatically stop charging if the battery temperature drops below 0°C. Charging will resume independently once the temperature rises to 5°C or above.
Various charging methods: LiFePO4 battery charger, solar panel, generator

Multiple charging options are available for the LiTime LiFePO4 battery, including dedicated chargers, solar, and generators.

2. Discharging the Battery

  • Continuous Discharge: The 150A BMS allows for a continuous discharge current of up to 150A, suitable for high-power devices.
  • Peak Discharge: The battery can deliver a peak discharge current of 700A for 1 second.
  • Low-Temperature Discharging Protection: Discharging will be automatically interrupted if the battery temperature falls below -20°C to protect the cells and ensure safety.
Detailed low-temperature protection: discharge stops below -20°C, charging stops below 0°C, charging resumes at ≥5°C

The battery features intelligent low-temperature protection for both charging and discharging.

3. Bluetooth Monitoring and Control

  • Use the LiTime app to monitor real-time battery parameters such as State of Charge (SOC), voltage, current, power, temperature, and life cycles.
  • The app allows for remote switching of the battery system on/off.
  • Multiple batteries can be managed simultaneously through the app.

4. Typical Applications

This battery is ideal for powering a wide range of devices in:

  • Mobile homes and RVs (e.g., coffee machines, air conditioning, microwaves, refrigerators).
  • Marine applications (e.g., trolling motors, navigation equipment).
  • Off-grid power systems.
Powering various devices with estimated runtimes

Estimated runtimes for various devices powered by the LiTime 12V 140Ah battery.

Maintenance

1. General Care

  • Regularly inspect battery terminals for corrosion and keep them clean and tight.
  • Keep the battery clean and free from dust and debris. The IP65 rating provides protection against dust and water jets.

2. Storage

  • For long-term storage, ensure the battery is charged to approximately 50% of its capacity.
  • Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures.

3. BMS Protection Features

The advanced 150A BMS provides over 20 protection functions to ensure the battery's safety and longevity:

  • Overcharge Protection
  • Deep Discharge Protection
  • Overcurrent Protection (with automatic recovery after 30 seconds)
  • Overheating Protection
  • Short Circuit Protection
  • Low Temperature Protection (for charging and discharging)
  • Moisture Protection
  • Salt Spray Resistance
  • Intelligent Pre-charging Function
LiTime Intelligent BMS Design highlighting 20 protection measures

The LiTime Intelligent BMS provides comprehensive protection for the battery.

Troubleshooting

Problem Possible Cause Solution
Battery not charging Temperature below 0°C; Charger not connected or faulty; Charger specifications incorrect. Move battery to warmer environment (above 0°C); Check charger connections; Ensure charger meets recommended specifications (14.4V ± 0.2V, 20A).
Battery not discharging/powering devices Temperature below -20°C; Overcurrent protection triggered; Loose connections. Move battery to warmer environment (above -20°C); Wait 30 seconds for BMS auto-recovery from overcurrent; Check and tighten all electrical connections.
Bluetooth connectivity issues App outdated; Battery out of range; Bluetooth interference. Update LiTime app; Ensure battery is within Bluetooth range; Restart app/phone; Try connecting in a different location.

Specifications

Feature Specification
Brand Name LiTime
Model 12V 140Ah H190
Nominal Voltage 12.8V
Energy 1792Wh
Material ABS
Dimensions (L x W x H) 35.8cm x 17.7cm x 18.9cm
Item Weight 12.96kg
Recommended Charging Spec CC/CV | 14.4 V ± 0.2 V | 20A
BMS Continuous Current 150A (max. continuous charging/discharging)
Max. Discharge Current (Peak) 700A @ 1Sec
Internal Resistance ≤ 40mΩ
Cycle Life (100% DOD) 4000+ cycles
Cycle Life (80% DOD) 6000 cycles
Cycle Life (60% DOD) 15000 cycles
Estimated Lifespan Approx. 10 years
Operating Temp (Charging) 0°C to 45°C (stops below 0°C, resumes at 5°C)
Operating Temp (Discharging) -20°C to 60°C (stops below -20°C)
IP Rating IP65
Max. Configuration 4 Series, 4 Parallel (4S4P)
Certifications ECE R10 Certified
Performance metrics and protection features of the LiTime 12V 140Ah battery

Key performance metrics and comprehensive protection features.

Cycle life details and lifespan of the LiTime 12V 140Ah battery

Detailed cycle life performance at various depths of discharge and estimated lifespan.

Warranty and Support

  • Warranty: The LiTime 12V 140Ah H190 battery comes with a 5-year service warranty.
  • Lifespan: The battery is designed for an estimated lifespan of approximately 10 years, with over 4000 cycles at 100% Depth of Discharge (DOD).
  • Technical Support: For any technical assistance, troubleshooting beyond this manual, or warranty claims, please contact LiTime customer support.

User Tips

  • This battery is ECE R10 certified, confirming its suitability for use in vehicles and ensuring electromagnetic compatibility.
  • The product is recognized for its quality and adherence to specifications, offering reliable performance.
  • Always verify the specific warranty terms and conditions provided with your purchase for detailed coverage information.

Frequently Asked Questions (FAQ)

Q: Is this battery ECE R10 certified?
A: Yes, the LiTime 12V 140Ah H190 battery is ECE R10 certified, making it suitable for various vehicle applications.
Q: What is the warranty period for this battery?
A: The battery comes with a 5-year service warranty and has an estimated lifespan of approximately 10 years.
Q: Can I monitor the battery status remotely?
A: Yes, with integrated Bluetooth 5.0, you can monitor real-time values like SOC, voltage, current, temperature, and life cycles via the LiTime app. You can also remotely switch the system on/off.
Q: What happens if the temperature drops below freezing?
A: The battery features intelligent low-temperature protection. Charging automatically stops below 0°C and resumes at 5°C. Discharging is interrupted below -20°C to ensure safety and optimal performance.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.