HORLAT X09MAX

Contents

HORLAT X09MAX Google Android 11 TV Projector User Manual

Model: X09MAX | Brand: HORLAT

Introduction

Thank you for purchasing the HORLAT X09MAX Google Android 11 TV Projector. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your new projector. Please read it thoroughly before use and keep it for future reference.

HORLAT X09MAX Projector with Google TV and Netflix logos

The HORLAT X09MAX Projector, featuring Google TV and licensed Netflix.

Important Safety Instructions

Failure to follow these instructions may result in physical injury, data loss, or product damage, and will void the warranty.

Setup

  • Do not install the projector in places without proper ventilation.
  • Avoid hot, humid, dusty, or smoky environments.
  • Do not block ventilation holes (intake or exhaust).
  • Keep the projector away from temperature and smoke detectors to prevent sensor failure.
  • Do not install the projector where warm or cool air blows directly onto it, as this can cause moisture condensation or temperature-related failures.

Power Supply

  • Always power off the device before removing the power supply.
  • Handle the power cord with care to avoid bending, which can cause electric shock or fire.
  • Unplug the device during lightning storms or when unused for extended periods.
  • Never touch the power cable or connection with wet hands.
  • Unplug the power cord from the outlet after use.

Caution

  • Avoid looking directly into the lens to prevent severe eye injury.
  • The area near the air outlet will become hot during and after use; avoid touching it to prevent burns.
  • Do not place the projector in excessively warm or cold rooms (optimal working temperature: 5°C-35°C) as extreme temperatures can shorten its lifespan.

Packing List

Ensure all items are present in the package:

Diagram showing all items included in the HORLAT X09MAX projector package.

Contents of the HORLAT X09MAX package.

  • Projector (X09MAX)
  • Remote Control (Batteries not included)
  • HDMI Cable
  • AV Cable
  • Power Cable
  • User Manual
  • Lens Cap

Projector Overview

Front and Top View

Diagram of the projector's front and top panel with numbered labels.

Front and top view of the projector.

  1. Lens cap
  2. Camera
  3. IR receiver
  4. IR receiver
  5. AV interface
  6. 3.5mm port for audio output
  7. HDMI
  8. USB port
  9. WAN
  10. Speaker
  11. Power interface

Top Panel Buttons

  1. Power Switch
  2. Signal Source
  3. Confirm Button
  4. Menu Button
  5. Back Button
  6. Direction Button
Diagram of the projector's rear panel with labeled ports and buttons.

Rear panel connections and controls.

Remote Control

The remote control allows for easy navigation and control of the projector's functions.

Diagram of the remote control with numbered buttons and their functions.

Remote control layout and button functions.

  1. Power Switch
  2. Voice remote control
  3. Menu Button
  4. Confirm Button
  5. Direction Button
  6. Back Button
  7. Home Button
  8. Volume+
  9. Volume-
  10. Mute
  11. Signal Source
  12. Set up
  13. Projection Settings
  14. Lens Forward
  15. Lens Backward
  16. Enter with one click (for Netflix, YouTube, Prime Video, Disney+)

Setup

Projector Placement

The projector can be placed in various positions:

  • Front projection ceiling mount
  • Rear projection ceiling mount
  • Front projection table mount
  • Rear projection table mount
Diagrams illustrating different projector placement options: front/rear projection, ceiling/table mount.

Various projector placement options.

Note:

  • Maintain a gap of at least 30 cm from walls.
  • Do not cover or block the projector's vents.
  • If ceiling mounted with a screen, the projector should not be higher than the screen's upper edge.

Ceiling Installation

To install the projector on the ceiling:

  1. Purchase a universal projector ceiling mount.
  2. Remove the four rubber pads on the bottom of the projector to reveal the screw holes.
  3. Use M4*10mm screws to attach the projector to the ceiling mount.
Diagram showing the screw holes on the bottom of the projector for ceiling mounting.

Projector bottom with screw holes for ceiling installation.

Operating Instructions

Power On

  1. Plug the power cord into an outlet.
  2. Remove the lens cap.
  3. Press the power button on the projector or remote control to turn it on.

Adjusting Projected Image (Autofocus)

After adjusting the projector's size and distance, if the image is unclear, press the F+/F- buttons on the remote control to adjust until a clear image is obtained.

Icons for autofocus adjustment.

Autofocus adjustment icons.

Auto Obstacle Avoidance (Autofocus)

  1. Use the 'Projection Settings' button on the remote control to select 'Advanced Settings'.
  2. In the 'Advanced Settings' menu, select 'Automatic Obstacle'. The projector will refocus and automatically avoid obstacles by shrinking the display screen.
Screenshot of the projector's settings menu showing 'Automatic Obstacle' option.

Settings menu for auto obstacle avoidance.

Auto Access Screen (Autofocus)

  1. Use the 'Projection Settings' button on the remote control to select 'Advanced Settings'.
  2. In the 'Advanced Settings' menu, select 'Automatic screen entry'. The projector will refocus and adjust the screen size to fit the screen.

Note: The projection curtain needs to have a black border for successful automatic entry. Ensure the corners of the curtain are within the projection screen when automatic entry is active.

Screenshot of the projector's settings menu showing 'Auto access screen' option and a prompt to ensure screen corners are within the white area.

Settings menu for auto access screen.

Manual Four-Point Keystone Correction

  1. Use the 'Projection Settings' button on the remote control to select 'Advanced Settings'.
  2. In the 'Advanced Settings' menu, select 'Image Correction'. Press the confirmation key to enter manual keystone correction. Use the remote control direction keys to zoom the screen size, and press the confirmation key to switch to the next corner.

Note: The projection screen can only be reduced, not enlarged. If the screen cannot be covered, move the projector back. After adjusting the screen, turn off autofocus and auto trapezoid in advanced settings.

Input Source (HDMI Mode)

  1. Connect the projector to your device using an HDMI cable.
  2. Press and hold the 'Source' button on the projector or remote control to enter the input source interface and select HDMI.
  3. Select the HDMI input (HDMI1 or HDMI2) corresponding to your connection. Press OK to enter, and the back key to exit.

Input Source (AV Mode)

  1. Connect the projector to your device using an AV cable.
  2. Press and hold the 'Source' button on the projector or remote control to enter the input source interface.
  3. Select AV. Press OK to enter, and the back key to exit.

Input Source (USB Mode)

  1. Connect a USB disk to the projector. The USB disk will be highlighted on the main projection screen interface.
  2. Select the corresponding file type (Movie, Music, Picture, Office Suite) and press OK to enter the file.

Screen Mirroring

To mirror your screen wirelessly:

  1. Connect both your phone and the projector to the same Wi-Fi network.
  2. For Apple phones: Swipe up to access the options interface, tap the screen mirror icon, select the projector name (e.g., 'TV Stick'), and tap 'Connect'.
  3. For Google phones: Swipe down to access the options interface, select 'Screen Cast', select the projector name (e.g., 'TV Stick'), and tap 'Connect'.
Screenshots showing screen mirroring setup for both Apple and Google phones.

Screen mirroring setup for mobile devices.

Bluetooth Connection

To connect external speakers or headphones via Bluetooth:

  1. Use the remote control or projector button to enter the projector's settings interface.
  2. Find 'Bluetooth settings' in the settings interface. Press OK to enter.
  3. Select 'Add accessory'. A list of Bluetooth devices will be displayed.
  4. Select your Bluetooth speaker/headphone from the list and press OK to pair.
  5. Once successfully connected, it will show as 'Connected' on the Bluetooth device.
Screenshots showing the Bluetooth settings menu for adding accessories.

Bluetooth connection settings.

User Tips

  • The integrated Google TV system allows direct streaming with smooth operation and clear images.
  • The projector boasts solid build quality, a crisp image, and a quiet fan.
  • It offers excellent cost performance with all core functions working effectively.
  • The projector is surprisingly bright for its price point, performing well even in well-lit rooms.
  • Connecting a phone for screen mirroring is quick, and the quality is impressive.
  • The menus are simple and intuitive, making it easy for users of all technical levels.
  • Enjoy natural and accurate colors, with lifelike tones without oversaturation.
  • The built-in Google TV eliminates the need for external devices, supports original apps, and offers fast operation with convenient voice control.
  • AI Auto Focus and Keystone correction save time, providing excellent sharpness and vibrant colors.
  • WiFi 6 ensures stable streaming, and Bluetooth 5.2 allows for external speaker connection without audio delay.
  • The Google certified Android system supports OTA updates for continuous improvement.
  • With native 1080p resolution and 4K scaling, the image remains sharp and detailed.
  • The compact design is quiet, unobtrusive, and takes up minimal space.

Troubleshooting

Q1: Blurry Image

  • Ensure the projection distance is greater than the minimum projection distance of 1.53 m.
  • Adjust the focus ring.

Q2: No Signal Displayed

  • Verify all cables are connected correctly and securely to the projector.
  • Check that the projector's input source mode is selected to match the connected device (e.g., if using HDMI, select the corresponding HDMI input channel).

Q3: Remote Unresponsive

  • Point the remote directly at the IR receiver.
  • Do not cover the IR receiver.
  • Try a new pair of AAA batteries.

Q4: Projector Shuts Down Automatically

  • Check if the projector's air inlet and outlet are blocked.
  • Ensure the local mains voltage is stable and within the acceptable range (not too low, too high, or fluctuating).

Specifications

FeatureSpecification
Display TechnologyLCD
Light SourceLED
Aspect Ratio16:9/4:3/Auto
FocusManual
Keystone CorrectionManual Correction, Electronic Correction, Auto Correction (±30°)
Projective ModeThrowing, Ceiling, Back Projection, Mirror Image
Power SupplyAC100-240V, 50/60Hz
Speaker15W*2 (Built-in)
Projector Size246(L)*207(W)*169(H)mm
Unit Net Weight3.3kg
Photo Format SupportJPG/JPEG/PNG/BMP
Audio Format SupportMP3/APE/AAC/FLAC/OGG/WAV/WMA/MID
Video Format Support3GP/AVI/FLV/MP4/MPG/VOB/TS/M2TS/RMVB/MKV
PortsHDMI *1, USB 2.0 *1, 3.5mm Earphone Out, POWER
Voltage RangeHigh voltage (50-1000V DC, 75-1000V AC)
Remote Controller IncludedYes
Bluetooth-compatibleYes (Bluetooth 5.4)
CategoryProjectors
Ansi Lumens3500
SystemAndroid (Google Android 11 TV)
Projected Dimension50-400 inches
Projection TechnologyLED
Screen Scale4:3/16:9
Zoomx 1.4
PortableNo
UseHome
TypeDigital Projector
Home Theater ProjectorYes
Projection Distance1.5-10m
Weight3.3kg
Contrast Ratio20,001:1-50,000:1
Brightness50000 Lumens
Display Size≤13.5
FunctionVideo Playback, Others
Control MethodVoice, Remote, Touch
Inbox AdaptorYes
StructureWith a flat panel screen
OriginMainland China
Optical Resolution1920x1080dpi
Power (W)115W
CertificationCE, FCC, RoHS, UL, WEEE
Support FeaturesAuto Keystone, Automatic obstacle avoidance, Automatic entry
Support Mobile Hard Disk1T, U disk FAT32: 8G/16G/32G, 64G
Processor TypeHI3751/GPU Mali-450MP2
Functional InterfaceAUDIO out x1, Panel buttons (Power, Left, Right, Up, Down, OK, BACK, Source, Pause)
Light Source Life>100,000 hours
Model NameX09MAX
AC110-240V
Latency15ms
Remote ControlBluetooth 5.4
Storage2 GB RAM + 8 GB ROM
Supported TechnologiesHDR10, Red and Blue 3D, 4K, 8K decoding
Languages52 Kinds (English, German, French, Spanish, Polish, etc.)

Warranty and Support

The HORLAT X09MAX Projector comes with a 1-year warranty. The advanced LED light source lamp has a lifespan of up to 100,000 hours. The diffuse reflection imaging design is also designed to protect your eyes.

For any issues or support inquiries, please refer to the SAV (Service Après-Vente) email address provided in the original user manual (PDF). You can access the PDF manual here for contact information and further details.

© 2024 HORLAT. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.