Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your RAYKUBE EG one Tuya BLE Smart Electronic Door Lock and FP01 Wireless Fingerprint and PIN Keypad Kit. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Product Components
The RAYKUBE EG one + FP01 Kit includes the following items:
- Door lock x 1
- Wireless Keypad (FP01) x 1
- Base plate x 1
- Clutch assembly x 4
- Mounting Adhesive Pad x 1
- Screw Kit x 2
- IC card x 5
- User Manual x 1 (Refer to the PDF version for full details)
Setup and Installation
The RAYKUBE EG one smart lock is designed for easy, drill-free installation, making it suitable for various door types and scenarios. It can be installed using either adhesive for temporary use or screws for permanent fixture.
Compatibility
The lock is compatible with 99.9% of door types. Swappable inserts allow compatibility with fission and conjoined locks. Ensure your door's C-zone (the distance from the center of the cylinder to the edge of the door) exceeds 45mm for proper fitment.
Installation Methods
- Adhesive Installation (Temporary/Drill-free): For quick and temporary setup, use the durable, removable adhesive pad provided. This method requires no drilling and can be easily removed without damage.
- Screw Installation (Permanent): For a permanent and secure installation, use the included screws and screwdriver. This method ensures a robust fixture without modifying your existing door lock mechanism.
For detailed step-by-step installation instructions, please refer to the User Manual (PDF) mentioned in the Product Components section.
Operating Instructions
The RAYKUBE EG one + FP01 Kit offers multiple convenient ways to unlock your door.
Unlocking Methods
- Fingerprint Unlock: Place your registered fingerprint on the sensor on the FP01 keypad. The lock will disengage upon successful recognition. The system supports up to 100 fingerprint users.
- Password Unlock: Enter your registered PIN on the FP01 keypad. The lock will disengage upon correct entry.
- IC Card Unlock: Tap a registered IC card on the designated IC Card Sensor Area of the FP01 keypad. The lock will disengage. The system supports up to 100 IC card users.
- Tuya APP Bluetooth Unlock: Use the Tuya or Smart Life app on your smartphone to unlock the door via Bluetooth. This method allows for remote unlocking and management.
- Original Key Unlock: In case of emergency or battery depletion, the lock can still be opened using your door's original mechanical key.
Tuya App Features
The Tuya/Smart Life app provides advanced control and monitoring capabilities:
- Remote Unlock: Unlock the door remotely for guests (requires Bluetooth connection).
- Real-time Access Logs: View a log of all lock and unlock events, including method and user, directly from the app.
- Temporary Passwords: Generate temporary passwords for visitors or service providers.
- Auto Lock: Enable and configure the auto-lock feature with a customizable delay (e.g., 10 seconds) to automatically secure your door after it closes.
- Member Management: Add, modify, or delete users (fingerprints, passwords, IC cards) through the app.
Video Demonstration
Maintenance
Battery Replacement
The lock is powered by 4 AA batteries (not included). The battery life is designed for 1000-1500 unlock cycles. Replace batteries when the low battery indicator appears or when performance degrades. Always use high-quality AA batteries for optimal performance.
Cleaning
Wipe the lock and keypad surfaces with a soft, dry cloth. Avoid using abrasive cleaners or solvents, which can damage the finish or electronic components.
Troubleshooting
- Lock not responding: Check battery levels. Replace batteries if necessary. Ensure Bluetooth is enabled on your smartphone for app control.
- Fingerprint/Password/IC Card not recognized: Ensure your fingerprint, password, or IC card is correctly registered. Clean the fingerprint sensor. Try re-registering if issues persist.
- Auto-lock not working: Verify that the auto-lock feature is enabled in the Tuya/Smart Life app and the delay time is set correctly.
- App connectivity issues: Ensure your phone's Bluetooth is on and within range of the lock. Restart the app or your phone if necessary.
- Emergency Unlock: If all electronic methods fail, use the original mechanical key to unlock the door.
Specifications
| Feature | Detail |
|---|---|
| Model | EG one + FP01 Kit |
| Product Dimensions | 138mm (Height) x 60mm (Width) x 63mm (Depth) |
| Body Material | Aluminium alloy, ABS and PC |
| Color | Black |
| Connectivity | Bluetooth 4.0 and above |
| Power Supply | 4 x AA Dry Batteries (not included) |
| Battery Endurance | 1000-1500 unlock times |
| App Support | Tuya / Smart Life APP |
| OS Compatibility | Android 5.0+ / iOS 11.0+ |
| Operation Temperature | -20℃ to 45℃ |
| Unlocking Methods | Fingerprint, Password, APP Bluetooth, IC Card, Original Key |
| Fingerprint Users | Up to 100 |
| IC Card Users | Up to 100 |
| Installation Method | Punch-free (adhesive) or Screw-fixed |
| Suitable Door Type | Steel Door, Wooden Door, Brass Door, Stainless Steel Door, Other (C-zone > 45mm) |
Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact RAYKUBE Official Store customer service. Refer to the provided User Manual (PDF) for additional contact information or detailed warranty terms.
The full user manual is available as a PDF document: User Manual (PDF).
User Tips
- Ensure the door surface is clean and dry before applying the adhesive for installation.
- Regularly check the battery status via the Tuya/Smart Life app to avoid unexpected lockouts.
- Keep your original mechanical key in a safe, accessible location outside the locked area for emergency use.
- When setting up passwords, use a combination that is easy for you to remember but difficult for others to guess.
- For optimal security, register multiple fingerprints for different fingers or users.
