Introduction
The Retekess guest paging system utilizes RF wireless technology to enhance communication and service efficiency in various establishments. It consists of a transmitter and multiple guest pagers, designed for use in fast-food restaurants, coffee shops, pizza shops, 4S stores, churches, and other venues where guests await service. This system aims to improve overall operational efficiency, customer satisfaction, reduce labor costs, and enhance your establishment's image.
Package Contents
Ensure all items are present in your package:
- Transmitter Keyboard x1
- Pagers x30
- Power Adapter x1
- Advertising Sticker x30
- Packaging Box x1
- User Manual x1

Functional Diagram
The system comprises a main transmitter keyboard and individual guest pagers. Below is a diagram illustrating the key components:

- Transmitter Keyboard: Features a digital display, keypad for input, and charging slots for pagers. Includes a power input and antenna.
- Pager: Equipped with a built-in battery, charging indicator, and capable of flashing light, vibration, and sound alerts.
Setup
1. Initial Charging
Before first use, ensure all pagers are charged for at least 10 minutes. Connect the transmitter to the power supply and place the pagers into the charging slots. The charging indicator on the pagers will flash quickly during charging and remain solid when fully charged. Pagers will automatically turn on and begin charging once inserted into the slots.
2. Pairing Operation
To pair pagers with the transmitter, follow these steps:
- On the charging mode (transmitter display shows '000'), long press the [Set] key for 3 seconds to enter the setting mode. 'F1' will appear on the display.
- Press the [Call] key to enter the pairing mode. The charging indicators on pagers will turn off, and other indicators will turn on. '000' will show on the display.
- Remove a pager from the charging slot. Within 10 seconds, enter the desired pager ID (1-997) through the keyboard.
- Press the [Call] key to confirm. The pager will beep, indicating successful pairing.
- Repeat steps 3 and 4 to pair additional pagers.
- Press the [Back] key twice to exit the setting mode.
Note: If no operation occurs within 10 seconds after removing a pager from the charging slot, the system will automatically exit the pairing mode.
Operating Instructions
1. Calling a Pager
In Call Mode (transmitter displays '000'), enter the desired pager number using the keypad and press the [Call] key to alert the corresponding pager. The pager will vibrate, beep, or flash according to its alert settings.
2. Group Call Function
To call all non-charging pagers simultaneously, enter '998' on the transmitter keyboard in Call Mode and press the [Call] key.
3. Call History
The transmitter can display the 10 most recently called numbers. Press the [△] or [▽] key to scroll through the call history. You can re-call a number from the history by pressing the [Call] key when it's displayed.
4. Turn Off Pagers
To turn off all charging pagers, enter '999' in Call Mode and press the [Call] key. All charging indicators will turn off for 5 seconds and then light up again to indicate the charging status. The indicator light goes out when the pager is taken out of the charging slot after shutting down. To turn pagers back on, insert them into the charging slots and connect the transmitter to the power source.
Note: This instruction is not valid for pagers that are not currently charging.
5. One-Touch Mute
Pagers feature a one-touch mute button to instantly silence alerts, preventing disturbance in quiet environments. Simply press the mute button on the pager to toggle the alert sound.

Customization and Settings
1. Change Advertising Pager
Each pager has a transparent cover allowing for customizable advertising paper. To change the message, simply remove the transparent cover, replace the advertising paper with your desired message, and re-insert the cover.

2. Prompt Settings (F2)
This setting allows you to choose from 7 alert combinations (light, vibration, sound) for the pagers.
- On the charging mode, long press [Set] key for 3 seconds to enter setting mode ('F1' displayed).
- Press the [△] key to navigate to 'F2'.
- Press the [Call] key to enter the sub-menu.
- Use the [△] or [▽] keys to select the desired prompt mode (000-012).
- Press the [Call] key to confirm. The transmitter will beep, and 'F2' will be displayed.
- Press the [Back] key to exit the setting mode.
Prompt Mode Codes:
- 000: Keyboard prompt mode: Mute
- 001: Keyboard prompt mode: Beep
- 002: Keyboard prompt mode: Vibration
- 003: Keyboard prompt mode: Beep and Vibration
- 004: Pager prompt mode: Beep
- 005: Pager prompt mode: Vibration
- 006: Pager prompt mode: LED Flash
- 007: Pager prompt mode: Beep and Vibration
- 008: Pager prompt mode: Vibration and LED Flash
- 009: Pager prompt mode: Beep and LED Flash
- 010: Pager prompt mode: Beep and Vibration and LED Flash
- 011: Pager prompt mode: Beep at a slower pace
- 012: Pager prompt mode: Beep at a fast pace (factory default)
3. Prompt Time Setting (F3)
This setting allows you to adjust the duration of the pager alerts (1-999 seconds).
- On the charging mode, long press [Set] key for 3 seconds to enter setting mode ('F1' displayed).
- Press the [△] key twice to navigate to 'F3'.
- Press the [Call] key to enter the sub-menu.
- Enter the desired prompt time (1-999S) through the keyboard.
- Press the [Call] key to confirm. The transmitter will beep, and 'F3' will be displayed.
- Press the [Back] key to exit the setting mode.
4. Transmitter ID Setting (F4)
This setting allows you to change the transmitter's ID (1-999).
- On the charging mode, long press [Set] key for 3 seconds to enter setting mode ('F1' displayed).
- Press the [△] key three times to navigate to 'F4'.
- Press the [Call] key to enter the sub-menu.
- Enter the desired transmitter ID (1-999) through the keyboard.
- Press the [Call] key to confirm. The transmitter will beep, and 'F4' will be displayed.
- Press the [Back] key to exit the setting mode.
Note: You must re-pair all pagers after changing the transmitter ID.
Maintenance
1. Battery Information and Charging
The pagers are equipped with a 200mAh Lithium-ion Polymer Battery (model: 402030, 3.7V, 0.74Wh). For optimal battery life and safety:
- Turn off your radio before charging.
- Charge batteries at an ambient temperature between 10℃ and 40℃. Charging below 0℃ is prohibited.
- Rechargeable batteries must be charged with the dedicated charger provided for each piece of equipment before first use.
- Rechargeable batteries should only be charged by adults or children at least 8 years old under adult supervision.
- Pull by the plug rather than the cord when disconnecting the charger.
- Unplug the charger from the AC outlet before attempting any maintenance or cleaning.
2. Charger Warnings
- Do not use the charger outdoors or in moist environments; use only in dry locations/conditions.
- Do not disassemble the charger, as this may result in a risk of electrical shock or fire. A charger should only be dismantled by trained personnel.
- Do not operate the charger if it has been broken or damaged in any way.
- An extension cord should not be used unless absolutely necessary. If an extension cord must be used, ensure its pins match the charger's plug in number, size, and shape, and that the cord is properly wired and in good condition. Ensure the cord is placed to avoid being stepped on, tripped over, or subjected to damage/stress.
Troubleshooting
If you encounter issues, consider the following:
- Pager not responding: Ensure the pager is within the 800m communication range of the transmitter. Check if the pager is charged. Re-pair the pager if necessary.
- Interference: If experiencing interference, ensure the transmitter and pagers are not near other electronic devices or large metal objects. Try changing the transmitter ID and re-pairing pagers.
- Pager not turning off: Ensure the pager is placed in a charging slot and the '999' command is correctly entered and sent.
- System not entering pairing mode: Ensure the [Set] key is pressed for the correct duration (3 seconds) and that no pager is removed from the charging slot for more than 10 seconds during the process.
Specifications
| Component | Parameter | Value |
|---|---|---|
Transmitter Keyboard![]() | Modulation Method | OOK |
| Transmit Frequency | 433.92MHz | |
| Display | 3-digit LED display, red | |
| Power Supply | DC12/2A | |
| Rated Power | 30dBm/1W | |
| Antenna | 433.92MHz rubber rod antenna | |
| Interface | DC power interface | |
| Communication Distance | 800M | |
| Dimensions | 226*288*31mm | |
Pager![]() | Modulation Method | OOK |
| Receive Frequency | 433.92MHz | |
| Display | Flashing light, vibration, sound alert | |
| Operating Voltage | 3.7V | |
| Operating Current | <250mA | |
| Standby Current | <12mA | |
| Standby Time | 24 hours | |
| Charging Current | 70-90mA | |
| Battery Capacity | 200mAh | |
| Dimensions | 100*50*10mm |
Safety and Compliance
Please read the following safety and compliance information carefully to ensure safe operation and to comply with applicable regulations.
1. RF Energy Exposure and Product Safety Guide
This device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction. However, to avoid exceeding RF exposure limits:
- DO NOT operate the radio without a proper antenna attached. Use only the antenna supplied by the manufacturer or one specifically authorized for this radio.
- To avoid interference, turn off the radio in areas where signs are posted (e.g., hospitals, aircraft, blasting sites).
2. Avoid Choking Hazard

The product contains small parts and is not suitable for children under 3 years of age.
3. Protect Your Hearing

- Use the lowest volume necessary.
- Increase volume only in noisy surroundings.
- Reduce volume before adding a headset or earpiece.
- Limit the time you use headsets or earpieces at high volume.
- When using the radio without a headset or earpiece, do not place the radio's speaker directly against your ear.
- Excessive sound pressure from earphones and headphones can cause hearing loss.
Note: Exposure to loud noises for extended periods may temporarily or permanently affect your hearing. The louder the volume, the less time is required before hearing damage occurs.
4. FCC Requirements
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
5. CE Requirements
HONG KONG RETEKESS CO., LIMITED declares that the radio equipment type is in compliance with RED Directive 2014/53/EU, ROHS Directive 2011/65/EU, and WEEE Directive 2012/19/EU. The full text of the EU declaration of conformity is available at www.retekess.com.
6. IC Requirements
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
User Tips
- Regular Charging: Always ensure pagers are fully charged before use to guarantee all-day performance.
- Optimal Placement: Position the transmitter in a central location to maximize the 800m communication range and minimize signal obstructions.
- Customize Alerts: Utilize the 7 alerting modes to tailor notifications (light, vibration, sound) to suit different environments, such as noisy kitchens or quiet dining areas.
- Personalize Pagers: Take advantage of the customizable advertising paper to display promotions, welcome messages, or branding.
- Test Range: Periodically test the system's range in your specific environment to identify any dead zones or areas with weak signals.
Warranty and Support
Most new products carry a two-year manufacturer's warranty from the date of purchase. For warranty service, you will need to provide a receipt or proof of purchase from the actual seller for verification.
Exclusions from Warranty Coverage:
- Damage caused by accident.
- Damage resulting from misuse or abuse of the product, or unauthorized alterations or repairs.
- If the serial number has been altered, defaced, or removed.
Contact Information:
For assistance regarding repairs and service, please contact Retekess Official Store. You can find more information and approved accessories on their website: www.retekess.com
EU Representative:
Germany Retevis Technology GmbH
Uetzenäcker 29, 38176 Wendeburg
Email: Retevis-Europa@outlook.com
Tel: +0049 053029369179
Manufacturer:
HONG KONG RETEKESS CO., LIMITED
Add: FLAT/RM 1019B 10/F LIVEN HOUSE NO.61-63 KING YIP STREET KWUN TONG KL
Email: support@retekess.com

