1. Introduction
The Beitian BT-B445 is a high-precision, long-distance RTK wireless data transmission radio module designed for reliable one-to-one two-way communication. Operating within the 902-928MHz frequency band, it offers a transmission distance of up to 12 kilometers and supports both Master (M) and Slave (S) modes. Its robust aviation aluminum shell ensures durability and efficient heat dissipation.

2. Safety Information
- Ensure proper power supply (3.7-5.5V) to prevent damage to the module.
- Do not operate the module without the antenna connected.
- Keep the module away from water, moisture, and extreme temperatures.
- Handle with care to avoid physical damage to the connectors and internal components.
- This device is intended for use in Vehicles & Remote Control Toys, specifically Airplanes.
3. Package Contents
The BT-B445 module is available in different packages. Please verify your specific package contents.
Standard Package (Pair)
- BT-B445 body x2
- 915MHz Rubber antenna x2
- USB to Type-C cable x1
- DATALINK data transmission line x1
Digital Transmission Package (Single)
- BT-B445 body x1
- 915MHz Rubber antenna x1
- USB to Type-C cable x1

4. Product Overview
The BT-B445 module features a compact design with essential ports and controls for easy integration and operation.

- M/S Switch: Toggles between Master (M) and Slave (S) modes for network configuration.
- BIND Button: Used for one-click signal matching between modules.
- USB Port: For power supply and data connection.
- Antenna Connector: Standard connector for attaching the included 915MHz rubber antenna.
- LED Indicator: Provides status feedback (e.g., power, connection status).

5. Setup
- Attach Antenna: Carefully screw the 915MHz rubber antenna onto the antenna connector of each BT-B445 module. Ensure it is finger-tight.
- Power Supply: Connect each module to a 3.7-5.5V power source using the provided USB to Type-C cable. The module can be powered via the USB port.
- Mode Selection: Use the M/S switch to set one module as 'Master' (M) and the other as 'Slave' (S) for one-to-one communication. For relay mode, configure as per your specific network requirements.
- Signal Matching (Binding):
- Power on both modules.
- Press and hold the 'BIND' button on both modules simultaneously until the LED indicators show a successful connection (refer to LED status in troubleshooting if unsure).
- The modules are now paired for data transmission.
- Connect to Device: Use the DATALINK data transmission line to connect the module to your RTK system or other compatible device. The module supports both TTL and USB ports for data communication.
6. Operating Instructions
6.1 Data Transmission
Once the modules are powered and successfully bound, they will establish a two-way communication link. Data can be transmitted between the connected devices at an air speed of up to 1Mbps.
6.2 Network Modes
- One-on-One Communication: Set one module to Master (M) and the other to Slave (S) using the M/S switch. This establishes a direct, dedicated link.
- Relay Mode: The BT-B445 supports relay functionality for extending the transmission range or overcoming obstacles. Specific configuration details for relay mode may vary depending on your application and external software/hardware.
6.3 UART Baud Rate Adjustment
The UART Baud Rate is adjustable to match the requirements of your connected device. Supported baud rates include 9600, 19200, 38400, 57600, 115200, and 230400. Refer to your device's documentation for the correct baud rate setting.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the module. Avoid using liquid cleaners or solvents.
- Storage: Store the module in a dry, cool place when not in use.
- Antenna Care: Ensure the antenna is not bent or damaged, as this can affect signal quality and range.
- Firmware Updates: Check the manufacturer's website periodically for any available firmware updates to improve performance or add features.
8. Troubleshooting
- No Power: Ensure the USB cable is securely connected and the power source is active (3.7-5.5V). Check the LED indicator for power status.
- No Connection/Binding Issues:
- Verify both modules are powered on.
- Confirm one module is set to Master (M) and the other to Slave (S).
- Repeat the binding process (Section 5, Step 4).
- Ensure antennas are properly attached.
- Check for obstructions between modules or excessive distance.
- Data Transmission Errors:
- Verify the UART Baud Rate setting matches your connected device.
- Check the data transmission line for secure connections and damage.
- Ensure the modules are within the effective transmission range (12KM).
- Interference: If experiencing poor signal quality, try relocating the modules to an area with less electromagnetic interference.
9. Specifications
| Feature | Specification |
|---|---|
| Model Number | BT-B445 |
| Name | Data transmission module |
| Working Frequency | 902-928MHz |
| Transmission Distance | 12KM |
| Air Speed | 1Mbps |
| UART Baud Rate | Adjustable (9600, 19200, 38400, 57600, 115200, 230400) |
| Input Voltage | 3.7-5.5V |
| Working Current | 5V@85mA |
| Size | 39 * 31 * 15mm |
| Material | Composite Material (Aviation Aluminum Shell) |
| For Vehicle Type | Airplanes |
| Use | Vehicles & Remote Control Toys |
| Is Electric | No Battery |
| Is Batteries Included | No |

10. User Tips
- The BT-B445 module is noted for its robust and well-made construction, suggesting good durability for its intended use.
- Always double-check the model number upon receipt to ensure you have the correct BT-B445 module for your application.
11. Warranty & Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.