1. Introduction
Thank you for choosing the FMART T11 Window Cleaning Robot. This intelligent device is designed to simplify window cleaning with its advanced features, including 4-way ultrasonic spray, powerful suction, smart navigation, and comprehensive safety protections. Please read this manual carefully before using the product to ensure safe and optimal performance.
2. Package Contents
Before you begin, please check the package to ensure all items are present:
- 1 x Main Body (FMART T11 Robot)
- 1 x Power Plug
- 1 x Adapter
- 1 x Power Cord
- 1 x Safety Rope (4m)
- 1 x Water Filling Bottle
- 1 x Remote Control
- 1 x User Manual
- 12 x Cleaning Cloths
3. Safety Information
Please observe the following safety precautions:
- Always attach the safety rope securely before operating the robot, especially on high windows. The 4m climbing-grade safety rope has a 1393N load capacity.
- Ensure the power cord is properly connected and secured to prevent accidental disconnection.
- Do not use the robot on cracked or damaged glass surfaces.
- Keep the robot away from children and pets during operation.
- The built-in UPS (Uninterruptible Power Supply) provides up to 20 minutes of backup power in case of an outage, allowing you to retrieve the robot safely.
- The robot features edge detection sensors and an upgraded safety algorithm for secure operation.
4. Setup
4.1 Attaching Cleaning Cloths
- Ensure the robot is powered off.
- Attach two clean cleaning cloths to the bottom rotating discs of the robot. Ensure they are securely fastened and cover the entire disc surface.
4.2 Filling the Water Tank
- Locate the water tank cap on the robot.
- Open the cap and use the provided water filling bottle to fill the 100ml tank with clean water or a recommended window cleaning solution.
- Close the cap securely.
4.3 Connecting Power and Safety Rope
- Connect the power adapter to the robot and then plug the power cord into a suitable electrical outlet (220V-240V).
- Securely attach the safety rope to the designated anchor point on the robot and to a sturdy fixture indoors.
4.4 App Installation and Pairing (Optional)
- Download the FMART app from your smartphone's app store (available for iOS and Android).
- Follow the in-app instructions to pair your FMART T11 robot via Bluetooth or Wi-Fi.
- The app supports 10 languages and offers real-time control, cleaning mode settings, voice prompt control, and OTA updates.
5. Operating Instructions
5.1 Starting the Robot
- Place the robot on the window surface, ensuring it has a flat area to adhere.
- Press the power button on the robot or the remote control to activate the suction. The robot will firmly adhere to the glass with 5300Pa suction power.
- Once suction is stable, press the start button on the robot, remote, or app to begin cleaning.
5.2 Cleaning Modes
The FMART T11 offers three cleaning modes:
- Quick Clean: A single pass for light dirt.
- Deep Clean: Two passes for more thorough cleaning, ideal for stubborn stains.
- Spot Clean: Focuses on a specific area for intensive cleaning.
You can select these modes via the remote control or the smartphone app. The robot uses an inter-rotational movement zigzag route for efficient coverage.
5.3 Ultrasonic Water Spray
The robot features a quadruple 4-way ultrasonic atomization system that sprays ultra-fine mist (12µm) to moisten the cleaning surface. This prevents dripping and helps soften stains for more effective cleaning. The spray system operates automatically during cleaning.
5.4 Versatility
The FMART T11 is suitable for various window and surface types, including:
- Small Windows
- Frameless Windows
- Bathroom Mirrors & Glass
- Kitchen Backsplashes
- Floor-to-Ceiling Windows
- Glass, Marble, Tiles, Mirrors, Wooden Doors
6. Maintenance
6.1 Cleaning Cloths
- After each use, remove the cleaning cloths from the robot.
- Wash the cloths with water and mild detergent. They are reusable.
- Ensure cloths are completely dry before reattaching them for the next cleaning session.
6.2 Water Tank
- Empty any remaining water from the tank after use.
- Rinse the tank with clean water periodically to prevent residue buildup.
6.3 Robot Body
- Wipe the exterior of the robot with a soft, dry cloth to remove dust and debris.
- Ensure the suction ports and sensors are clean and free from obstructions.
7. Troubleshooting
If you encounter issues with your FMART T11, please refer to the following common problems and solutions:
- Robot not adhering to the window:
- Ensure the window surface is clean and dry.
- Check if the suction ports are blocked by dirt or debris.
- Verify the power connection is stable.
- Robot not spraying water:
- Check if the water tank is filled.
- Ensure the spray nozzles are not clogged.
- Robot moving erratically or getting stuck:
- Clean the edge detection sensors.
- Ensure the cleaning cloths are properly attached and not interfering with movement.
- Restart the robot and try a different cleaning mode.
- App connectivity issues:
- Ensure your smartphone's Bluetooth/Wi-Fi is enabled.
- Restart the robot and your smartphone.
- Refer to the 'Installation Guide & Troubleshooting' section within the FMART app.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | FMART |
| Model | T11 |
| Type | Window Cleaning Robot |
| Color | White |
| Shape | Round |
| Suction Power | 5300Pa (Adjustable) |
| Cleaning Speed | 2.36 in/s (Enhanced) |
| Cleaning Area per Refill | Up to 538 sq. ft. (60 sq. meters) |
| Cleaning Mode | Inter-rotational Movement Zigzag Route (Quick, Deep, Spot Clean) |
| Auto-spray System | Quadruple, Ultrasonic, 12µm Ultra-Fine Spray |
| Water Tank Capacity | 100ml (Removable) |
| App Control | iOS/Android (10-Language Support) |
| Voice Prompt | Yes (10 languages) |
| Power | 72W |
| Battery Capacity | 750mAh |
| UPS Backup | 20 minutes |
| Safety Rope Length | 4m |
| Slim Design | 60mm |
| Noise Level | < 60 dB |
| Voltage | 220V-240V |
| Certification | CE |
| Product Weight | 1kg |
| Product Dimensions (L x W x H) | 292 × 144 × 58mm |
9. User Tips
- For heavily soiled windows, consider a preliminary wipe-down to remove loose dirt before using the robot for a streak-free finish.
- Use distilled water or a manufacturer-recommended cleaning solution to prevent mineral buildup in the spray nozzles.
- Regularly check and clean the robot's sensors to ensure optimal navigation and edge detection.
- Ensure the power cord is long enough for the entire cleaning area, or use an appropriate extension cord if necessary, always keeping safety in mind.
10. Frequently Asked Questions (FAQ)
- Q: Can the FMART T11 clean frameless windows?
- A: Yes, the FMART T11 is equipped with advanced edge detection sensors that allow it to safely clean frameless windows and glass surfaces.
- Q: What kind of cleaning solution can I use?
- A: You can use clean water or a mild, non-foaming window cleaning solution. Avoid harsh chemicals that could damage the robot or leave streaks.
- Q: How long does the battery last during a power outage?
- A: The built-in UPS system provides up to 20 minutes of backup power, allowing the robot to remain attached to the window for safe retrieval.
- Q: Is the robot noisy during operation?
- A: The FMART T11 operates at a noise level of less than 60 dB, which is comparable to a normal conversation, ensuring a relatively quiet cleaning experience.
11. Warranty and Support
The FMART T11 Window Cleaning Robot comes with a 1-year warranty from the date of purchase. For technical support, troubleshooting assistance, or warranty claims, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific contact details.