1. Introduction
The XY-T6001P is a high-performance Mono 600W Bluetooth Amplifier Board Module featuring the TPA3255 chip. It supports TWS true wireless stereo pairing, Bluetooth 5.0 with dual decoding (ACC/SBC), and multiple audio input methods including Bluetooth, AUX, and USB. Designed for robust and stable performance, it is ideal for home Hi-Fi systems, outdoor stages, car audio setups, and various DIY amplifier projects.
2. Product Features
- High Power Output: Features the TPA3255 chip with 600W peak power for robust and stable drive performance.
- TWS Stereo Pairing: Supports True Wireless Stereo (TWS) for pairing two amplifier boards to create a stereo system.
- Advanced Bluetooth: Bluetooth 5.0 with dual decoding (ACC/SBC) for stable, lossless audio transmission and ultra-low power consumption.
- Enhanced Thermal Management: Includes dedicated digital inductors, aluminum heat sinks, and a 60x60mm silent fan for stable and sustained full-power output.
- Multiple Audio Inputs: Supports Bluetooth, AUX (3.5mm), and USB audio input (MP3/WAV/FLAC/APE).
- Versatile Application: Suitable for home Hi-Fi, outdoor stages, car audio systems, or DIY amplifier projects.
- Dual-Antenna Design: Unique dual-antenna design for stronger signal and greater range.
3. Specifications
| Attribute | Value |
|---|---|
| Product Name | TWS BT Digital Audio Amplifier Board |
| Product Model | XY-T6001P |
| Brand Name | XinYi Sini Audio |
| Supply Voltage | DC 19-51V/10A |
| Audio Input | Bluetooth/AUX/USB |
| Bluetooth Audio Decoding | SBC/AAC |
| USB Audio Decoding | WAV/FLAC/APE/MP3 |
| Operating Temperature | 0-50°C |
| Package Type | SOP |
| Product Weight | 0.41 kg |
| Product Dimensions (Integrated Potentiometer Version) | Front Panel: 141.60mm x 37.60mm Main Board: 120.00mm x 95.50mm |
Output Power by Voltage:
| Supply Voltage | Output Power (8Ω) | Output Power (4Ω) | Output Power (2Ω) |
|---|---|---|---|
| DC 24V | 30W | 70W | 150W |
| DC 36V | 80W | 160W | 350W |
| DC 50V | 160W | 300W | 600W |
4. Setup and Installation
4.1 Component Overview

The amplifier board features multiple interfaces and an enhanced cooling system. Key components include a capacitor array, audio special inductors, 3.5mm AUX input, USB Audio input, NE5532*2 op-amps, solid capacitance, and a TWS BT Chip (AAC SBC).
4.2 Wiring and Connections

- Power Supply: Connect a DC 19-51V power supply to the (5.5-2.5mm) DC input jack. Ensure the power supply can provide at least 10A.
- Speakers: Connect your speakers to the SPK- and SPK+ terminals.
- External Antenna (Optional): An external 2.4GHz antenna can be installed via the first-generation IPEX interface for improved Bluetooth range.
- Audio Inputs: The board supports 3.5mm AUX, USB flash drive, and Bluetooth audio inputs.
4.3 Physical Installation

Refer to the provided dimensions for integrating the amplifier board into your enclosure or project. The front panel measures 141.60mm x 37.60mm, and the main board is 120.00mm x 95.50mm. The potentiometers are spaced 19mm apart.
5. Operating Instructions
5.1 Basic Operation
- Power On/Off: Use the dedicated power on/off switch. The Power LED will indicate status.
- Volume Control: Adjust the Bass volume, Treble volume, and Main Volume (VOL) knobs to your preference.
- Multifunction Knob: This knob provides various controls:
- Click: Pause/Play
- Double-click: Next track
- Triple-click: Mode switch
- Quadruple-click: Pair/Unpair TWS
- Quintuple-click: Factory Reset
- Long-press: Power on/off
5.2 Bluetooth Connection

- Turn on Bluetooth on your mobile phone or device.
- Search for available devices and select "XinYi" to pair and play music.
- For advanced control, search and pair with "Sinilink-APP" to manage the amplifier board via the application.
5.3 Sinilink APP Usage

The Sinilink APP allows you to customize settings such as changing the Bluetooth name and setting a pairing password. After making changes, remember to click the "Set" button to apply them.
5.4 TWS Stereo Pairing

TWS technology enables two amplifier boards to form a stereo system. This product can losslessly mix dual channels into a single channel while simultaneously supporting two amplifier boards for stereo pairing.
TWS Container Handling Instructions:
- Place both amplifier boards in the desired location. The blue indicator light on both boards will flash rapidly (do not pair with phone Bluetooth, connect AUX, or insert a USB drive at this stage).
- Quickly press the volume knob on one amplifier board 4 times consecutively. The TWS red indicator light on this unit will begin to flash rapidly. The other unit will continue to show a rapid blue flashing indicator.
- Wait until the TWS red indicator on the first unit changes from rapid flashing to steady illumination (this unit becomes the Master, Left channel). The other unit's blue indicator will turn off, and its red indicator will begin slow flashing (this unit becomes the Slave, Right channel). This indicates successful TWS pairing.
- If the red indicator turns off during step 3, pairing has failed. Repeat the 4-tap volume knob procedure to reconnect TWS.
- After successful TWS pairing, enable your phone's Bluetooth, search for "XinYi," and connect. You can now play music from your phone, or alternatively, insert an AUX cable or USB drive to play music.
Canceling TWS Pairing:
During TWS pairing, press the volume knob on either amplifier board four times consecutively to exit TWS pairing mode.
Important Notes for TWS:
- When using the TWS pairing function, establish the TWS connection first before pairing with your phone's Bluetooth.
- The TWS pairing function operates in memory mode; the TWS connection will automatically resume upon the next power-on.
6. Maintenance
6.1 Cooling System

The amplifier board is equipped with a 60x60mm heat sink and a silent fan to ensure long-lasting and efficient cooling, which is crucial for sustained full-power output. Ensure the fan is not obstructed and keep the board free from dust to maintain optimal performance.
6.2 Preamp Gain Adjustment

The preamp gain is set by the ratio R/10K, with a factory default of 15K. The factory default settings are designed to meet most usage scenarios. For any modifications to the preamp gain, please consult our technical support team to avoid potential damage or performance issues.
7. Troubleshooting
- No Power: Ensure the DC power supply is correctly connected and within the 19-51V range. Check the power switch.
- No Sound: Verify speaker connections (SPK+/SPK-), check audio input source (Bluetooth, AUX, USB), and ensure volume knobs are not at minimum.
- Bluetooth Connection Issues: Make sure the amplifier board is in Bluetooth mode. On your device, turn Bluetooth off and on, then search for "XinYi" and try pairing again. Ensure no other devices are connected.
- TWS Pairing Failure: Follow the TWS pairing instructions carefully. If pairing fails, repeat the 4-tap volume knob procedure on the master unit. Ensure both boards are powered on and not connected to other audio sources during the initial pairing.
- Poor Audio Quality/Range: Ensure the external 2.4GHz antenna is properly installed if using one. Check for interference from other wireless devices.
8. User Tips
- Always use a stable power supply within the specified voltage range (DC 19-51V) and sufficient current (10A) to ensure optimal performance and prevent damage.
- When connecting speakers, pay attention to impedance matching to avoid overloading the amplifier.
- For best Bluetooth range and stability, consider installing an external 2.4GHz antenna.
- If experiencing issues with the Sinilink APP, ensure your phone's location permissions are granted for the app.
9. Warranty and Support
For warranty information, technical support, or any questions not covered in this manual, please contact the seller or manufacturer directly. You may also refer to the official user manual PDF for additional details: View User Manual (PDF).
10. Product Demonstration Video
Watch this video for a demonstration of the XY-T6001P Bluetooth Amplifier Board Module in action, including mono mode and TWS stereo pairing tests.