BAOFENG M4

Contents

BAOFENG M4 High-Power Wireless Walkie-Talkie User Manual

Model: M4 | Brand: BAOFENG

1. Introduction

Thank you for choosing the BAOFENG M4 High-Power Wireless Walkie-Talkie. This device is designed for reliable and clear communication in various environments, including outdoor activities, construction sites, hotels, and security operations. This manual provides essential information for the safe and efficient use of your walkie-talkie. Please read it thoroughly before operation.

2. Safety Information

  • Do not operate the radio in explosive atmospheres (e.g., flammable gases, dust particles, metallic powders).
  • Do not transmit without an antenna attached.
  • Keep the radio away from medical devices to avoid interference.
  • Use only BAOFENG approved batteries and chargers.
  • Do not expose the radio to direct sunlight for extended periods or to extreme temperatures.
  • Avoid disassembling the radio; repairs should only be performed by qualified personnel.

3. Package Contents

Please check the package contents carefully. If any items are missing or damaged, contact your retailer.

  • BAOFENG M4 Walkie-Talkie Unit
  • Antenna
  • Lithium Battery
  • USB Charging Cable
  • Belt Clip (may be pre-attached or separate)
  • User Manual (this document)

4. Product Overview

Familiarize yourself with the components of your BAOFENG M4 walkie-talkie:

BAOFENG M4 Walkie-Talkie Front View
Figure 4.1: Front view of the BAOFENG M4 Walkie-Talkie.
Multiple views of BAOFENG M4 Walkie-Talkie showing controls and ports
Figure 4.2: Various angles of the BAOFENG M4, highlighting controls like the PTT button, volume/power knob, channel selector, and charging port.
  • Antenna: For transmitting and receiving signals.
  • Power/Volume Knob: Rotate to turn the radio on/off and adjust volume.
  • Channel Selector Knob: Rotate to select one of the 16 available channels.
  • PTT (Push-to-Talk) Button: Press and hold to transmit, release to receive.
  • Speaker/Microphone: For audio output and input.
  • Accessory Jack: For connecting external audio accessories (e.g., headset).
  • USB Charging Port: For charging the battery.

5. Setup

5.1. Installing the Battery

  1. Align the battery pack with the grooves on the back of the radio.
  2. Slide the battery pack upwards until it clicks into place.
  3. To remove, press the battery release latch (if present) and slide the battery downwards.

5.2. Attaching the Antenna

  1. Screw the antenna into the connector on the top of the radio by turning it clockwise until it is firm.
  2. Do not overtighten.

5.3. Charging the Battery

The BAOFENG M4 supports USB rapid charging.

  1. Connect the USB charging cable to the radio's USB port.
  2. Connect the other end of the cable to a compatible USB power adapter (not included) or a computer USB port.
  3. The indicator light (if present) will show charging status. Charge fully before first use.

6. Operating Instructions

6.1. Power On/Off and Volume Adjustment

  1. To turn on the radio, rotate the Power/Volume knob clockwise until you hear a click.
  2. Continue rotating clockwise to increase the volume. Rotate counter-clockwise to decrease volume.
  3. To turn off the radio, rotate the Power/Volume knob counter-clockwise until you hear a click.

6.2. Selecting a Channel

Rotate the Channel Selector knob to choose one of the 16 available channels. Ensure all radios in your group are on the same channel for communication.

6.3. Transmitting and Receiving

  1. To transmit, press and hold the PTT (Push-to-Talk) button. Speak clearly into the microphone.
  2. Release the PTT button to stop transmitting and return to receive mode.
  3. When receiving a signal, the radio will automatically output audio through the speaker.

6.4. Advanced Features

  • CTCSS/DCS: The radio supports 50 Groups of CTCSS and 105 Groups of standard DCS for interference reduction. These codes must be programmed via PC.
  • Time-out Timer (TOT): Prevents accidental continuous transmission by limiting the duration of each transmission.
  • Battery Saving Function: Automatically reduces power consumption when no signal is being received or no operation is performed.
  • Alarm Function: For emergency situations (specific activation method may require PC programming).
  • PC Programmable: Channels, frequencies, and other advanced settings can be customized using dedicated PC software and a programming cable (sold separately).

7. Maintenance

7.1. General Care

  • Wipe the radio with a soft, damp cloth to clean. Do not use harsh chemicals or solvents.
  • Keep the radio dry. If it gets wet, wipe it immediately and allow it to air dry completely before use.
  • Avoid dropping the radio or subjecting it to strong impacts.

7.2. Battery Care

  • Do not short-circuit the battery terminals.
  • Do not dispose of batteries in fire.
  • If the radio will not be used for an extended period, remove the battery and store it in a cool, dry place.

8. Troubleshooting

Problem Possible Cause Solution
No power Battery not installed correctly or discharged. Reinstall battery, charge battery.
Cannot transmit or receive Wrong channel, out of range, antenna loose. Verify channel, move closer, check antenna connection.
Poor audio quality Low battery, interference, volume too low. Charge battery, move away from interference sources, adjust volume.
Radio continuously transmits (stuck PTT) PTT button stuck or internal fault. Check PTT button. If problem persists, contact support.

9. Specifications

The following table details the technical specifications of the BAOFENG M4 walkie-talkie. Note that specifications are subject to continuous improvement and may vary slightly. Refer to the physical product for exact details.

Detailed technical specifications table for BAOFENG M4 walkie-talkie
Figure 9.1: Detailed technical specifications.
Feature Specification
Frequency Range UHF: 400-470 MHz (Dual Band: 430-440MHz, Commercial FM Radio Reception: 65MHz-108MHz)
Number of Channels 16
CTCSS/DCS 50 Groups CTCSS, 105 Groups of standard DCS
RF Output Power ≤5W
Working Voltage 3.7V
Battery Type Lithium Battery (5800mAh capacity from image)
Standby Time Up to 22 days
Frequency Stability ±2.5ppm
Operating Temperature -20°C ~ +50°C
Antenna Impedance 50Ω
Dimensions (H×W×D) 60x36x120mm (excluding antenna)
Weight Approx. 183g (including battery and antenna)
Output Consumption ≤1.2A
Modulation Sensitivity 8-12mV
Spurious Emission ≤7.5uW
Adjacent Channel Power ≤-65dB or ≤-60dB
Maximum Deviation ≤±5KHz / ≤±2.5KHz
Emission Class 16KF3E/11KF3E
Signal-to-Noise (Wide/Narrow) ≥-45dB / ≥-40dB
Receive Sensitivity -122dBm (12dB SINAD)
Intermediation (Wide/Narrow) ≥65dB/≥60dB
Adjacent Channel Selectivity ≥65dB/≥60dB
Audio Power 0.4W (8Ω Load)
Audio Distortion <10%
Receive Current ≤380mA

10. User Tips

  • For optimal range, ensure your antenna is securely attached and you have a clear line of sight to other radios.
  • Regularly check battery levels, especially before extended use, to avoid communication interruptions.
  • Consider using a headset (sold separately) for hands-free operation and improved audio clarity in noisy environments.
  • If experiencing interference, try switching to a different channel or enabling CTCSS/DCS tones (requires PC programming).

11. Warranty and Support

BAOFENG products are manufactured to high-quality standards. For warranty information and technical support, please refer to the documentation provided with your purchase or contact your local dealer. Keep your proof of purchase for warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.